DogWatch BIGLEASH User manual

................................By
Owner’s Guide
®
...............................
™

At DogWatch, “It’s all a out your dog.”™Whether you own one of our BigLeash
Remote Trainers or one of our great Hidden Fence products, you can e assured
that you have purchased the most technologically advanced pet containment and
pet training products availa le.
Our extensive research and testing has resulted
in products that are safe for your pet while helping
you keep your pet safe.
Because of our commitment to excellence and value,
Consumer Digest has awarded our Hidden Fence
products with a “Best Buy” rating every year since 1998.
DogWatch®offers a full range of solutions for pet containment and training. Our
Hidden Fences contain your dog in your yard and can keep him out of areas that
are “off limits”, such as your garden or swimming pool. And our BigLeash Remote
Trainer is a safe, effective and pet-friendly way to help train your dog to respond to
your commands and eliminate undesira le ehaviors.
We also have indoor systems that work throughout your home to keep your dog off
couches and countertops, out of the trash, etc. — you name it.
To make sure that you get the most from your BigLeash Remote Trainer, please
follow the instructions outlined in this manual.
If you have any questions, please visit our we site at: www.dogwatch.com,
or call Customer Service at 1- 00-793-3436 M-F 9 am to5pm EST.
Thank You for Purchasing
BigLeash™
REMOTE TRAINER
®
The BigLeash.
Big esults Are Close At Hand.
t h e

1
Table Of Contents
Important Safeguards .........................................................................................2
Getting Started .....................................................................................................3
Charging the Transmitter and Receiver ................................................................3
Turning the Transmitter “On” and “Off” ................................................................3
Transmitter Features............................................................................................4
1. Lanyard Loop ..................................................................................................4
2. Antenna /Range Information ............................................................................4
3. LCD Display......................................................................................................5
4. Correction Level Adjustment ............................................................................6
5. Dog 1/Dog 2 Feature ........................................................................................6
6. Correction Button A [Audible/Vibration] ..............................................................6
7. Correction Button B [Brief] ................................................................................6
8. Correction Button C [Continuous] ......................................................................6
Switching from Audible to Vibration ..................................................................7
Using the Test Light to Check Correction Function ..........................................7
Receiver Features ................................................................................................
Adjusting the Receiver Collar ..............................................................................8
Setting the Contact Posts.................................................................................... 8
Using the Receiver Collar for Training ..................................................................8
General Training Considerations ........................................................................9
Training Basics ..................................................................................................11
Obedience Training ............................................................................................13
Behavior Training ..............................................................................................14
Barking ..............................................................................................................15
Digging ..............................................................................................................15
Jumping Up ......................................................................................................15
Jumping on Furniture ........................................................................................16
Chewing ............................................................................................................16
Chasing ..............................................................................................................16
Aggression ........................................................................................................16
Troubleshooting ................................................................................................17
Warranty & Repair ..............................................................................................1
Battery Replacement ........................................................................................19
Adding a Second Receiver Collar (Dog 2) ........................................................20

2
Important Safeguards
TO GET THE MOST FROM YOUR DOGWATCH®BIGLEASH™REMOTE
TRAINER,PLEASE FOLLOW THE PROCEDURES IN THIS MANUAL.
www.dogwatch.com www.bigleash.com
This Owner’s Guide applies to BigLeash Basic and BigLeash with Good Vibrations™.
The BigLeash™Remote Trainer is appropriate or training companion dogs,
ield trial training, and or hunting and sporting dogs.
■It is important to understand the training process before using the trainer.
■Be consistent with your dog. Inconsistent cues (verbal and non-verbal) will
confuse your dog. A confused dog will have difficulty figuring out what you
want him to learn.
■In the event your training product requires servicing please contact DogWatch
Customer Service at 1-800-793-3436 .
■Attempting to service the system yourself may invalidate the warranty.
■This product is recommended for dogs in good health who have no history of
agressive behavior.
■Keep the transmitter and receiver collar out of reach of children and others
unfamiliar with proper use of remote trainers.
■Periodically inspect your dog’s neck for irritation due to rubbing.
■The audible sound used for the BigLeash Remote Trainer is different than the
sound used for DogWatch Hidden Fences so your dog will not confuse the
trainer signal for the fence signal. The DogWatch Hidden Fence collar will not
work with the remote trainer and the trainer collar will not work with the fence.
■This product is intended for the purpose of training domestic dogs. Use for any
other purpose is at the owner’s risk.
■This product is not recommended for training aggressive dogs. Dog aggression
should be handled by a qualified dog training professional.
If you have questions about your BigLeash Remote Trainer
contact Customer Service at 1- 00-793-3436, Monday-Friday, 9 am-5 pm.
T
TH E H E S U C C E S S S U C C E S S O F O F ALL A L L TRAINING TRAINING R E Q U I R E S REQUIRES REPETITION REPETITION, ,
C O N S I S T E N C Y
CONSISTENCY, ,PAT I E N C E PAT I E N C E AND A N D A ALOT LOT O F O F P R A I S E P R A I S E . .

Charging the Transmitter and eceiver Collar
FULLY CHARGE THE TRANSMITTER AND THE RECEIVER COLLAR BEFORE USING THE FIRST TIME.
■Both the transmitter and receiver use a rechargeable lithium polymer battery.
We recommend recharging your batteries every night.
■To charge the transmitter and/or the receiver insert the
power adaptor plug securely into the charging port.
•It takes approximately 3-4 hours to charge a battery.
A protection circuit prevents overcharging.
•When the batteries are charging the battery icons
remain “on”. When charging is comple e, he ba ery
icons disappear.
■To check the battery status when the units are plugged-in align the
“on/off” markers (see below).
-If there are no battery icons, the batteries are charged.
- If one of the batteries is charging the battery icon will appear.
- If both batteries are charged the transmitter and the receiver will
turn “on” (low-to-high beep) when the “on/off” markers are aligned.
■A “Y” connector is included so the transmitter and the receiver can be
charged at the same time.
For battery replacement in ormation, see page 19.
Turning the Transmitter and eceiver “ON” and “OFF”
Both the transmitter and receiver must be turned “on” to operate.
■To turn the transmitter and receiver “on”or“off” hold he ransmi er and
receiver nex o one ano her so he alignmen markers (indicated below) on he
ransmi er ma ch he alignmen markers on he receiver.
■When the transmitter turns “on” you hear an audible low-to-hi “beep” tone
and the screen light turns-on for 5 seconds.
■Follow the same procedure to turn “off” the receiver and the transmitter. The
receiver will make a hi-to-low “beep” tone when turned off. Turning your
system “off” when not in use will help preserve the battery life.
If one of the batteries is not charged, neither of the units wi turn “on”.
3
Getting Started
ON/OFF
Alignment Markers
{
{
Alignment Markers
Alignment Markers
▲ ▲▲ ▲ ▲▲

Transmitter Features
5
3
1
2
Dog 1/Dog 2 Switch
9On/Off Alignment Markers
Lanyard Loop
Antenna
4Correction Level
Adjustment
LCD Display
6
7
4
The BigLeash™ Remote Trainer by DogWatch®is the only remote trainer with two-
way communication between the transmitter and the receiver collar.
Correction Button B (Brief)
Correction Button A
(Audible / Vibration*)
Correction Button C
(Continuous)
▲ ▲▲
Transmitter Features
1. Lanyard Loop
■A lanyard is supplied with each transmitter.
2. Antenna/ ange Information
■Your BigLeash Remote Trainer provides up to a ½ mile range in optimal
conditions. Range will vary depending on environmental conditions such
as terrain weather vegetation buildings and other obstructions.
■How you hold the transmitter may affect the range. For maximum range
keep the antenna pointed toward the sky. Poin ing he ransmi er an enna
oward your pe will reduce he range. (See illustration on next page.)
■Keep your fingers off the antenna. Touching the antenna during transmission
will greatly reduce the efficiency and the range of the antenna.
10 Charging Port
*Vibration not included in the
BigLeash Basic model.
Training Tip:
Keep the trainer out of direct vie of your pet hen using it so he does not become
“transmitter- ise.” It is important that he associates the correction ith his behavior,
not ith the transmitter.

1 - 3 = Mild Correction
4 - 6 = Moderate Correction
7-10 = Strong Correction
5
Correct Transmitter Position
Hold the transmitter away from your body
with the antenna up for maximum range.
■Correction Level
■Paw Icon indicates that the
receiver collar is ‘on’ and
functioning properly.
Paw blinks if signal is los
(dog out of range or collar
battery is depleted.)
■Transmitter Icon blinks to
indicate activation when
any button is pushed.
■Communication Link Line
indicates the status of the
signal between the collar
and the transmitter.
Solid = communicating
Blinks = correction signal
sent & received
Incorrect Transmitter Position
Pointing the transmitter antenna toward
your pet will reduce the signal range.
Top example = strong signal correction level 3 collar 1 and low batteries
Bottom example = weak signal correction level 9 collar 2 and good batteries.
A weak signal s ally indicates the dog is moving o t of range of the transmitter.
■The Battery Icon displays when
the battery needs to be charged.
Upper icon: collar battery.
Lower icon: transmitter battery.
■Dog 1/Dog 2 Icon indicates which
collar is receiving the signal when
working with 2 dogs.
Signal Strength is indicated by the horizontal
lines between the paw and the transmitter icons.
Battery Icons
•No icon = Charged battery
•Icon On = Low battery
•Icon Flashes =
Its time to re-charge
No Line + Blinking Paw
= Not Communicating
Correction Level 0 = Safety Mode
No Audible or Vibration / No Correction
Hold the transmitter with the antenna p. Do not point the antenna at the dog.
3. LCD Display
The LCD display on your transmitter lets you know your system is operating
properly. The LCD display illuminates for 5 seconds when the transmitter is
turned on or when one of the command buttons is pushed.

4. Correction Level Adjustment
■The correction levels can be adjusted up or
down from 0-10 by pressing the correction
level adjustment buttons.
■Start at level 1 and increase the intensity level until you notice a reaction from
your dog; a quick head shake looking down even flicking an ear. You must
be focused on your dog when doing this. When you see the reaction that is
the level to start training. The appropria e level varies from dog o dog.
✧We recommend using the lowest effective correction level. ✧
5. Dog 1 / Dog 2 Feature
Every BigLeash transmitter comes with two-dog capability. Your transmitter
comes set for use with one dog but can easily be programmed for two dogs.
■If you are working with two dogs you will need two receiver collars.
Information about setting the remote trainer to work with two dogs is
provided on page 20 and included with the purchase of the additional collar.
■The Dog 1 and Dog 2 buttons allow you to change commands between the
two collars. When working with 2 dogs (two collars) the transmitter keeps
separate settings for each collar. The settings change automatically when
you switch from Dog 1 to Dog 2.
■When working with 2 dogs the display on the LCD screen will indicate if the
transmitter is set to send the signal to the collar on Dog 1 or Dog 2.
6. Correction Button A [Audible / Vibration*]
■Pressing the ‘A’ button sends either an audible
warning (sound only) or a vibration warning to the
dog’s receiver collar. This warning signal continues as long as you press the
button (up to 8 seconds.)
*Vibration is not included in the BigLeash Basic model.
7. Correction Button B [Brief ]
■Pressing the ‘B’ button sends a brief correction (1 second) to the dog’s
receiver collar. Additional corrections may be sent after releasing the button.
8. Correction Button C [Continuous]
■Pressing the “C’ button sends a continuous correction as long as you
hold the button down. If the button is not released the correction will
automatically stop after 8 seconds. The collar will be ready to receive
another signal after the button is released.
6
Correction Buttons
Use the ▲and ▼buttons to
the right of the LCD screen
to adjust the correction level.
Brie
Brie
Audible &
Audible &
Vibration
Vibration
Continuou
Continuou s s
Remember: Level 0 = Sa ety Mode (no audible or vibration, no correction)

Using the Test Light to Check Correction Function
A test light is included with your BigLeash trainer. The test light is used to
confirm that the system is working properly.
■Turn both the transmitter and the receiver collar “on”.
■Hold the test light over the receiver with the contact posts
inserted into the test light as illustrated.
■With the test light placed over the contact posts press the
“B” or the “C” correction button on the transmitter. If the
system is functioning properly the light on the testing
device will turn on when you press the correction button.
-The higher the correction level the brighter the light.
-If the correction level is set too low the light may be
difficult to see.
-If the test light does not turn on check “Troubleshooting/Remote Trainer
Does Not Seem To Be Working” on page 17.
7
When a correction b tton is p shed, the comm nication link line
and transmitter icon on the LCD screen will blink briefly to confirm
the signal has been sent and received.
Note: The Vibration eature is not available in the BigLeash Basic model.
In BigLeash models that include Good Vibrations™you have the option of using
the “A” Correction Button for either an Audible signal or a Vibration signal. The
mode you select will depend on your dog and your personal preference.
When working with 2 dogs, the two collars are set independently.
To switch between Audible and Vibration:
■Set the correction level to “0”.
■Hold the “A” correction button for 5 seconds. Holding the “A” correction
button with the correction level at “0” allows you to toggle between Audible
mode and Vibration mode. Hold the “A” button until the new mode is
indicated on the LCD Display.
➜When switching to Audible the LCD will briefly display an “A” to indicate
that the “A” button is now set to Audible.
➜When switching to Vibration the LCD will briefly display a “V” (with a flat
bottom) to indicate that the “A” button is now set to Vibration.
■To test the setting return the transmitter to the appropriate correction level
(1-10) and press the “A” button.
■The “A” button will remain set to either Audible mode or Vibration mode until
you change it. Collar 1 and Collar 2 are set and changed separately.
Switching from Audible Mode to Vibration Mode

eceiver Features
The BigLeash collar is waterproof for all-weather, year-ro nd se.
■Adjusting the Receiver Collar
Proper collar fit is important for successful training.
•Tighten the buckle so the stainless steel contact posts fit snuggly against
your dog’s neck. Cut the collar to the appropriate length for proper fit.
•The collar should be snug but not so tight that it is uncomfortable or will
damage the dog’s skin or restrict movement of the dog’s head or neck.
•If the collar is too loose your dog may not respond to the correction. Also
too loose a fit can cause the collar to move on the dog’s neck and can
cause irritation.
■Setting the Contact Posts
•The receiver comes with two sets of contact posts. The contact posts on
the receiver will work for most dogs. The extra set is sized for dogs with
thick coats.
•The correct fit depends on the dog’s size neck shape coat and skin
sensitivity. The posts must make contact with the skin in order for the dog
to feel the correction.
•In certain cases you may need to trim some of the hair around the contact
posts in order for the posts to make contact with the skin.
■Using the Receiver Collar for Training
•It is important that your dog does not become “collar wise” (i.e. learns to
associate the collar with receiving corrections.) See page 10 for
suggestions
•The receiver collar is not designed to be worn for extended periods. We
recommend removing the collar at night. (This is a good time to re-charge
the batteries.) Removing the collar when not in use will help prevent
irritation of the dog’s skin.
8
eceiver Features
The BigLeash™ Receiver is attached to a dog collar and receives the commands
rom the handheld transmitter.
The BigLeash Receiver Collar Contact Posts and charging port on the
back of The BigLeash Receiver Collar

9
General Training Considerations
Understanding the Purpose of Training
Training is a method o changing your dog’s behavior. I used properly, your
BigLeash Remote Trainer will help you train your dog more e ectively.
Your remote trainer can be used to train your dog in two ways:
1. To reinforce appropriate behaviors such as “Come” “Sit” and “Stay.”
2. To eliminate inappropriate behaviors such as jumping digging and excessive
barking.
Understanding Your Dog’s esponse To Stimulation
•Stimulation (the correction from the dog’s collar) has been a safe and effective
part of dog training for over forty years. All dogs respond differently when they
feel a mild stimulation. Some dogs may demonstrate little if any reaction while
others may yelp or jump back. Some dogs “freeze”.
•It is important to remember that your dog will not automatically understand what
to do when he receives a correction from the remote trainer. For raining o be
effec ive, you mus unders and how o use he remo e rainer appropria ely.
•Set the Training Level just to the point of mild discomfort (like a quick tug on a
leash) to get the dogs attention without creating anxiety. Anxiety will make it
more difficult for him to learn. See page 6 Correction Level Adjustment.
✧We recommend using the lowest effective correction level. ✧
Do not try to com ort your dog i he receives a correction.
It will create uncertainty or con usion about the training message.
Dog Personalities and Traits
•Keep in mind that dog personalities and traits differ among and within breeds.
It is important to understand your dog’s unique personality.
•A gregarious dog or a dog who is easily distracted may take longer to train.
Understanding your dog will make the training easier for both of you!
Creating The ight Environment
Attitude and Consistency are Important!
1. Keep the training “light”. Use lots of praise. Keep the dog’s spirits high.
2. Use high happy tones for praise. Use low tones for negative commands. Use
calm soothing tones to keep eager energetic dogs focused; and enthusiastic
praise to keep quiet dogs engaged in the activity.
3. In the early stages limit specific training sessions to 15-20 minutes. Include
periods of free play and praise to keep your dog enthusiastic and happy.

10
Getting the Most From Your BigLeash™emote Trainer
■Appropriate and Proper Use
As with any training program appropriate and proper use of the training
tools is directly related to the success of the training.
•The remote trainer is not a short cut or a “punishment” tool. It should
be used to train your dog to avoid unwanted behavior and to reinforce the
training not as a way to punish him for bad behavior.
•Keep your training sessions short especially early in the training. As your
dog learns he will respond more quickly and training sessions may be
extended.
•The use of a voice command in conjunction with the remote trainer will vary
with the situation and your training goal. See examples of some specific
behaviors and suggested training techniques in the next section.
•Always begin with a low intensity level until you determine the
appropriate level for your dog.
•In the early stages of training most dogs respond to the first or second
brief correction (correction button ‘B’). Some dogs may need a few more
brief corrections (or a higher intensity level) depending on the dog’s
personality and level of excitement or distraction.
•For some behaviors - such as chasing or barking - a continuous correction
(correction button ‘C’) of several seconds may initially be needed.
•The goal is for your dog to understand that he can avoid the stimulation by
responding appropriately .
•Do not let your pet know that it is you giving him the correction. Do not
make it obvious you are using the transmitter as part of the correction
process.
■Keeping Your Dog From Becoming “Collar-Wise”
•Do not let your dog become “collar-wise”. Have your dog wear the
BigLeash collar for a few days before you begin training so your dog will
not learn to associate the collar with training corrections.
•When you begin training have your dog wear the collar for a sufficient
period before and af er the training session so that he does not associate
the collar with the training corrections.
•Have your dog continue to wear the collar whenever you work with him for
at least a month even after he seems to be trained. It is good to have the
collar on the dog in case he needs an occasional reminder.

11
■Consistency and Timing
•Consistency is critical for successful training.
•Timing of the correction is also critical. The correction must occur at the
time of the behavior. If the behavior is not occurring when the correction
occurs the dog will not associate the correction with the behavior.
If you want your dog to stop digging in the yard the correction must occur
while he dog is digging . . . not later when you find the hole.
Before Using the emote Trainer
Be ore you begin a behavior training program using your BigLeash™ Remote
Trainer, your dog must know the basic obedience commands.
■The “Heel” Command
The ‘heel’ command is the first command to teach your dog.
•With your dog on a short leash at your side begin walking while gently
pulling on the leash to keep your dog positioned at your side as you walk.
•Say the command ‘heel’ each time you use the leash to keep your dog in
position at your side.
•Praise your dog when he returns to the correct position after you say the
‘heel’ command.
•With repetition consistency patience and praise your dog should be
walking next to you in just a few short training sessions.
■The “Sit/Stay” Command
The second leash training command is ‘sit/stay’. ‘Sit’ is the command; ‘stay’
is the implied.
•Begin the ‘sit/stay’ training by walking on lead in the ‘heel’ position. Come
to a stop and tell the dog to ‘sit’. Initially you may need to put pressure on
your dog’s rear end to teach him the sit position. Reward with praise when
he ‘sits’.
•With the dog in the ‘sit’ position move away to the end of the leash. When
you tell your dog to ‘sit’ he should ‘stay’ until you give him a different
command. When the dog sits and stays return to the dog to reward with
praise.
•To release your dog from the ‘sit’ position give a gentle tug on the leash
and command the dog to ‘come’.
•As with all training use repetition consistency patience and praise.
Training Basics

Preparing to Use the emote Trainer
■Fitting the Receiver Collar
•Before you begin training be sure the receiver collar fits properly.
•The collar should be worn snugly on your dog’s neck.
This is extremely important! If the collar is too loose
your dog will not receive the signal.
■Picking the Right Correction Level
•Your BigLeash trainer provides 10 levels of correction so you can
customize your remote trainer for your dog’s temperament and the type
of training you do.
•Start with the lowest level. Before you begin training test the dog’s
response at Level 1. Use the Brief (B) correction button and watch the dog’s
response. If your dog’s response is similar to that of a quick tug on his leash
you are at a good starting point. If your dog does not respond at Level 1
increase the correction one level and test his response. Continue until your
dog can just feel the stimulation (like a quick tug on a leash.)
•You may need to adjust the correction level during training as the dog’s
response may change with excitement or distraction.
■Understanding the Types of Training Corrections
Your BigLeash trainer allows you to adjust the type the duration and
the level of the training correction.
•The “A” button provides either an audible or a vibration warning. In many
training situations it is recommended that he correc ion be preceded by a
shor audible or vibra ion warning. Your pet will learn to avoid a correction by
responding to the audible or vibration warning.
See page 7 for instructions to switch from audible to vibration mode.
(Note: vibration option not available in the BigLeash Basic model.)
•The “B” button provides a brief 1 second correction (regardless of how
long you hold the button down.) Press the “B” button repeatedly for a series
of brief corrections.
•The “C” button provides a continuous correction (up to 8 seconds.) This
allows you to control the duration of the correction when the situation calls
for a longer correction.
You should be able to place no more than your thumb
bet een the contact posts and the dog’s neck.
When checking snugness of collar, the dog’s neck
should be facing do n(sniffing position) as this
position is here the dog’s neck is the smallest.
12

13
Obedience Training
Obedience Training Basics
■Plan Your Training for Success
•Make sure your dog understands basic commands such as “come” “sit”
and “stay”. If he understands the command but does not always obey the
remote trainer can be used to reinforce the appropriate response to the
command (i.e. if he responds appropriately he turns-off or avoids the
correction.) If he does not have a basic understanding of the command
the remote trainer will not be effective.
•Set the Training Level to the lowest effective level to get your dog’s
attention without making him anxious when you send a correction.
•Begin your training sessions in an open area free from distractions. If the
area is not fenced to contain the dog use a long rope to keep the dog from
leaving the area until you are sure he is consistently responding to your
commands.
•Do no make i obvious ha you are con rolling he correc ions. You wan
your dog o associa e his behavior wi h he correc ion - - no you or he
remo e rainer!
•Do not comfort your dog when he receives a correction.
•Keep the initial training sessions short (15 - 20 minutes) but repeat the
training regularly and frequently, especially during the early stages. Dogs
learn by repetition and reinforcement.
•Reward your dog during training sessions with praise and periods of play.
•Be consistent. Always use the same commands.
•When your dog has learned the commands in the first setting gradually
increase the level of distractions and continue the training in different
settings. Increase the distractions gradually so your dog continues to
associate the correction with the behavior not the distractions.
■Using the Remote Trainer
•For Obedience Training use the Continuous stimulation (button ‘C’). Begin
the stimulation at the same time you give the command. Do no wai un il
af er you give he command as the dog may already be trying to comply by
the time you press the button.
•As your dog begins to understand that he s imula ion s ops when he
responds o he command he will begin to respond more quickly. As he
responds more quickly the duration of the stimulation should shorten also.
•When he is responding almost immediately to your command begin using
the trainer only if you must repeat the command.

14
Behavior Training
A ter your dog understands the basic obedience commands, you are ready to
begin more speci ic behavior training with your BigLeash™ Remote Trainer. All o
the general and obedience training basics also apply to behavior training.
Behavior Training Basics
■The Basics of General “Avoidance” Behavior Training
•When correcting your dog’s behavior you must take into consideration that
not all activities such as barking should be eliminated completely. The
goal of your training should be to control problem behavior rather than to
eliminate normal and acceptable aspects of the same behavior.
•Remember that your dog will not automatically understand what to do
when he receives a correction from the remote trainer. For raining o be
effec ive, you mus use he remo e rainer appropria ely.
•Some dogs will learn quickly even with a very low correction level; others
may need higher levels to get their full attention. For most dogs and most
behaviors we recommend beginning with a low level before trying
incrementally higher levels.
✧We recommend using the lowest effective correction level. ✧
•“Avoidance training” is teaching your dog to associate the correction with
the problem behavior and helping him learn that in order to avoid the
correction he must stop the behavior.
•It is best to minimize your association with giving the correction. Do not
make it obvious that the transmitter is associated with the correction.
•The use of verbal commands and/or audible/vibration alerts varies with the
training situation and the training method. In some training situations you
may want your dog to associate the behavior only with the correction with
no verbal command or audible/vibration warning. In other situations a
verbal command and/or audible/vibation warning may be appropriate.
•Do not praise or comfort your dog after giving him a correction.
•Consistency and the timing of the correction are both very important.
Field Trial Training and Hunting/Sporting Dogs
The BigLeash™ Remote Trainer is appropriate for Field Trial Training and hunting/
sporting dogs as well as companion pets. This Owner’s Guide provides only
general training examples for common behaviors. There are many books and
online guides which cover topics more specific to Field Trial Training and
hunting/sporting dog training. Advice and assistance from a professional dog
trainer familiar with remote trainers may also be helpful.

15
Examples of Specific Behaviors
Training Methods
There are several training approaches used by professional dog trainers. When
using a remote trainer some trainers advocate preceeding the correction with a
voice command and/or audible/vibration warning; others believe that some
behaviors are eliminated more effectively if there is no preceeding verbal
command or audible/vibration warning.
Whichever training approach you use the key is to be consistent. The following
examples offer general approaches for using the remote trainer to address
specific behaviors. Any of the suggested corrections may be preceeded with a
verbal command (such as “No”) and/or an audible/vibration warning depending
on the behavior your training goal and preferred approach.
•Barking is a natural part of dog behavior and dogs should be allowed to
bark as a normal part of what they do. Use the BigLeash trainer only to
correct barking that is excessive or overly aggressive. It is important to be
consistent when correcting your dog’s barking.
•Use a “quiet” or “no barking” command backed up with a correction from
your remote trainer.
•Dogs dig for many reasons; they may be looking for a cool place to lie
down or they may just be bored.
•To train your dog that digging in certain areas is not acceptable apply a
correction the moment he starts to dig.
•Dogs generally jump up to get attention. To correct jumping all members
of the family and all guests need to be consistent when training.
•When your dog wants to jump up instruct him to sit instead and then give
him the praise and attention he is looking for.
•If the Trainer is needed to correct jumping up on people press the Brief (B)
correction button whenever he jumps up. Do not praise the dog when he
gets off.
•Use the same approach to correct jumping up to steal food from the
counter or the table. If your dog usually does this when you are not in the
room you may need to leave food on the counter or the table then go
where you can observe the dog but he cannot see you.
Digging
Jumping Up
Barking

16
•You can train your dog to stay off of ALL furniture; or you can limit your
training to specific furniture. Regardless it is crucial that you are
consistent. Any furni ure ha is ‘off limi s’ should ALWAYS be ‘off limi s.’
•Timing is important. Apply a correction the moment your dog starts to
climb on the furniture.
•Your dog should associate the act of jumping on the furniture with the
correction so he will avoid the selected furniture in the future.
•You can also conditionally train your dog that jumping on furniture
uninvi ed results in a negative response (a correction) while responding to
your invitation will be rewarded with praise. Use a lower correction level for
conditional training than you would for “off limits” training.
•Chewing is a natural behavior for dogs. As with barking acceptable and
unacceptable chewing must be defined so that training corrections can be
applied consistently.
•Teach your dog that there are things he is allowed to chew (special chew
toys bones etc.) and things he should not chew (shoes socks garden
hoses etc.) As soon as your dog begins to chew something that he
shouldn’t apply a correction.
•The most common chasing behavior is chasing cars.
•Care must be taken when teaching your dog not to chase cars. Be sure
that when you apply a correction your dog is away from the moving
vehicle.
•Generally dogs are excited and distracted when they are chasing
something and use of the Continuous correction [C button] may be
necessary especially in the early stages of training.
•Dogs chase and engage in aggressive behaviors (such as biting and
fighting) for a variety of reasons that differ from one dog to another.
For training aggressive dogs, we recommend that you consult a
professional trainer or animal behaviorist who has experience
working with aggressive dogs.
Chewing
Jumping on Furniture
Chasing
Aggression

17
Troubleshooting
■The Remote Trainer Does Not Seem To Be Working
•Check to see that both the transmitter and receiver are turned “on”.
•Check to make sure the batteries in both the transmitter and the
receiver are charged.
■Dog Does Not Seem To Respond
•Check to see that the collar is snug and that the ends of the contact posts
are touching your dog’s neck.
•Check the correction level. If the correction level is set to “0” (safety mode)
no signal will be sent to the receiver. If it is on a low setting try increasing
the correction level (gradually). See Correction Level Adjustment
instructions on page 6.
•If your transmitter is programmed for use with 2 dogs check to see that
your transmitter is set to the correct collar.
■The Battery Does Not Seem To Charge
•Be sure the charging plugs are fully and securely inserted. See page 3 for
Battery Charging instructions.
•Make sure you are using the battery charger provided with the trainer.
•If the battery does not hold a charge as long as it used to it may be time to
replace the battery. If the battery is less than two years old check with
Customer Service for other troubleshooting options before returning the
unit for battery replacement. For battery replacement see page 19.
■The Transmitter Range Is Reduced
•The range may be affected by variations in terrain weather buildings and
other obstructions.
•For best operation hold the transmitter with the antenna pointed toward the
sky not towards the dog.
•Keep your fingers away from the antenna. Touching the antenna will greatly
reduce the range.
■Cold Weather Performance
•All batteries experience a drop in voltage during cold weather.
•The batteries may run down more quickly in cold weather.
•The stimulation the dog feels may not be as strong in cold weather.
•For best results in the cold months charge and store your remote trainer at
room temperature when not in use.
For other Troubleshooting questions please contact Customer Service.
[phone] M-F 9 am - 5 pm EST.

18
Warranty Registration
Your Warranty Registration information must be sent to DogWatch within
30 days of purchase to activate your warranty. You may fill out the enclosed
Warranty Registration card and mail it to DogWatch Inc. or you may complete
your warranty registration online at www.dogwatch.com.
WARRANTY
DogWatch Inc. subject to the terms and conditions set forth hereunder hereby
warrants that it will repair or replace at it’s own discretion without charge for parts
or labor the product or any part thereof (other than batteries) which is found to be
defective by reason of improper workmanship and/or materials for the warranty
period of two (2) years from the original date of purchase. Batteries are warranted
for one (1) year. Warranty claims may be subject to dealer service charges and/or
manufacturers shipping and handling charges. Except for the express warranty
stated above Dogwatch Inc. disclaims all express and implied warranties or
merchantability or fitness for a particular purpose.
As a condition of this warranty Customer must (a) mail the warranty card provided
with the product to:
DogWatch Inc., 10 Michigan Drive, Natick, MA 01760
or complete warranty registration online at www.dogwatch.com within 30 days
after purchase (b) notify DogWatch Inc. of a claimed defect within the warranty
period after the purchase and (c) mail product back insurance and postage pre-
paid to DogWatch Inc. at the address above. DogWatch Inc.’s sole responsibility
under this warranty will be to repair or replace at its option any product or part
which DogWatch Inc. determines to be defective. In no event will DogWatch Inc. be
liable for any special indirect or consequential damages arising out of the pur-
chase or use of the product. In no event shall DogWatch Inc.’s liability exceed the
purchase price of the product.
This product is not intended for use with dogs who have a history
of aggressive behavior. Do not use this product if your dog has a history
of aggressive behavior or could cause harm to itself or others.
We recommend you consult a qualified professional who
has experience working with aggressive dogs.
Warranty & epair
WARNING