Dimplex RPX Series User manual



ContactDetails

Pleasenotethatsomeofthecontactdetailson
thisPDFdocumentmaynotbecurrent.

Pleaseusethefollowingdetailsifyouneedto
contactus:

Telephone:08448793588
Email:[email protected]


Thecustomersupportsectionofourwebsitealsofeaturesawide
rangeofinformationwhichmaybeofusetoyouandisavailable
24hoursaday.Itincludes:

•Operatingandinstallationinstructions
•Easy‘Howtouse’guidesforstorageheaters
•Serviceandrepairs
•Wheretobuyourproducts
•Literaturedownloads
•Heatingrequirementcalculator

Visit‐www.dimplex.co.uk/support
A division of GDC Group Ltd
Millbrook House Grange Drive Hedge End Southampton SO30 2DF
www.dimplex.co.uk
Re
g
istered No: 1313016 En
g
land
VAT GB 287 1315 50004
EEE Producer Registration Number –
WEE/GE0057TS
Paper from sustainable sources

Quick Start Guide
RPX Electronic Radiant Panel Radiator QS021
This guide is for quick reference only. Refer to the RPXN installation and operating instructions for further information
RPX radiant panel radiator General
Dimplex UK Ltd, Millbrook House, Hedge End, Southampton, SO30 2DF. For further assistance please contact Dimplex customer services on 0845 600 5111. Web-site: www.dimplex.co.uk
Heater controls
• Use the heater in comfort mode when the room is
occupied.
• Use the heater in set back (background) mode when the
room is unoccupied. It is more energy efficient to do this than
switch the heater off.
• Use the heater in frost protection mode if you are away
for long periods of time.
(A) Function selector: see table below for functions available
(B) Function display: will illuminate to show which function
has been selected with the function selector
(C) Thermostat: set the thermostat control to the appropriate
position to give comfort level required. Heater will switch on
and off as necessary, and a higher setting will make the
room warmer.
(D) Thermostat indicator: will illuminate to show when heater
is delivering heat
(E) Cover opening tab
*Note: If the programme function is selected but no programming device is being used, the heater will function in comfort mode.
Symbol Function Description
Comfort Heater will maintain the temperature set on the thermostat
dial
Background (setback) Heater will maintain a lower temperature level for background
heating (preset to –3.5ºC)
0 Off Heater will not function
Programme Heater will be controlled by a programming device
Function selector table