Discount Car Stereo IL-C5FM User manual

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
IL-C5FM
UNIVERSAL IOS LIGHTNING ADAPTER FOR C5FM RADIO

PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•Careless installation and operation can result in equipment damage.
Requirements:
C5 FM RADIO
Introduction
Thank you for choosing the IL-C5FM as your audio input solution. The IL-C5FM is
designed to provide the connecting link between your Apple IOS device and the
C5 radio. Using the supplied accessories, you will be able to connect, charge and
play all Apple IOS devices (Except Nano 7G) through the C5 radio FM band
The IL-C5FM; (unlike wireless FM transmitters) connects directly to the radio
antenna socket to provide high quality sound as you would expect from a
commercial FM radio station without having to switch between stations when
traveling through different areas. .
See Frequently Asked question at the end of this guide for more details.
Installation
The IL-C5FM is designed to install in line with the radio antenna connection
usually located on the back of the radio.
Radio removal required. ( Click links below for radio removal video)
https://www.youtube.com/watch?v=Gcrlufo1ctc
https://www.youtube.com/watch?v=WTbWYNJTSDs
1. Locate radio 20-pin plug, press black release tab to disconnect (See
Fig. 1)
Fig. 1
2. Connect 20-pin plug from step 1, to matting socket (white) on
installation harness (See Fig. 2).
Fig. 2
harness
3. Connect installation harness 20-pin black/gray plug (See Fig. 2) to
radio 20-pin socket vacated in step 1
4. Disconnect factory antenna plug from radio socket (See Fig. 3)
Fig. 3
5. Connect factory antenna plug (See Fig. 3) to included antenna socket
in Fig. 4 marked “TO ANTENNA”

Fig. 4
6. Connect included antenna plug in Fig. 4 marked “TO RADIO” to vacated
antenna socket on radio (in step 4). Ensure plug is fully seated.
7. By default, the modulator tuning frequency is set to 87.9MHz. If use
wished to switch to 88.3MHz; locate frequency switch (top left), insert
small screwdriver etc. to move switch to desired frequency (See Fig. 5)
Fig. 5
8. Secure module behind radio cavity and proceed to next step.
9. Make note of frequency selection from step 7 as this will be needed in
Bluetooth operation section below.
10. Connect lightning cable RCA’s to modulator inputs (See Fig. 6)
Fig. 6
11. Run/route lightning plug (See Fig. 7) to desired location on dashboard,
glove box, console etc. (within 4 ft. of radio). Use caution to not cut,
pinch or crimp the cable during this step.
Fig. 7
12. Secure lightning cable in a location away from heat, humidity, moving
parts, or sharp metal objects. Damage to lightning plug may occur if
subject to abuse.

Operation
1. Turn ignition and radio “ON”
2. Select radio FM Band
3. Tune radio to FM Frequency selected in step 7 above.
Tip: Now may be a good time to store selected frequency in one of the
radios memory preset buttons for easy recall.
4. Connect IOS device to lightning plug
5. Device should begin charging
6. Put audio device in play mode
7. Control/select track and playlist using device built-in controls (Factory
radio buttons are used to set playback level)
Warning: Playlist and Track selection is *NOT* possible from radio
buttons. Use audio devices built-in controls to access and control audio
files and selection
8. If correct operation is confirmed go ahead and reinstall radio
Frequently asked questions & troubleshooting
1. Does the IL-C5FM work in all C5 radios?
YES; works on all Bose and Non-Bose radios. (FM band).
2. How to I access music played from iPhone?
Turn radio to FM band and tune to either 87.9 or 88.3 MHz
For easier access we recommend storing the selected frequency to a radio
present button.
3. Do you offer a music streaming option for C5 without CD changer?
YES, See our A2D-C5FM
4. After connecting everything, playback is noisy/humming. Any ideas?
Ensure audio device volume is set to 90% or more.
5. What is the difference between this FM modulator and FM transmitter?
FM modulators connects directly to the C5 radio antenna socket (input) to
provide high quality FM sound as you would expect from a commercial
radio station. FM transmitters send its signal over the airwaves, picked up
by the antenna mast prone to interference depending on weather conditions,
topology, and landscape.
6. How good is the sound quality from this module?
Contrary to what you may have heard, the modulator included in this kit
sounds very good and far better than FM transmitters which are subject to
noise and interference.
7. It is possible to install the IL-C5FM at the 10-pin plug in trunk/hatch?
NO; the IL-C5FM installs at the radio (Radio removal required).
8. Can I control smart device from radio buttons?
NO; you must continue to use audio device built-in controls and radio
volume control button to set playback level.
9. Will radio mute when I receive or make a phone call on my
smartphone?
Yes. And music playback resumes after call ends.

Disclaimer
• This product has no affiliation with Porsche, Becker or Apple
• There are no warranties expressed or implied by purchase of this product
• We’re not liable for misuse of this product.
Email [e-mail]
© 1995-Jun-22 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.