DNP DP-DS80D User manual

DNP
DIGITAL PHOTO PRINTER
DP-DS80D
Printer Driver Instruction Manual
For Windows 7,8
Janualy 5, 2015 Ver.1.01

Dai Nippon Printing Co.,Ltd.
●Safety precautions
Please read the User’s Manual for the printer carefully before use, and follow the instructions. Note that the
contents of directions for use and safety precautions correspond to the safety standards as of the time the User’s
Manual has been created.
●Remodeling
For product safety, do not remodel the DP-DS80D printers or the contents of the DP-DS80D printer drivers and
the CD.
●Copyright
Copyrights, trademarks or any other intellectual property rights whatsoever that pertain to documents, programs
or other items provided with this product, are ascribed to Dai Nippon Printing Co., Ltd., or the respective other
holders of rights. Except in cases permitted by applicable laws, these may not be duplicated or used without
consent from Dai Nippon Printing Co., Ltd.
Microsoft and Windows are registered trademarks of Microsoft Corporation valid in the USA and other
countries.
LEADTOOLS Copyright (C) 2008 LEAD Technologies, Inc.

Dai Nippon Printing Co.,Ltd.
Contents
Chapter 1Install ______________________________________1
1.1 Printer and Host computer Preparation ________________________________________ 2
1.2 Installing the Driver Package ________________________________________________ 2
1.3 Installing the Printer Driver _________________________________________________ 5
1.4 Installing a Driver for an Unspecified Device____________________________________ 9
Chapter 2Properties__________________________________12
2.1 Opening Printer Properties _________________________________________________ 12
2.2 Explanation of Print Setting Functions ________________________________________ 14
2.2.1 Layout _____________________________________________________________________________________ 14
2.2.2 Advanced Options ___________________________________________________________________________ 16
2.2.3 Paper/Quality _______________________________________________________________________________ 19
2.2.4 Option______________________________________________________________________________________ 19
2.2.5 Color Adjustment____________________________________________________________________________ 20
2.2.6 Printer Information__________________________________________________________________________ 21
2.3 Default Values for Various Settings ___________________________________________ 22
2.4 Color Management _______________________________________________________ 22
2.5 Image Size ______________________________________________________________ 23
2.6 Print Orientation _________________________________________________________ 24
2.7 Print Method ____________________________________________________________ 26
2.7.1 Multi-layout ________________________________________________________________________________ 26
2.7.2 Example of Multi-layout application use _______________________________________________________ 28
2.7.3 Duplex Printing _____________________________________________________________________________ 29
Chapter 3Updating the Driver __________________________32
Chapter 4Driver Removal _____________________________39

1
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
C
Ch ha ap pt te er r 1 1 I In ns st ta al ll l
Installation Flow
Installation is done in the following 3 steps.
Details of each step are shown in a subsequent page.
O
N
U
S
B
C
a
b
l
e
Insert the accessory CD into the disk drive
and install the driver package.
STEP 1 Prepare the printer and computer →”1.1 Printer and Host computer Preparation”
Do not connect the USB cable at this step.
STEP 2 Install the driver package →”1.2 Installing the Driver Package”
STEP 3 Install the printer driver →”1.3 Installing the Printer Driver”
Connect the USB cable, turn the printer power ON,
and install the printer driver.
After installation is complete, reboot the computer.

2
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
1
1. .1 1 P Pr ri in nt te er r a an nd d H Ho os st t c co om mp pu ut te er r P Pr re ep pa ar ra at ti io on n
Check that the power for the DP-DS80D printer is OFF.
Have a USB cable ready. But do not connect the printer to the computer with the USB cable at this point.
In order to install the driver, login with administrator right. The following explanations are given on the assumption of use with
administrator rights.
1
1. .2 2 I In ns st ta al ll li in ng g t th he e D Dr ri iv ve er r P Pa ac ck ka ag ge e
Insert the accessory CD into the disk drive.
Start Explorer, and click on the corresponding drive. (If the AutoPlay function is on, select “Open folder to view files –using
Windows Explorer”.)
In Windows 8 if the AutoPlay function is on, click on the message of “Tap to choose what happens with this disc.”, then select “Open
folder to view files File Explorer”.)
Select the following folders from the accessory CD. *Be sure to select the folder that matches your environment.
DP-DS80D =Windows7…Drive of CD:\Driver\DP-DS80D\English\7
Windows 8 …Drive of CD:\Driver\DP-DS80D\English\8
Fig 1.1 Driver Package Folder

3
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
In the selected folder, double click on the file “DriverInstall.CMD”. (Depending on your operating environment, the .CMD
extension may not be shown.)
The best Driver Package Installer for your operating system (32 or 64 bit) will automatically be selected.
Fig 1.2 Install File
If the User Account Control dialog appears, click on “Yes”.
Fig 1.3 User Account Control
When the “Welcome to the Device Driver Installation Wizard!” window appears, click on “Next>”.
Fig 1.4 Starting of Installation Wizard

4
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
If the Windows Security confirmation window appears, click on “Install this driver software anyway”.
Fig 1.5 Windows Security confirmation
In Windows 8, click on “Install”.
Fig 1.5.ii Windows Security confirmation (Windows 8)
This starts the Driver Package installation. Please wait until it is complete.
When the “Completing the Device Driver Installation Wizard” window appears, click on “Finish”.
Fig 1.6 Completion of the Installation Wizard
DP-DS80D

5
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
1
1. .3 3 I In ns st ta al ll li in ng g t th he e P Pr ri in nt te er r D Dr ri iv ve er r
Connect the printer to the computer with the USB cable, and turn the printer power ON.
The printer will be recognized, and the driver installation should begin.
* Please refer to the manual for the DP-DS80 printer for connection if needed.
When driver installation begins, the message “Installing device driver software” will appear above the task bar.
The message will not appear in Windows 8. Please turn to page 7.
Fig 1.7 Driver Installation message
By clicking on this message, the “Driver Software Installation” window will be opened, and the driver installation status will be
shown. Click on “Close” to close the window.
Fig 1.8 Driver Software Installation
* About “Skip obtaining driver software from Windows Update”
If the operating system setting is such that it will get the driver software from Windows Update, it will first search for the driver
through Windows Update, so it will take more time to complete the installation. If you skip getting the driver software through
Windows Update, the time to complete the installation will be decreased (Depending on the environment, it may take some time to
complete the installation).
Click on “Skip obtaining driver software from Windows Update” in the “Driver Software Installation” window.
Fig 1.9 Skip obtaining driver software from Window Update

6
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
When the confirmation window appears, click on “Yes”.
Fig 1.10 Skip getting the driver software from Windows Update
From a beginning of installation after a while, the message “Your device is ready to use” will appear above the task bar, and the
printer driver installation will be complete.
Fig 1.11 Driver Installation Complete message
By clicking on this message, the “Driver Software Installation” window will be opened, and “Your device is ready to use” will be
shown. Click on “Close” to close the window.
(If the “Driver Software Installation” window is shown from the start of installation, the message above will not be shown.)
Fig 1.12 Driver Software installation complete

7
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
Select “Start”, then “Control Panel”, and open the control panel.
In Windows 8, right click the Start screen, select right-under the "All apps" and select the control panel.
Click on “View devices and printers”in the control panel.
Fig 1.13 Control Panel
Check that the DP-DS80D is shown in the Devices and Printers window.
Note: In Windows 8, DP-DS80D icon does not appear if the printer is offline (if the printer with the power on is not connected).
Now, installation of the DP-DS80D printer driver is complete.
Fig 1.14 Devices and Printers window
After installation of the printer-driver is complete, be sure to reboot the computer.

8
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
If the DP-DS80D printer driver installation was unsuccessful, the message “Device driver software was not successfully installed”
will appear above the task bar.
Fig 1.15 Driver Not Installed message
By clicking on this message, the “Driver Software Installation” window will be opened, and the message “Device driver software
was not successfully installed” will appear. Click on the “Close” button.
(If the “Driver Software Installation” window is shown from the start of installation, the message above will not be shown.)
If the driver insallation was unsuccessful, refer to the next section “1.4 Installing a Driver for an Unspecified Device” and install the
printer driver.
Fig 1.16 If the Driver is not installed successfully

9
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
1
1. .4 4 I In ns st ta al ll li in ng g a a D Dr ri iv ve er r f fo or r a an n U Un ns sp pe ec ci if fi ie ed d D De ev vi ic ce e
Before installing the driver package, connect the printer (with power ON) to the computer, to create an ”Unspecified” device in the
“Devices and Printers” window. Using this method, the printer driver can be installed as follows.
Also, when a driver is not installed correctly but the "Unspecified" device is created by the method of connecting a printer after
installing the driver package of usual printer driver installation procedure, you can install the driver using the following method.
1. Installing the Driver Package
If the driver package has not been installed yet, follow the procedure shown in “1.2 Installing the Driver Package”.
When the driver package has been installed, installation of the printer driver for the Unspecified device may be completed
automatically.
2. Installing a driver for an Unspecified device
In the "Unspecified" device of the "Devices and Printers" window, do the right click of the "Photo Printer", and click on the
"Troubleshoot" from pull-down menu.
Fig 1.17 Photo Printer as an unspecified device

10
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
When the “Install a driver for this device” window appears, click on “Apply this fix”.
It will automatically search for the driver and installation is started.
Fig 1.18 Applying the Fix
When the driver has been installed, “Troubleshooting has completed” will appear. Click on “Close the troubleshooter” to end the
troubleshooting.
Fig 1.19 Completion of Troubleshooting

11
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
Check that the DP-DS80D is displayed in the “Devices and Printers” window.
Note: In Windows 8, DP-DS80D icon does not appear if the printer is offline (if the printer with the power on is not connected).
Now, the DP-DS80D Printer Driver installation is complete.
Fig 1.20 Devices and Printers
After installation of the printer-driver is complete, be sure to reboot the computer.

12
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
C
Ch ha ap pt te er r 2 2 P Pr ro op pe er rt ti ie es s
Various printer settings can be made using the DP-DS80D Driver properties. Before operation, be sure to have a good
understanding of the contents. Login by administrator authority is required for operation. Depending on application of the use,
operation from print setting of the application is necessary.
2
2. .1 1 O Op pe en ni in ng g P Pr ri in nt te er r P Pr ro op pe er rt ti ie es s
1. Click Start ⇒Control Panel ⇒open the control panel
In Windows 8, Right click on the Start screen => All apps => Control Panel => open the control panel
2. In the control panel, select View devices and printers ⇒open the Devices and Printers window

13
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
3. Right-click on the DP-DS80D icon, and from the pull-down menu select Printer properties ⇒open the Properties window
Note: In Windows 8, DP-DS80D icon does not appear if the printer is offline (if the printer with the power on is not connected).
4. The DP-DS80D Properties window will appear.

14
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
2
2. .2 2 E Ex xp pl la an na at ti io on n o of f P Pr ri in nt t S Se et tt ti in ng g F Fu un nc ct ti io on ns s
From the Properties window, by selecting Preferences you can make various print settings.
2.2.1 Layout
Orientation
Assign print orientation as vertical
or horizontal.
Duplex Printing
This designates whether the duplex printing is long-edge or short-edge orientation, or is Off.
If cut paper (tray) is selected in the Paper Supply Method tab in “2.2.3 Paper/Quality”,
long-edge/short-edge orientation duplex printing can be selected.
Long-edge Duplex printing is carried out on the long-edge orientation.
Short-edge Duplex printing is carried out on the short-edge orientation.
Print paper exit slot
Landscape
Portrait
Print paper exit slot
Print paper exit slot
For (8x10), (8x12)
Fig 2.2.1 Layout tab
Ex.) For (8x5), (8x6)
Output images of the original image
without rotation are shown at the right.
Original image
orientation
Output image depending on print direction
Portrait
Landscape
Print paper exit slot

15
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
Page Order
When printing multiple images in the application, you can set the order.
Ex.) Print order
Pages per Sheet
Prints the designated fractional size. In most situations, set “1”.
（When set to 1 except, please use by the print quality setting to 300x300dpi or 600x600dpi.）
Ex.) Fractional size
In order
Reverse
order
No.1
No.2
No.3
1 (Whole)
11
4 (Quarter-size)
9 (One-ninth size)
11

16
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
2.2.2 Advanced Options
By selecting [Advanced] in the Layout window, various settings can be made using Advanced Options.
Paper Size
You can designate the paper size. Please match the paper size to the media size with which the printer is equipped
With the DP-DS80D, the paper sizes that can be designated with the roll paper / cut paper (tray)
selection in “2.2.3 Paper/Quality” differ as shown in the table below.
○：Can be selected
Paper Size
Roll paper
Cut paper
(5x3.5)
○
(5x7)
○
(6x4)
○
(6x4)x2
○
(6x8)
○
(6x9)
○
(8x10)
○
○
(8x12)
○
○
(8x4)
○
○
(8x4)x2
○
○
(8x4)x3
○
○
(8x5)
○
○
(8x5)x2
○
○
(8x5)_(8x4)
○
(8x6)
○
○
(8x6)x2
○
○
(8x6)_(8x4)
○
(8x6)_(8x5)
○
(8x8)
○
○
(8x8)_(8x4)
○
A4Length
○
(8x10.50)
○
(8x10.75)
○
Fig 2.2.2.2 Advanced Options tab
Fig 2.2.2.1 Advanced Settings

17
Dai Nippon Printing Co.,Ltd
[DP-DS80D Printer Driver] Instruction Manual for Windows 7,8
Copy Count
You can designate the number of times an image will be printed.
Print Quality
You can designate the print quality. Please match the print quality to the printer settings.
Print Quality
Function
300 x 300dpi
Printing in the high-speed mode
300 x 600dpi
Printing in the high-quality mode
* If the application can not set an asymmetric aspect resolution, please set the 600x600dpi.
*When you execute the "Print Test Page" in printer properties in Windows 8, depending on the specifications
of the OS, is printed the aspect ratio of the printer mark is different.
600 x 600dpi
Printing in the high-quality mode (Printer driver converts to 300x600dpi data, and sends it to the printer.)
ICM Method
ICM Method
Function
ICM Disabled
2.2.4 Synchronous with “Color Management: None”in paper option.
ICM Handled by Host System
2.2.4 Synchronous with “Color Management: ICM”in paper option.
Performs color management with the driver.
ICM Handled by Printer
This is the same as setting “ICM Handled by Host System”.
ICM Intent
This designates the rendering method when using ICM. Always have the ICC profile for the DP-DS80D
set to “Picture”. Please do not use it at other settings.
Advanced Printing Features
Always have it set to “Enabled”. Please do not use it at other settings.
Pages per Sheet Layout
The layout direction of a picture is specified, when Pages per Sheet setting is multiple pages per sheet.
Border Synchronous with the border option in the paper option.
Overcoat Finish
The overcoat finish for the printed surface can be selected from the following two types.
Overcoat Finish
Function
Glossy
This finishes the print with a glossy surface.
Matte
This finishes the print with a matte (non-glossy) surface.
Change the printer of the version corresponding to Overcoat Finish and a non-corresponded version, and
when you use it by connecting it to the same USB port, when you change printers, reboot the computer.
Print Re-try
Depending on the version being used, “Disable”may be the only option
This sets up whether print data in a printer buffer when the error of a printer occurs is printed after error
recovery, or it does not print.
Print Re-try
Function
Disable
Printing data in a printer buffer is cleared in the case of a printer error.
After an error recovery, the cleared image data must be re-sent.
When using an application that has an error recovery function, select this option.
Enable
Printing data in a printer buffer is held in the case of a printer error.
After an error recovery, the print process resumes with the saved data.
However, if the power is turned OFF, the data will not be saved.
Change the printer of the version corresponding to Print Re-try and a non-corresponded version, and
when you use it by connecting it to the same USB port, when you change printers, reboot the computer.