displayit 1020A-01 User manual

20 Foot Ensemble Kit 1020A-01
Diagram of Frames
Hardware is labeled as seen in diagram below:
Foot push button holes
face forward
Foot push button holes
face backward
Foot push button holes
face backward
C5
1
23
4
5
6
7
8
9101112
13
14
15
16
Z04
Optional Monitor Mount
Attaches Here
Z04
Optional Monitor Mount
Attaches Here
C1
12
34
5
6
7
8
9101112
13
14
15
16
C1
12
34
5
6
7
8
9101112
13
14
15
16
Updated 1/4/2023

Ensemble Display
General Assembly Instructions
Updated 4/27/2017
Note: Assembly is the same for all shapes and sizes of Ensemble frames
displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343
1. Straighten and assemble all
bungeed poles.
2. Connect poles to corners.
(See diagram to on next page)
5. Zip up the bottom graphic. 6. Using the frame diagram, attach
corresponding feet to frames.
4. Lay frames down. Pull pillowcased
graphic over frame and zip closed.
3. If your kit includes a center or
horizontal support pole, insert it into
the corresponding holes.
2. Slide light onto clamp and
connect power cable.
1. Clamp light clamp on top bar.
Tip: Put lights on before standing the display up.
LED Lights