Disc Makers ReflexMax1 User manual

1-888-800-4041 www.discmakers.com T
T
ReflexMax CD User Guide
Version 2.1

1-888-800-4041 www.discmakers.com T
01
Copyright Info
COPYRIGHT
Copyright 2005 by Disc Makers. All rights reserved. This item and the informa-
tion contained herein are the property of Disc Makers. No part of this document
may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, manual, or other-
wise, without the express written permission of Disc Makers.
DISCLAIMER
Disc Makers makes no representation or warranties with respect to the con-
tents of this document and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Further, Disc Makers
reserves the right to revise this publication without obligation of Disc Makers
to notify any person or organization of such revision or changes.
REVISION HISTORY
Revision Date Description
1.1 10/31/2003 Updates by Disc Makers Technical Staff
2.1 01/06/2005 Updates by Disc Makers Technical Staff
CONTACTING DISC MAKERS, USA
Disc Makers
7905 North Route 130
Pennsauken, NJ 08110-1402
1-888-800-4041
TRADEMARK NOTICES
All product names are trademarks or registered trademarks of their respective
owners. Disc Makers and the Disc Makers logo © Disc Makers

WELCOME
Congratulations on the purchase of your Disc Makers ReflexMax duplication
system. This sturdy unit has been professionally designed and manufactured
under strict quality guidelines to provide you with years of dependable and
trouble-free operation. Please be sure to read this instruction guide thoroughly
before operating the unit.
TECHNICAL SUPPORT
Disc Makers backs your duplicator purchase with free lifetime technical sup-
port. Tech support hours are from 9:00 a.m. to 6:00 p.m. EST Monday through
Friday at 1-888-800-4041. Or you can email our tech support team at:
[e-mail]. For FAQs, downloadable manuals, product
updates, and warranty registration, go to www.discmakers.com/support.
To chat online live with a technical specialist, go to
www.discmakers.com/support.
WARRANTY
Disc Makers warrants to the original purchaser that the duplication equipment
you have purchased is free from defects in materials and workmanship for a
period of one year. This warranty is applicable when the warranty registration
has been completed and returned to Disc Makers within a reasonable period of
time following the purchase. This warranty is not transferable.
This warranty does not apply to malfunctions caused by misuse, negligence,
accident, or alteration. Disc Makers is not responsible for or liable for conse-
quential damages related to the use or misuse of this equipment. Disc Makers’
liability under this warranty extends solely to the obligation to repair or replace
a covered product. Disc Makers’ liability under this warranty shall not exceed
the cost of the covered product.
WARRANTY REPAIR
Any item that needs to be returned for a warranty repair must be returned in
the original packaging. You must call Disc Makers for a return authorization
number (RMA) before returning any product. In the event that the original
packaging has been discarded, you can purchase replacement packaging from
Disc Makers. The sender will be responsible for any damage incurred if product
is not returned in original or replacement packaging. To obtain replacement
packaging, call Disc Makers technical support at 1-888-800-4041 with the
model of your duplicator.
PLEASE NOTE:
The copying of audio, video, or software without the permission of the copy-
right holder is illegal. Disc Makers accepts no responsibility for the copyright
use or misuse of this equipment. It is the sole responsibility of the user to
ensure that the legal rights of the copyright owners are respected.
1-888-800-4041 www.discmakers.com T
02
Warranty

NEED BLANK MEDIA OR SUPPLIES?
Disc Makers offers a range of top-quality blank CD-Rs, DVD-Rs, and DVD+Rs at
unbeatable prices, including our own Disc Makers Ultra brand. We also have an
extensive line of packaging and mailing supplies, as well as inkjet cartridges
and other peripherals for your duplication and printing system. For the latest
products and lowest prices, shop securely online at www.discmarket.com, or
call 1-888-800-4041.
CUSTOM PRINTING ON BLANK CD-RS
AND DVD-RS— IN JUST 5 DAYS!
Disc Makers gives you the same high-quality silk screen
technology on your blank media that we use on our profes-
sionally replicated discs. Call 1-888-800-4041, or go
to www.discmakers.com/silkscreen for details and pricing.
HAVE A CD OR DVD PROJECT THAT’STOOBIG
FOR DUPLICATION?
With our state-of-the-art replication and printing facilities, no order is too small
or too large. Our turnkey packages make shopping for the right CD-ROM or DVD
package a snap. We offer hard-to-find packaging options in small or large quan-
tities, or we’ll create a custom package to fit your needs. And fast turn times
are our specialty. Many of our complete CD-ROM packages are ready in just 7
working days! No one does it faster. Call your Disc Makers product specialist at
1-800-237-6666, or go to www.discmakers.com/rom for complete information
and package pricing.
1-888-800-4041 www.discmakers.com T
03
Services

1-888-800-4041 www.discmakers.com T
04
Contents
TABLE OF CONTENTS
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Modes and Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Copy and Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Test and Verify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Compare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Prescan, Disc Info, and Select Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Images and Handling Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Edit Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
CD Compilations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setup and Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

The ReflexMax is a high performance CD-R disc duplicator designed for both
the novice and professional user. It is designed for a variety of applications
that require the exchange of audio, video or data content. The following is a
User Guide that outlines the menu commands of the unit and immediate func-
tions of the unit. For additional technical support please call 1-888-800-4041.
GETTING STARTED
Carefully remove the ReflexMax duplicator from its shipping container. Please
inspect the contents and verify them against the packing slip. Be sure to report
any errors in shipping immediately to Disc Makers.
Packing materials: Please save the original box and packaging in the event the
unit requires future service or you need to move the unit from one location to
another. This will help reduce the possibility of damage in transit.
Please Note: Any item that needs to be returned for a warranty repair must be
returned in original packaging. (See Page 2.)
INSTALLATION AND SETUP
1. Unpack the ReflexMax and place in a clean and cool work area. Keep the
external packaging for future storage and transportation.
2. Place the ReflexMax on a flat, clean, and dust-free surface.
3. Connect the power cord from the back of the unit to an electrical outlet. Do
not bypass the Ground.
4. The front panel should appear as below.
MODES AND COPYING
MODES
The ReflexMax is able to duplicate in two different modes: Hard-Drive-to-Disc
and disc to disc. The unit is factory preset to Hard-Drive-to-Disc. This mode is
efficient for duplicating large numbers of discs. The Hard-Drive-to-Disc copies
the master to the hard drive and then copies the data to each of the drives. This
ensures an exact copy of the original master to every disc.
The Disc-to-Disc mode will copy whatever is in the source Src drive to blank
media in the other drives in the unit. This mode is most effective for making
quantities of discs less than the number of drives in the unit. For the
ReflexMax4, if the need is for three discs or less, use the Disc-to-Disc mode.
For the ReflexMax7, if the need is for six discs or less, use the Disc-to-Disc
mode.
Only slight changes will occur in the functions of the unit when the different
modes are chosen. When the unit is in the Hard Drive-to-Disc mode P: A will
appear at the right side of the first line of the LCD. Pindicates the master disc
will be written to the hard drive, and the next letter indicates which partition
the file will be written to.
HARD-DRIVE-TO-DISC COPYING
Upon powering up the ReflexMax, the following should be displayed on the LCD
screen:
1-888-800-4041 www.discmakers.com T
05
Setup
1. Copy P:A

1. Copy the master to the hard drive by using the Image function. Press the
Down arrow until you see 9. Image then press the ENT button. You should
see the following displayed on the LCD screen:
2. Load the top drive with the master disc and press the ENT button. The mas-
ter disc will be copied to the hard drive and the display will read Image Load
OK
3. Press the ESC key two times until 9. Image appears on the LCD display. Then
use the Up arrow to return to 1. Copy.
4. Load the drives with high-quality optical media and press the ENT button.
The duplication process will begin, and when completed, the ReflexMax will
eject the successfully copied discs. When the copy is complete the LCD will
read:
Appearing next to OK will be the number of successfully copied discs. In the
this example, 4 discs were successfully copied.
DISC-TO-DISC COPYING
The ReflexMax is factory preset to do Hard-Drive-to-Disc copying. The unit can
be changed to Disc-to-Disc mode relatively easily.
1. From the 1. Copy screen, press the Down arrow until 8. Select Source
appears in the LCD screen.
2. Press the ENT button and the following display will appear:
3. Press the Down arrow once for Src: CD-RW Ø1 IDE1 Master press the ENT
key and the new source will be the top CD recorder drive. The LCD will display
CD-RW selected!
4. Press the Up arrow to return to 1. Copy, notice that P: A is no longer dis-
played on the screen. This is how you can determine if your unit is operating
in the Disc-to-Disc copy mode or the Hard-Drive-to-Disc mode. The Hard-
Drive-to-Disc mode will always show the P:.. at the right side of the screen
and what partition of the drive is being used.
5. To begin the duplication operation, load the top drive the Src drive with the
master disc. Load the other recorders—one or as many as needed—with
high-quality CD-R media.
6. Press the ENT button to begin duplicating. The unit will automatically ana-
lyze the master disc (this may take several moments), and begin duplicat-
ing at the maximum recording speed.
9. The LCD will show the progress and display OK when the duplication is com-
plete. Upon successful duplication, all copied discs will be ejected. If any disc
fails the duplication, it will remain in the bottom drive.
The LCD will display:
In this example three discs were successfully copied.
The same duplication job may be continued by reloading the recorder drives
1-888-800-4041 www.discmakers.com T
06
Modes
9-01. Image P:A
Load
1. Copy P:A
OK: 04
SRC: hard drive
00 IDE0 aster
1. Copy
OK: 03

and pressing ENT button.
To start a new job, place a new master disc in the top drive, the SRC drive.
Then load as many recorders with high-quality blank media as needed.
FUNCTIONS
1. COPY
The Copy function is the primary place to duplicate optical media.
In the Hard-Drive-to-Disc mode (the default setting), the LCD will display:
The copy is being made from the hard drive and specifically from Partition A.
In the Disc-to-Disc mode the LCD will display:
Notice there will be nothing to the right of 1. Copy.
Pressing the ENT button will initiate a copy operation.
2. TEST
The Test function is used to check whether a disc will successfully copy. It sim-
ulates the copying process. When concluded no data will be written to the
writer drives. This function operates in both Hard-Drive-to-Disc and Disc-to-
Disc mode.
1. Select the Test function using the Up and Down arrows.
2. In the Hard-Drive-to-Disc mode: load the drives with high quality blank CD-R
media and press the ENT button to start the process. The unit will ana-
lyze the master on the hard drive, and then any disc in the recorder
drives. A message will be displayed regarding the results.
3. In the Disc-to-Disc mode: Load the top drive Src with the master disc and
load the recorder drives with high quality blank CD-R media. Press the ENT
button to start the process. The unit will analyze the master on the Src drive,
and then any disc in the recorder drives. A message will be displayed regard-
ing the results.
Upon successful testing, the following will display on the LCD. In this exam-
ple three discs were successfully tested. Any disc that passed the test will
automatically be ejected from the drives.
If the target blank disc has already been written to, or is damaged and can-
not be written to, the disc will not be ejected. If the data on the master CD will
not fit on the target blank disc then the disc will not be ejected.
3. TEST AND COPY
The Test and Copy function incorporates the first two functions into one opera-
tion. It is used to check whether a disc will successfully copy and then goes on
to do the copy. First, the copy process is simulated and then the data is actual-
ly copied to the blank media.
1. Select the Test and Copy function using the Up and Down arrows.
2. In the Hard-Drive-to-Disc mode: load the drives with high quality blank CD-R
media and press the ENT button to start the process. The unit will analyze
the master on the hard drive, and then any disc in the recorder drives. The
LCD will display the process number of discs that passed the test and then
proceed directly to the copy.
3. In the Disc-to-Disc mode: Load the top drive Src with the master disc and
1-888-800-4041 www.discmakers.com T
07
Functoins
1. Copy P:A
1. Copy
2. Test
OK: 03

load the recorder drives with high quality blank CD-R media. Press the ENT
button to start the process. The unit will analyze the master on the Src drive,
and then any disc in the recorder drives.The LCD will display the number of
discs that passed the test and then proceed directly to the copy process.
Upon doing a successful Test and Copy the following will display on the LCD.
In this example, two discs were successfully tested and copied.
If the target blank CD-R has already been written to, or is damaged and can-
not be written to, the drive for this disc will not open. Likewise, if the data on
the master CD will not fit on the blank target CD, the drive will remain closed.
4. VERIFY
The Verify function is used to confirm that the master and the copy read the
same. Again this function operates similarly in both the Hard-Drive-to-Disc
and the Disc-to-Disc mode
1. Select the Verify function using the Up and Down arrows.
2. In the Hard-Drive-to-Disc mode: load the drives with the copied discs. The
unit will analyze the master on the hard drive, and then compare that to any
disc loaded in the recorder drives. The LCD will display the number of discs
that verified correctly and the number that failed the verification. Those that
verified correctly will be ejected from the recorders. All failures will remain in
the drives.
3. In the Disc-to-Disc mode: Load the top drive Src with the master disc and
load the recorder drives with the previously written media. Press the ENT
button to start the process. The unit will analyze the master in the Src drive,
and then any disc in the recorder drives.The LCD will display the number of
discs that verified and the number that failed. Those that verified correctly
will be ejected from the recorders. All failures will remain in the drives.
In the example above, three discs verified correctly and one disc failed the
verification.
The F-> indicates that by pressing the ENT button the failed disc(s) will be
ejected from the recorders. Please be careful to remove the correctly verified
disc(s) before pressing ENT again.
To verify more duplicated discs, simply fill the recorders and press ENT,
again.
5. COMPARE
The Compare function takes the Verify function one step farther, it gives
details about the master and copied disc. It also ejects the disc upon a suc-
cessful comparison.
1. Select the Compare function using the Up and Down arrows.
2. In the Hard-Drive-to-Disc mode: load the drives with the copied discs. The
unit will analyze the master on the hard drive, and then compare that to any
disc loaded in the recorder drives. The LCD will display the number of discs
that compared correctly and the number that failed. Those that passed the
comparison will be ejected from the recorders. All failures will remain in the
drives.
3. In the Disc-to-Disc mode: Load the top drive Src with the master disc and
load the recorder drives with the previously written media. Press the ENT
button to start the process. The unit will analyze the master on the Src drive,
and then any disc in the recorder drives. The LCD will display the number of
discs that compared correctly and the number that failed. Those that passed
the comparison will be ejected from the recorders. All failures will remain in
the drives.
08
Functoins
1-800-237-6666 www.discmakers.com T
3. Test and Copy
OK: 02
4. Verify F->
OK: 03 Fail: 01

Upon completion of this test the following will display on the LCD.
In this example, three discs compared successfully and one was different.
The successful disc will be ejected.
Pressing the ENT button will identify the source for the comparison and the
size of the source in MB. Pressing ENT again will display the first (topmost
recorder) drive and the condition of the comparison, Identical is any passed
disc. Pressing the ENT button will cycle through all the recorder drives and
report the condition.
Press the ESC key to return to the main menu.
The failed conditions are: TOC not match, Cannot read TOC, or Read disc
error.
6. PRESCAN
The Prescan function only looks at the master CD. If the ReflexMax is in Hard-
Drive-to-Disc mode, the data in the partition is examined. If the Disc-to-Disc
mode is current, any disc in the source Src drive will be examined. This is used
to verify that the master can be read correctly without errors
In the Hard-Drive-to-Disc mode: Select the loaded master to analyze and press
the ENT button. The unit will analyze the master on the hard drive and a mes-
sage will be displayed Prescan OK!
In the Disc-to-Disc mode: Load the top drive Src with the master disc. Press
the ENT button to start the process. The unit will analyze the master on the Src
drive, and then a message will be displayed regarding the results.
7. D ISC INFO
The Disc Info function only looks at the master CD. To use this function, it is
necessary to change to the Disc-to-Disc mode. See Step 8 Select Source. It will
display the session and tracks on the CD, total time of the CD, and size of
the CD.
1. Select the Disc Info function using the Up and Down arrows.
2. Load the Src drive with the master disc.
3. Press the ENT button to start the process. Pressing the Up and Down arrow
will scan through the information.
8. SELECT SOURCE
The Select Source function is used to select the mode the ReflexMax will oper-
ate under. When the Hard Drive is chosen as the source Src the unit will be in
Hard-Drive-to-Disc mode. Choosing any recorder drive as the source Src will
cause the unit to copy in Disc-to-Disc mode.
1. Select the function using the Up and Down arrows.
2. Press the Up and Down arrow to cycle through the available sources.
Typically the sources are Src: hard drive ØØ IDEØ Master and Src: CD-RW
Ø1 IDE1 Slave. The CD-RW drives are numbered from Ø1 to Ø7 with the top
drive being Ø1 and the bottom drive being Ø7.
3. Press the ENT button to select the source in view on the LCD. The display will
say the source and ... selected!
4. Press the arrow keys to move to another function.
9. IMAGE
The Image function is used to manipulate images on the hard drive. There are
six sub functions that can be utilized.
9.01 Load: use this sub-function to load an image of the CD master onto the
hard drive
1. Press the Down arrow until you see 9. Image then press the ENT button, you
should see 9-01. Image P: A Load.
2. Load the top drive with the master disc and press the ENT button. The mas-
ter disc will copy to the hard drive and the display will read Image Load OK.
9.02 Delete Image: use this sub-function to delete an image from the hard
drive
1-888-800-4041 www.discmakers.com T
09
Functions
Compare OK:3
Fail:1 Diff:1

1. Press the Down arrow until you see 9. Image, then press the ENT button. You
should see 9-01. Image P: A Load. Press the Down arrow to display 9-02.
Image P: A Delete Image.
2. Press the ENT button and Delete Image in Partition A?Yes will display in
the LCD window. Pressing the ENT button will delete the image in the A parti-
tion. The message will display Partition : A Image is deleted Press the ESC
key to return to the Image Sub-Function Menu.
9.03 Image Info: use this sub-function to show the number of sessions and
tracks on the currently selected partition of the hard drive.
1. Press the Down arrow until you see 9. Image then press the ENT button you
should see 9-01. Image P: A Load. Press the Down arrow to display 9-03.
Image P: A Image info.
2. Press the ENT key and the number of sessions and tracks will be displayed,
pressing the Up and Down arrow will display total time of the image, total MB
of the image, and the tracks and the track size. Note: data tracks will not dis-
play and time length.
9.04 Compare Image: use this sub-function to compare the image to a CD in
the source recorder for the hard drive.
1. Press the Down arrow until you see 9. Image then press the ENT button, you
should see 9-01. Image P: A Load, press the Down arrow to display 9-04.
Image P: A Compare Image.
2. Load the top drive (source recorder for the hard drive) with the disc to be
compared and press the ENT button. When the process is finished the same
screens will be displayed as in the full function (5. Compare) but the disc
will not be ejected.
9.05 Select Image: use this sub-function to select which partition on the hard
drive will be used.
1. Press the Down arrow until you see 9. Image then press the ENT button you
should see 9-01. Image P: A Load. Press the down arrow to display 9-05.
Image P: A Select Image.
2. Press the ENT key and the LCD will display Select Working Partition - A.
Pressing the Up and Down arrows will cycle through the partitions on
the hard drive. At the desired partition press the ENT key and Set
Partition to ... will be displayed to confirm that the partition is selected.
The ReflexMax unit is equipped with an eighty GB hard drive. Each partition is
approximately 1 GB. The partitions are arranged alphabetically, A through Z,
AA through AZ, and BA through BW
9.06 Image Source Drive: use this sub-function to select which recorder is
used as the source reading a CD to the hard drive. The ReflexMax is defaulted to
use the top recorder drive in the unit.
1. Press the down arrow until you see 9. Image then press the ENT button you
should see 9-01. Image P: A Load. Press the down arrow to display 9-06.
Image P: A Image Src Drive.
2. Press the ENT key and the LCD will display Select Img Src: 01 IDE1 CD-RW
N. Pressing the Up and Down arrows will cycle through the recorder drive
from 01 at the top to 04 at the bottom, 07 on ReflexMax7. At the desired drive
press the ENT key and Load image from Drive ID - 0... will be displayed to
confirm the change in source recorder.
10. EDIT TRACK
The ReflexMax can be used to create custom compilation audio CDs. The Edit
Track function allows the user to take audio tracks from different CDs and com-
pile them to a single CD. This function is only available in the Disc-to-Disc
mode.
1. Set the ReflexMax to Disc-to-Disc mode (see page 9), then select the Edit
Track function using the Up and Down arrows.
2. Load the top drive Src with the master disc. Press the ENT button once to
see the main screen for this function, 10-01 Edit Track CD to CD Edit. Press
the ENT button again to display the following screen:
1-888-800-4041 www.discmakers.com T
10
Functions
Select Track:
1/31 2:41

3. Press the Up or Down arrow to change the track in view. To select a track to
copy to the blank disc press the ENT key, a + will appear next to the track in
view. In the following example track 3 is in view and is selected for copying.
More than one track can be chosen from a CD but they will be recorded to
the destination in the order in which they are on the original CD. To change
the order of play, copy each track individually.
4. After selecting a track (or tracks) to copy press the Up arrow until End
appears. In this example one track is selected and the time for this track is
2:41.
If four tracks were selected the screen would show 4 Trk and give the total
time for all four tracks.
5. Load the other recorders—one or as many as needed—with Disc Makers
Ultra CD-Rs.
6. Press the ENT button and the ReflexMax will ask if all the selections are
made for this CD. Use the Up or Down arrow to change between Yes and No.
Pressing ENT with No on the LCD will take the user back to Select Track.
Pressing ENT with Yes on the screen will start the copying of the track (or
tracks) to the target blank CD.
7. When the copying ends the unit will display Burn Complete! OK: 01.
Press the ENT button. The LCD will display Continue edit next Disc? NO.
To change to another CD, Load the top recorder drive Src with another mas-
ter disc, press the up arrow to change the No to Yes and press ENT. This will
take you to the screen from Step 3. Repeat steps 3 through 6 to add more
tracks on the compilation.
8. When there are no more tracks to write to the compilation leave the Continue
edit next Disc? NO set to No and press the ENT key again. The following
screen will appear:
Press ENT and the ReflexMax will close the CD. Once the CD is closed, no
additional tracks can be copied to the CD.
The LCD will display Close Complete OK: ... Fail: ... the number of discs
closed successfully will be next to OK and they will be ejected, any failures
will remain in the recorder drives.
The ReflexMax can compile to the hard drive as well, in Step 2 use the Down
arrow to to select 10-02. Edit Track CD to hard drive Edit and press ENT.
Steps 3 and 4 will be the same to select the tracks to copy. It is not neces-
sary to load any media. Step 6 will load the selected track(s) to the hard
drive. The last few steps will proceed as follows:
7. When the copying ends the unit will display Image load OK, pressing ENT will
display Continue edit next Disc? NO Leaving this set to No and pressing ENT
the screen will display Burn or Move to partition? Burn. Use the down arrow
to change the Burn to Move then press ENT. Select Partition A will be dis-
played. Use the down arrow to select a partition to copy to and press ENT.
You will see Moving to P: ... and then OK! to confirm the writing to the hard
1-888-800-4041 www.discmakers.com T
11
Functions
Select Track:
+3/31 3:18
TRACK IN VIEW
TOTALTRACKSONDISC
TIME OF TRACK 1
Select Track:
End 1 Trk 2:41
End edit disc
and burn? YES
Close all discs
session? YES

drive. Pressing ENT will return to the Edit Track main menu.
8. Press ESC to return to the main menu and use the up arrow to change to 8
Select Source. Change to the hard drive for the source (see page 9) and then
use the arrows to go to 9. Image, press ENT then use the down arrow to get
to 9-05 Select Image to select the partition (see page 9) of the hard drive
that the compilation was moved to. Go to 1.Copy and copy the CD from the
hard drive.
11. Setup
The Setup function allows the user to specify specific parameters for copying
CDs. There are 16 sub items. From the main menu screen pressing ENT will
show the sub heading. Pressing the Up and Down arrows allows the user to
move between the settings.
11.01 Language: allows the user to set English or Spanish as the display lan-
guage.
11.02 Burn Speed: allows the user to change the speed at which the unit burns
a CD. By pressing the ENT button the current setting will be displayed.
The user can then press the Up and Down arrows to change to the
desired speed. Pressing the ENT button will set the speed. Press ESC to
go back to the main menu.
11.03 Read Speed: allows the user to change the speed at which the unit reads
a master CD. By pressing the ENT button, the current setting will be dis-
played. The user can then press the Up and Down arrows to change to
the desired speed. Pressing the ENT button will set the speed. Press ESC
to go back to the main menu.
11.04 Auto Start Drive set to On will start a copy function as soon as blank
media is detected in the writer drive. The default setting is Off.
11.05 Startup Menu allows the user to have the ReflexMax start up to any of
the first seven options in the main menu. The default setting is Copy.
11.06 Auto Verify set to On will do a verify after every copy is made. The
default setting is Off.
11.07 Auto Compare set to On will do a comparison after every copy is made.
The default setting is Off.
11.08 Auto PreScan set to On’ will do a prescan on every CD placed in the read-
er drive. The default setting is Off.
11.09 Eject Disc allows the user to choose what will happen at the end of
function. The three choices are: Eject Good Only, Eject All Disc, and Do
Not Eject. The eject option is only available on the Copy, Test and Copy,
Verify, and Compare functions. The default setting is Eject Good Only.
11.10 Burn on the Fly allows the user to burn an image of the master to the
hard drive then to blank media. The difference between this and loading
an image is that with Burn On The Fly set to Off the image will be imme-
diately erased after the write to the blank media. Set to On the ReflexMax
will write directly from Disc-to-Disc without sending an image to the
hard drive first. With Burn On The Fly set to Off. Safe will appear in the
upper right of the LCD display. The default setting is On.
11.11 Burn Mode allows the user to choose Disc-at-Once or Track-at-Once for
the burn function. The default setting is DAO Disc-at-Once.
11.12 Button Sound set to On will cause any pressing of the control buttons to
make a sound. The default setting is On.
11.13 Device Info has information on the writer and reader drives.
11.14 System Info has information on the controller of the ReflexMax.
11.15 Quick Erase erases the TOC of CD-RW discs.
11.16 Full Erase erases all the data on a CD-RW disc.
1-888-800-4041 www.discmakers.com T
12
Functions