Dini Argeo LTP User manual

www.diniargeo.com
LTP
Hydraulic weighing system for forklift truck
ENGLISHOPERATING INSTRUCTIONS

3
Optimized layout for A4 print.
USER_MAN_ENG_LTP
Contents
Introduction 4
Warnings 4
Display and keyboard 5
Accuracy factors 7
Weight reading 8
Basic functions 8
Ignition - On 8
Switching off 9
Zero 9
Adjusting the display brightness 9
Auto-weighted tare 10
Tare cancellation 10
Setting a known tare value (PT) 11
Print 12
Metric information 12
Additional functions for models with numeric keypad 13
Archive 30 tares 13
Automatic tare cancellation 14
Numeric IDs 15
Date and time 16
Printing (and reprinting of the last receipt) 17
Metric information 18
Advanced scale functions 19
How to enter the functions menu 19
Horizontal totalization 20
Exchange between net and gross weight 22
Unit of measure conversion 23
Configuration menu 25
Maintenance 30
Replacing the printer paper roll 30

Optimized layout for A4 print.
4
USER_MAN_ENG_LTP
Dear customer,
Thank you for purchasing a DINI ARGEO product.
This manual explains the usage of the hydraulic weighing system for forklift trucks.
In particular, zero, tare and all the function of the weighing electronic are described, to assist the forklift driver during use.
For any additional information or specific requests, please contact your local dealer.
This publication is optimized for A4 printing.
Introduction
• The weighing system does not change the safety regulations normally applied to the forklift truck.
• Before weighing, make sure that the lift truck is stationary, on a flat surface and that there are no people in the area around the load.
• The employee training on the use of the system is the purchaser’s responsibility.
• Please read this manual carefully before using the system.
• Assistance must only be carried out by personnel authorized by Dini Argeo.
• Dini Argeo is not responsible for any weighing errors resulting from improper use of the system.
Warnings

5
Optimized layout for A4 print.
lb
1
2
3
5
6
4
7 8
10
9
USER_MAN_ENG_LTP
POS. ICON DESCRIPTION
1Indicates that the scale is unloaded (gross zero).
2Indicates that the weight is unstable.
3The net weight is displayed.
note: there is a tare in memory.
4 / 5 The gross weight is displayed.
6Indicates the battery level:
7AND activates a locked tare.
8AND activates a manual tare.
9lb ... kg Indicates the units of measurement: pounds (lb), tonnes (t), kilograms (kg), grams (g).
10 Indicates when a key is pressed. In some operating modes it indicates the activation of
a specific function.
11 ---- Weight acquisition phase.
Display and keyboard

Optimized layout for A4 print.
6
USER_MAN_ENG_LTP
WARNING!
For a clearer view and advanced key and mode functions, see the chapter “BASIC FUNCTIONS” and “ADVANCED FUNCTIONS”.
Button Description
• Resets the weight value on the scale.
• If pressed for a long time (2 sec), it allows you to set the brightness of the display.
• Performs tare on the scale.
• If pressed for a long time (2 sec) it allows you to insert a preset tare.
• Recalls the function specific to the operating mode.
• If pressed for a long time (5 sec) it allows you to change the operating mode.
• Confirm key.
• Print the receipt.
• If pressed for a long time (5 sec) it allows you to enter the configuration menu.
• If pressed for 2 seconds, it turns o the instrument.
• If pressed for 5 sec it shows the metrological information.
If pressed and held (2 sec) it shows the metrological information.
Performs the function (followed by pressing a number).
Allows you to quickly set a numeric value.

7
Optimized layout for A4 print.
USER_MAN_ENG_LTP
The system is based on the measurement of the oil pressure contained in the hydraulic lifting circuit by means of a specific sensor. This
pressure depends on the load on the forks and the height of the forks themselves, which is why the weighing operations must always be
carried out at the same height (indicated by the stickers).
The theoretical precision of the LTP system, correctly installed on suitable forklifts and used under optimal conditions, varies from
0.5% to 5% of the capacity (min. 20 kg).
This accuracy is adversely aected by the following factors:
Type and state of wear of the forklift.
- 10° C
+ 50° C
Ambient temperature: the temperature range of the sensor is from - 10° C to + 50° C.
Mechanical friction: keep sliding parts clean and lubricated.
Oil leaks.
Load position on the forks: the gravity centre of the load must be positioned in the centre of the
forks.
Tilt of the forks: for proper weighing, position the forks at 90° to the ground.
Lifting speed: lift the load at a constant speed and without sudden dashes so as to avoid jolts.
Position of the sensor inside the hydraulic circuit. Refer to the technical manual for sensor instal-
lation.
Type of oil in the hydraulic circuit: use oils with low viscosity and suitable for a wide temperature
range.
Accuracy factors

Optimized layout for A4 print.
8
B
AB
C
C
0
AC
0550 ----
USER_MAN_ENG_LTP
Basic functions
Ignition - On
Visualization Display:
Condition of the forklift truck:
Visualization Display:
Condition of the forklift truck:
Visualization Display: Visualization Display:
Condition of the forklift truck: Condition of the forklift truck:
Visualization Display:
Condition of the forklift truck:
Weight reading
Before turning on the indicator, make some lifting with empty forks (at least 5) to heat the oil temperature inside the hydraulic circuit.
With the forks down (without touching the ground), turn on the weight indicator and wait for it to zero.
During load acquisition the display shows: ----
At the end of the acquisition, the weight is shown.
Between weighings it is necessary to return the weight to 0 by unloading and lowering the forks.

9
Optimized layout for A4 print.
A
A
B
B
C
C
0
0
40
-off-
C
A B C
brGt 0
0
USER_MAN_ENG_LTP
Zero
Visualization Display:
Visualization Display:
Condition of the forklift truck:
Condition of the forklift truck:
Visualization Display:
Visualization Display:
Condition of the forklift truck:
Condition of the forklift truck:
Switching off
ZERO
Press
for 2 s
Adjusting the display brightness
Visualization Display:
Condition of the forklift truck:
ZERO
Press
for 2 s
Visualization Display:
Set the brightness value:
Increase value
Decrease value
Confirm

Optimized layout for A4 print.
10
A B C
-50 0
TARE
=+
? kg ? kg
A
D
B
E
C
50 0
2000
TARE
USER_MAN_ENG_LTP
Tare cancellation
Visualization Display:
Condition of the forklift truck: Condition of the forklift truck:
Visualization Display:
Visualization Display:
Visualization Display:
Condition of the forklift truck:
Condition of the forklift truck:
Visualization Display:
Condition of the forklift truck:
Auto-weighted tare
Visualization Display:
Condition of the forklift truck:

11
Optimized layout for A4 print.
200 kg
50 kg
A B
i
0 9
...
TARE
BA
DE
C
F
=+
? kg50 kg
0
-50 200
000050
TARE
USER_MAN_ENG_LTP
Enter the tare value:
If the indicator has a numeric keypad, you can enter the tare quickly:
Visualization Display:
Condition of the forklift truck:
Visualization Display:
Visualization Display:
Set the tare value:
Condition of the forklift truck:
Setting a known tare value (PT)
Visualization Display:
Condition of the forklift truck:
CONFIRM
Press
for 2 s
Increase/
decrease the value

Optimized layout for A4 print.
12
A B C
NUM. WEIGHED 1
TARA
RECEIPT NO. 54321
15/11/2018 15:39:03
GROSS 15.000 kg
NET
3.000 kg
12.000 kg
200 print
PRINT
A B C
INFo
C
0100 5
2000
0TARE
USER_MAN_ENG_LTP
Visualization Display:
Condition of the forklift truck:
Visualization Display:
Condition of the forklift truck:
Print
Metric information
Visualization Display:
Condition of the forklift truck: Condition of the forklift truck:
Visualization Display:
Press
for 4 s

13
Optimized layout for A4 print.
A
D
B
E
C
F
0 t.01
000050
10 kg 20 kg 50 kg
F 9
0 9
...
0 9
...
PRINT PRINT
USER_MAN_ENG_LTP
Additional functions for models with numeric keypad
Allows you to store the most used tares (up to 30), to simplify the activation through quick recall.
Example
Archive 30 tares
Visualization Display:
Condition of the forklift truck:
Visualization Display:
Visualization Display:
HOW TO STORE A TARE
Select the memory:
Set the tare value:
Increase /
Decrease value
Increase /
Decrease value
Enter the value
Enter the value
or
or

Optimized layout for A4 print.
14
A
A
D
B
B
E
C
C
0Fun 2
250 Fun 1
Ta-L
Ta-u
t.01
200
0 9
...
PRINT
F 1
F 2
USER_MAN_ENG_LTP
Automatic tare cancellation
Visualization Display: Visualization Display:
Visualization Display: Visualization Display:
Condition of the forklift truck:
Condition of the forklift truck:
Condition of the forklift truck:
Visualization Display:
Visualization Display:
Visualization Display:
HOW TO RECALL A STORED TARE
Select the memory:
Increase /
Decrease value
Enter the value
or
Cancellation
automatically deactivated.
Automatic cancellation active:
the tare is automatically
cancelled once the forklift
truck is unloaded.

15
Optimized layout for A4 print.
A B C
iidn
0Fun 3
F 3 1 2
D E F
iidn 000000
1
0 9
...
PRINT
USER_MAN_ENG_LTP
Numeric IDs
Visualization Display: Visualization Display:
Condition of the forklift truck:
Visualization Display:
The instrument has 2 memories for the temporary recording of numerical codes that can be used to identify the
product, the operator, the batch, etc.. These codes, if inserted, will be shown on the receipt at the time of printing.
HOW TO INSERT THE ID
Select the memory:
Enter the value
Visualization Display: Visualization Display:
Enter the desired ID
(up to 10 numeric digits):
Enter the value
or
Increase /
Decrease value
or

Optimized layout for A4 print.
16
A
A
B
B
C
C
iidn
0
0
Fun 4
Fun 8
F 4
F 8
1 2
D E
iidn id1L
1
day
month
year
hour
Minute
id1u
i
i
USER_MAN_ENG_LTP
Date and time
Visualization Display:
Visualization Display:
Visualization Display:
Visualization Display:
Condition of the forklift truck:
Condition of the forklift truck:
Visualization Display:
Select the memory:
Enter the value
Visualization Display: Visualization Display:
HOW TO ACTIVATE THE AUTOMATIC DELETION OF THE ID
Cancellation
automatically deactivated.
Automatic deletion
active: the entered ID will be
deleted automatically once the
forklift truck is unloaded.
Numeric IDs are automatically reset when the scale is turned o.
Only if the date and time option is present.
or

17
Optimized layout for A4 print.
A
A
B
B
C
NUM. WEIGHED 1
TARA
RECEIPT NO. 54321
15/11/2018 15:39:03
GROSS 15.000 kg
NET
3.000 kg
12.000 kg
NUM. WEIGHED 1
TARA
RECEIPT NO. 54321
15/11/2018 15:39:03
GROSS 15.000 kg
NET
3.000 kg
12.000 kg
200 print
print
PRINT
PRINT
F
USER_MAN_ENG_LTP
Printing (and reprinting of the last receipt)
PRINT
REPRINTING THE LAST RECEIPT
Visualization Display:
Condition of the forklift truck:
Visualization Display:
Visualization Display:
Condition of the forklift truck:
Condition of the forklift truck:

Optimized layout for A4 print.
18
A B C
INFo
0
C
0100 52000
USER_MAN_ENG_LTP
Metric information
Visualization Display:
Condition of the forklift truck: Condition of the forklift truck:
Visualization Display:
Press
for 4s
Press
for 2s

19
Optimized layout for A4 print.
BA C
0funCt
MODE
D
HI.RES
PerC
CheCk
Conver
total
formul
Count
net.Gro
HoLD
USER_MAN_ENG_LTP
Advanced scale functions
How to enter the functions menu
0
Sum of the weight of multiple objects
to know the total weight
Horizontal totalization
Once you have chosen the
function, the scale returns
to the weighing mode.
Exchange net weight / gross weight
Unit of measure conversion
Visualization Display:
Condition of the forklift truck:
Visualization Display:
The indicator has entered into the
configuration menu: the currently
active function will appear.
Press
for 5 s

Optimized layout for A4 print.
20
P1 P2 P3
+ +
NUM. WEIGHED 00000001
NET
NUM. WEIGHED 00000002
NET
NUM. WEIGHED 00000003
NET
100 kg
200 kg
180 kg
NUM. WEIGHED 00000001
NET
NUM. WEIGHED 00000002
NET
100 kg
200 kg
NUM. WEIGHED 00000001
NET
100 kg
A B C
100 t. 1
PRINT
NUM. WEIGHED 00000001
NET
100 kg
D E F
200 t. 2
PRINT
P1
P2 P2
G H I
180 t. 3
PRINT
P3 P3
NUM. WEIGHED 00000001
NET
NUM. WEIGHED 00000002
NET
NUM. WEIGHED 00000003
NET
100 kg
200 kg
180 kg
NUM. WEIGHED 00000001
NET
NUM. WEIGHED 00000002
NET
100 kg
200 kg
USER_MAN_ENG_LTP
Horizontal totalization
Visualization Display:
Condition of the forklift truck:
P1
Condition of the forklift truck:
Visualization Display:
HOW TO ADD UP THE WEIGHINGS
Visualization Display:
Condition of the forklift truck: Condition of the forklift truck:
Visualization Display:
Visualization Display:
Condition of the forklift truck: Condition of the forklift truck:
Visualization Display: