Power supply
Permitted switch
bounce time
Required control
impulse duration
Control outputs
Load contacts
Rated current
Endurance at rated
load
Protection class
Polycarbonate
Terminals U-clamp terminal
-
ture -
* L and N must not be switched!
Guarantee
-
device is opened without authorisation.
Wiring diagram
auf / stopp
(up / stop)
Kontrolle / Vorrang auf
Kontrolle / Vorrang ab
(control / prirority down)
(control / prirority up)
ab / stopp
zentral / Gruppe auf
(central / group up)
(down / stop)
zentral / Gruppe ab
(central / group down)
A1 A3
RJSG 1
1.1 1.5
1.61.2
N
18 15 2.1
16
auf
zu
A5
2.2 A7
2.6
A2
2.3
A4
2.7
N
1.4
N
1.8
M
~
L
2.4
L
2.8
Installation and operating manual for
RJSG 1
General information
Control functions
A1/A3 static control inputs: priority control
-
mands to the other control inputs are saved; the most recently saved control com-
A2/A4 dynamic control inputs: individual control
Each set of blinds can be moved independently of the others into any desired position
A5/A7 dynamic control inputs: central control
devices are switched in parallel.
Important note
the most recent control command is executed. The load relay of the RJSG 1 has an
-
must always be observed.
Mounting
Guarantee
-
-
authorization.
Technical data
Power supply
L *
N * Neutral conductor N
-
tion
Control inputs
Priority up
Priority down
cable
Doepke
||
DE EN
