DogWatch BIGLEASH User manual

®
OWNER’S GUIDE

At DogWatch, Inc., “It’s all about your dog.”™Whether you own one of our
BigLeash Remote Trainers or one of our great Hidden Fence products, you can be
assured that you have purchased the most technologically advanced pet
containment and pet training products available.
Our extensive research and testing has resulted
in products that are safe for your pet while helping
you eep your pet safe.
Because of our commitment to excellence and value,
Consumer Digest has awarded our Hidden Fence a
“Best Buy” rating every year since 1998.
DogWatch®offers a full range of solutions for pet containment and training. Our
Hidden Fences contain your dog in your yard and can eep him out of areas that
are “off limits”, such as your garden or swimming pool. And our BigLeash Remote
Trainer is a safe, effective and pet-friendly way to help train your dog to respond to
your commands and eliminate undesirable behaviors.
We also have indoor systems that wor throughout your home to eep your dog off
couches and countertops, out of the trash, etc. — you name it.
To ma e sure that you get the most from your BigLeash Remote Trainer, please
follow the instructions outlined in this manual.
If you have any questions, please visit our website or call Customer Service:
1-800-793-3436 M-F 9 am to 5 pm EST.
Thank You or Purchasing
®
The BigLeash.
Big Results Are Close At Hand.
R E M O T E T R A I N E R by DogWatch

1
Table Of Contents
Important Saf guards .........................................................................................2
G tting Start d .....................................................................................................3
Charging the Transmitter and Receiver Collar ......................................................3
Turning the Transmitter and Receiver “On” and “Off” ..........................................3
Transmitt r F atur s............................................................................................4
1. Lanyard Loop ..................................................................................................4
2. Antenna /Range Information ............................................................................4
3. LCD Display......................................................................................................5
4. Correction Level Adjustment ............................................................................6
5. Collar 1/Collar 2 Feature ..................................................................................6
6. Correction Button A [Audible/Vibration] ..............................................................6
7. Correction Button B [Brief] ................................................................................6
8. Correction Button C [Continuous] ......................................................................6
Switching from Audibl to Vibration ..................................................................7
Using th T st Light to Ch ck Corr ction Function ..........................................7
R c iv r F atur s ................................................................................................8
Adjusting the Receiver Collar ..............................................................................8
Setting the Contact Posts.................................................................................... 8
Using the Receiver Collar for Training ..................................................................8
Battery Status Light..............................................................................................8
G n ral Training Consid rations ........................................................................9
Training Basics ..................................................................................................11
Ob di nc Training ............................................................................................13
B havior Training ..............................................................................................14
Barking ..............................................................................................................15
Digging ..............................................................................................................15
Jumping Up ......................................................................................................15
Jumping on Furniture ........................................................................................16
Chewing ............................................................................................................16
Chasing ..............................................................................................................16
Aggression ........................................................................................................16
Troubl shooting ................................................................................................17
Warranty & R pair ..............................................................................................18
Batt ry R plac m nt ........................................................................................19
Adding a S cond R c iv r Collar (Collar 2) ....................................................20

2
Important Safeguards
TO GET THE MOST FROM YOUR BIGLEASH®REMOTE TRAINER,PLEASE
FOLLOW THE PROCEDURES IN THIS MANUAL.
■It is important to understand the training process before using the trainer.
■Be consistent with your dog. Inconsistent cues (verbal and non-verbal) will
confuse your dog. A confused dog will have difficulty figuring out what you
want him to learn.
■Attempting to service the system yourself may invalidate the warranty.
■Keep the transmitter and receiver collar out of reach of children and others
unfamiliar with proper use of remote trainers.
■Periodically inspect your dog’s neck for irritation due to rubbing.
■This product is not recommended for training aggressive dogs. Dog aggression
should be handled by a qualified dog training professional.
If you have questions about your BigLeash Remote Trainer
visit our website - or - contact Customer Service at
1-800-793-3436, Monday-Friday, 9 am-5 pm.
THE SUCCESS OF ALL TRAINING REQUIRES REPETITION,
CONSISTENCY,PATIENCE AND A LOT OF PRAISE.
WARRANTY REGISTRATION
To activate Warranty coverage, register online at:
www.dogwatch.com - or - www.bigleash.com

Charging the Transmitter and Receiver Collar
FULLY CHARGE THE TRANSMITTER AND THE RECEIVER COLLAR BEFORE USING THE FIRST TIME.
■Both the transmitter and the receiver use a rechargable lithium polymer
battery. To charge the batteries plug the power adaptor into an electrical
outlet and insert the other end securely into the
charging port. Use the “Y” connector to charge
both batteries at the same time.
•The batteries take approximately 3-4 hours to charge.
•We recommend charging your transmitter and receiver
when not in use. A protection circuit prevents overcharging.
■Transmitt r scr n: Batt ry icon
•Low batt ry: Battery icon comes on and flashes.
•Charging: Battery icon stays on in a steady state.
•Charging compl t : Battery icon turns off.
When plugged-in: - The LCD screen backlight stays illuminated.
- The transmitter and receiver will not turn “on”.
■R c iv r collar: Batt ry status light
•Low batt ry: Light flashes red.
•Charging: Light turns steady red.
•Charging compl t : -Light turns steady green when plugged in.
-Light lashes green when unplugged and turned on.
✥For batt ry r plac m nt information, s pag 19.✥
3
Getting Started
ON/OFF
Alignm nt Mark rs
{
{
Hold the Alig me t
Markers Together
▲▲ ▲ ▲ ▲▲
■When the transmitter and receiver collar turn “on” you hear a low-to-hi
“beep” tone and the LCD screen turns on.
■Follow the same procedure to turn “off” the receiver and the transmitter.
You will hear a hi-to-low “beep” tone and the screen will turn off. Turning
your syst m “off” wh n not in us will h lp pr s rv th batt ry lif .
Turning the Transmitter and Receiver “ON” and “OFF”
Both th transmitt r and r c iv r must b turn d “on” to op rat .
Reminder: When plugged-in to charge, the transmitter and receiver will not turn “on” or “off”.
■To turn the transmitter and receiver “on”or“off” hold the transmitter and
receiver next to one another so the alignment markers (indicated below) on
the transmitter match the a ignment markers on the receiver.
See summary o page 8.
See illustratio o page 5.
Battery Ico

Transmitter Features
8
5
3
1
2
Collar 1/Collar 2
9On/Off Alignm nt Mark rs
Lanyard Loop
Ant nna
4Corr ction L v l
Adjustm nt
LCD Display
6
7
4
The BigLeash®Remote Trainer is the only remote trainer with two-way
communication between the transmitter and the receiver collar.
Corr ction Button B (Bri f)
Corr ction Button A
(Audibl / Vibration)
Corr ction Button C
(Continuous)
▲ ▲▲
Transmitter Features
1. Lanyard Loop
■A lanyard is supplied with each transmitter.
2. Antenna/Range Information
■Your BigLeash Remote Trainer provides more than a 1/4 mile range in optimal
conditions. Range will vary depending on environmental conditions such
as terrain weather vegetation buildings and other obstructions.
■How you hold the transmitter may affect the
range. For maximum range keep the antenna
pointed toward the sky. Pointing the transmitter
antenna toward your pet will reduce the range.
■Keep your fingers off the antenna. Touching the antenna during transmission
will greatly reduce the efficiency and the range of the antenna.
10 Charging Port
Hold the transmitter with the antenna up.

1 - 3 = Mild Correction
4 - 6 = Moderate Correction
7-10 = Strong Correction
5
■Correction Level
■Receiver Icon (Paw)
Indicates that the r c iv r collar
is ‘on’ and functioning properly.
Paw b inks if signa is ost
(dog out of range or collar
battery is depleted.)
■Transmitter Icon
Indicates that the transmitt r is
‘on’ and functioning properly.
Transmitter icon b inks to
indicate activation when any
button is pushed.
Exampl 1: Strong signal correction level 3 collar 1 and low transmitter battery.
Exampl 2: Weak signal correction level 3 collar 2 and good battery.
A wea signal usually indicates the dog is moving out of range of the transmitter.
■Transmitt r Batt ry Icon
Turns on and begins flashing
when the transmitter battery is
getting low.
■Collar 1/Collar 2Icon
Indicates which collar is receiving the signal when working with 2 dogs.
■Signal Strength
Indicated by the horizontal lines
between the transmitter and the
paw icons.
Batt ry Icon
•No icon = Charged battery
•Icon Flash s = Low battery
No lin s + Paw Icon blinks
= Not Communicating
Corr ction L v l 0 = Saf ty Mod
No Audible / No Vibration
No Correction
3. LCD Display
The LCD display on your transmitter lets you know your system is operating
properly. The LCD display illuminates briefly when the transmitter is turned on
or when one of the command buttons is pushed.
Training Tip:
Keep the trai er out of direct view of your pet whe usi g it so he does ot become
“tra smitter-wise.” It is importa t that he associates the correctio with his behavior,
ot with the tra smitter.
Collar 1
Receiver
Icon (Paw)
Example 1 Example 2
Transmitter Battery Icon
Signal
Strength
Transmitter
Icon Correction Level
Collar 2

4. Correction Level Adjustment
■The correction levels can be adjusted up or
down by pressing the correction level
adjustment buttons.
■Start at level 1 and increase the intensity level until you notice a reaction from
your dog; a quick head shake looking down even flicking an ear. You must
be focused on your dog when doing this. When you see the reaction that is
the level to start training. The appropriate level varies from dog to dog.
✧W r comm nd using th low st ff ctiv corr ction l v l. ✧
5. Collar 1/ Collar 2Feature
Every BigLeash transmitter comes with two-dog capability. Your transmitter
comes set for use with one dog but can easily be programmed for two dogs.
■If you are working with two dogs you will need two r c iv r collars.
Information about setting the remote trainer to work with two dogs is
provided on pag 20.
■The Collar 1 and Collar 2 buttons allow you to change commands between
the two collars. When working with 2 dogs (two collars) the transmitter
saves the settings for each collar. Th s ttings ar stor d in m mory and
change automatically when you switch from Collar 1 to Collar 2.
■When working with 2 collars (two dogs) the display on the LCD screen will
indicate if the transmitter is set to send the signal to the Collar 1 or Collar 2.
6. Correction Button A [Audible / Vibration]
■Pressing the ‘A’ button sends either an audibl
warning (sound only) or a vibration warning to the
dog’s receiver collar. This warning signal continues
as long as you press the button (up to 8 seconds.)
7. Correction Button B [Brief ]
■Pressing the ‘B’ button sends a bri f corr ction (~1 second) to the dog’s
receiver collar.
8. Correction Button C [Continuous]
■Pressing the “C’ button sends a continuous corr ction as long as you
hold the button down. If the button is not released the correction will
automatically stop after 8 seconds.
To repeat any of the corrections release the button and press again.
6
Correction Buttons
Use the ▲and ▼buttons to
the right of the LCD screen
to adjust the correction level.
Brie
Brie
Audible &
Audible &
Vibration
Vibration
Continuou
Continuou s s
Remember: Level 0 = Sa ety Mode (no audible, no vibration, no correction)

sing the Test Light to Check Correction Function
A test light is included with your BigLeash trainer. The test light is used to
confirm that the system is working properly.
■Turn both the transmitter and the receiver collar “on”.
■Hold the test light over the receiver with the contact posts
inserted into the test light as illustrated.
■With the test light placed over the contact posts press the
“B” or the “C” button on the transmitter. If the system is
functioning properly the light on the testing device will turn
on when you press the button.
- The higher the correction level the brighter the light.
- If the correction level is set too low the light may be
difficult to see.
- If the test light does not turn on check “Troubleshooting/Remote Trainer
Does Not Seem To Be Working” on page 17.
7
With the BigLeash you have the option of using the “A” Correction Button for
either an Audibl signal or a Vibration signal. The mode you select will depend
on your dog and your personal preference.
Wh n working with 2 dogs, th two collars ar s t ind p nd ntly.
TOSWITCH BETWEEN AUDIBLE AND VIBRATION:
■Turn the transmitter and the receiver collar “on”. Set to Collar 1 or Collar 2
as appropriate.
■S t th corr ction l v l to “0”.
■Hold th “A” button with the correction level at “0”.
Continue holding the “A” button. After ~5 seconds the transmitter will begin
to toggle between Audible (A) and Vibration (V). The mode will display on the
LCD screen.
➜To set to Audibl release the “A” button while the “A” is displayed
on the LCD screen.
➜To set to Vibration release the “A” button while the“V” is displayed
on the LCD screen.
■To test the setting return the transmitter to any correction level (1-10) and
press the “A” button.*
■The “A” button will remain set to either Audible mode or Vibration mode until
you change it. Collar 1 and Collar 2 are set and changed independently.
*NOTE:Audibl and vibration ar always th sam int nsity r gardl ss of th
corr ction l v l s tting, xc pt wh n s t to “0” (no signal).
Switching from Audible Mode to Vibration Mode

The BigLeash collar is waterproof for all-weather, year-round use.
■Adjusting th R c iv r Collar
Proper collar fit is important for successful training.
•Tighten the buckle so the contact posts fit snuggly against your dog’s
neck. Cut the collar to the appropriate length for proper fit.
•The collar should be snug but not so tight that it is uncomfortable or will
damage the dog’s skin or restrict movement of the dog’s head or neck.
•If the collar is too loose your dog may not respond to the correction. Also
a loose collar can move on the dog’s neck and can cause irritation.
■S tting th Contact Posts
•There are two sets of contact posts. The contact posts on the receiver will
work for most dogs. The extra set is sized for dogs with thick coats.
•Correct fit depends on the dog’s size neck shape coat and skin sensitivity.
The posts must make contact with the skin to feel the correction.
•For dogs with very thick coats you may need to trim some hair around the
contact posts in order for the posts to make contact with the skin.
■Using th R c iv r Collar for Training
•It is important that your dog does not become “collar wise” (i.e. learns to
associate the collar with the corrections.) See page 10 for suggestions
•The receiver collar is not designed to be worn for extended periods. We
recommend removing the collar at night. (This is a good time to re-charge
batteries.) Removing the collar when not in use will help prevent irritation of
the dog’s skin.
8
Receiver Features
The BigLeash®Receiver is attached to a dog collar and receives the commands
rom the handheld transmitter.
The BigLeash Receiver Collar Contact Posts and charging port on the
back o The BigLeash Receiver Collar
Battery Status Light
Battery Status Light
Turned on, charged Blinks GREEN
Turned on, low battery Blinks RED
Plugged-in, charging Steady RED
Plugged-in, ully charged Steady GREEN

9
General Training Considerations
nderstanding the Purpose of Training
Training is a method o changing your dog’s behavior. I used properly, your
BigLeash Remote Trainer will help you train your dog more e ectively.
Your remote trainer can be used to train your dog in two ways:
1. To r inforc appropriat b haviors such as “Come” “Sit” and “Stay.”
2. To liminat inappropriat b haviors such as jumping digging and excessive
barking.
nderstanding Your Dog’s Response To Stimulation
•Stimulation (the correction from the dog’s collar) has been a safe and effective
part of dog training for over forty years. All dogs respond differently when they
feel a mild stimulation. Some dogs may demonstrate little if any reaction while
others may yelp or jump back. Some dogs “freeze”.
•It is important to remember that your dog will not automatically understand what
to do when he receives a correction from the remote trainer. For training to be
effective, you must understand how to use the remote trainer appropriately.
•Set the Training Level just to the point of mild discomfort (like a quick tug on a
leash) to get the dogs attention without creating anxiety. Anxiety will make it
more difficult for him to learn. See page 6 Correction Level Adjustment.
✧W r comm nd using th low st ff ctiv corr ction l v l. ✧
Do not try to com ort your dog i he receives a correction.
It will create uncertainty or con usion about the training message.
Dog Personalities and Traits
•Keep in mind that dog personalities and traits differ among and within breeds.
It is important to understand your dog’s unique personality.
•A gregarious dog or a dog who is easily distracted may take longer to train.
Understanding your dog will make the training easier for both of you!
Creating The Right Environment
Attitude and Consistency are Important!
1. Keep the training “light”. Use lots of praise. Keep the dog’s spirits high.
2. Use high happy tones for praise. Use low tones for negative commands. Use
calm soothing tones to keep eager energetic dogs focused; and enthusiastic
praise to keep quiet dogs engaged in the activity.
3. In the early stages limit specific training sessions to 15-20 minutes. Include
periods of free play and praise to keep your dog enthusiastic and happy.

10
Getting the Most From Your BigLeash®Remote Trainer
■Appropriat and Prop r Us
As with any training program appropriate and proper use of the training
tools is directly related to the success of the training.
•Th r mot train r is not a short cut or a “punishm nt” tool. It should
be used to train your dog to avoid unwanted behavior and to reinforce the
training not as a way to punish him for bad behavior.
•Keep your training sessions short especially early in the training. As your
dog learns he will respond more quickly and training sessions may be
extended.
•The use of a voice command in conjunction with the remote trainer will vary
with the situation and your training goal. See examples of some specific
behaviors and suggested training techniques in the next section.
•Always b gin with a low int nsity l v l until you determine the
appropriate level for your dog.
•In the early stages of training most dogs respond to the first or second
brief correction (correction button ‘B’). Some dogs may need a few more
brief corrections (or a higher intensity level) depending on the dog’s
personality and level of excitement or distraction.
•For some behaviors - such as chasing or barking - a continuous correction
(correction button ‘C’) of several seconds may initially be needed.
•The goal is for your dog to understand that he can avoid the stimulation by
responding appropriately.
•Do not let your pet know that it is you giving him the correction. Do not
make it obvious you are using the transmitter as part of the correction
process.
■K ping Your Dog From B coming “Collar-Wis ”
•Do not let your dog become “collar-wis ”. Have your dog wear the
BigLeash collar for a few days before you begin training so your dog will
not learn to associate the collar with training corrections.
•When you begin training have your dog wear the collar for a sufficient
period before and after the training session so that he does not associate
the collar with the training corrections.
•Have your dog continue to wear the collar whenever you work with him for
at least a month even after he seems to be trained. It is good to have the
collar on the dog in case he needs an occasional reminder.

11
■Consist ncy and Timing
•Consist ncy is critical for succ ssful training.
•Timing of the correction is also critical. The correction must occur at the
time of the behavior. If the behavior is not occurring when the correction
occurs the dog will not associate the correction with the behavior.
If you want your dog to stop digging in the yard the correction must occur
while the dog is digging . . . not later when you find the hole.
Before sing the Remote Trainer
Be ore you begin a behavior training program using your BigLeash®Remote
Trainer, your dog must know the basic obedience commands.
■Th “H l” Command
The ‘heel’ command is the first command to teach your dog.
•With your dog on a short leash at your side begin walking while gently
pulling on the leash to keep your dog positioned at your side as you walk.
•Say the command ‘heel’ each time you use the leash to keep your dog in
position at your side.
•Praise your dog when he returns to the correct position after you say the
‘heel’ command.
•With repetition consistency patience and praise your dog should be
walking next to you in just a few short training sessions.
■Th “Sit/Stay” Command
The second leash training command is ‘sit/stay’. ‘Sit’ is the command; ‘stay’
is the implied.
•Begin the ‘sit/stay’ training by walking on lead in the ‘heel’ position. Come
to a stop and tell the dog to ‘sit’. Initially you may need to put pressure on
your dog’s rear end to teach him the sit position. Reward with praise when
he ‘sits’.
•With the dog in the ‘sit’ position move away to the end of the leash. When
you tell your dog to ‘sit’ he should ‘stay’ until you give him a different
command. When the dog sits and stays return to the dog to reward with
praise.
•To release your dog from the ‘sit’ position give a gentle tug on the leash
and command the dog to ‘come’.
•As with all training use repetition consistency patience and praise.
Training Basics

Preparing to se the Remote Trainer
■Fitting th R c iv r Collar
•Before you begin training be sure the receiver collar fits properly.
•The collar should be worn snugly on your dog’s neck.
This is xtr m ly important! If the collar is too loose
your dog will not receive the signal.
■Picking th Right Corr ction L v l
•There are 10 l v ls of corr ction so you can customize your remote trainer
for your dog’s temperament and the type of training you do.
•Start with th low st l v l. Before you begin training test the dog’s
response at Level 1. Use the Brief (B) correction button and watch the dog’s
response. If your dog’s response is similar to that of a quick tug on his leash
you are at a good starting point. If your dog does not respond at Level 1
increase the correction one level and test his response. Continue until your
dog can just feel the stimulation (like a quick tug on a leash.)
•You may need to adjust the correction level during training as the dog’s
response may change with excitement or distraction.
■Und rstanding th Typ s of Training Corr ctions
Your BigLeash trainer allows you to adjust the typ the duration and
the l v l of the training correction.
•The “A” button provides either an audibl or a vibration warning. In many
training situations it is recommended that the correction be preceded by a
short audible or vibration warning. Your pet will learn to avoid a correction by
responding to the audible or vibration warning.
See page 7 for instructions to switch from audible to vibration mode.
•The “B” button provides a bri f 1 s cond corr ction (regardless of how
long you hold the button down.) Press the “B” button repeatedly for a series
of brief corrections.
•The “C” button provides a continuous correction (up to 8 seconds.) This
allows you to control the duration of the correction when the situation calls
for a longer correction.
NOTE FOR PROFESSIONAL TRAINERS:To increase or decrease the correction level during a
‘continuous’ correction change the correction level (▲or ▼) while pressing the “C” button.
You should be able to place o more tha your thumb
betwee the co tact posts a d the dog’s eck.
Whe checki g s ug ess of collar, the dog’s eck
should be faci g dow (s iffi g positio ) as this
positio is where the dog’s eck is the smallest.
12

13
Obedience Training
Obedience Training Basics
■Plan Your Training for Succ ss
•Make sure your dog understands basic commands such as “come” “sit”
and “stay”. If he understands the command but does not always obey the
remote trainer can be used to reinforce the appropriate response to the
command (i.e. if he responds appropriately he turns-off or avoids the
correction.) If he does not have a basic understanding of the command
the remote trainer will not be effective.
•Set the Training Level to the lowest effective level to get your dog’s
attention without making him anxious when you send a correction.
•Begin your training sessions in an open area free from distractions. If the
area is not fenced to contain the dog use a long rope to keep the dog from
leaving the area until you are sure he is consistently responding to your
commands.
•Do not make it obvious that you are controlling the corrections. You want
your dog to associate his behavior with the correction - - not you or the
remote trainer!
•Do not comfort your dog when he receives a correction.
•Keep the initial training sessions short (15 - 20 minutes) but r p at th
training r gularly and fr qu ntly, especially during the early stages. Dogs
learn by repetition and reinforcement.
•Reward your dog during training sessions with praise and periods of play.
•B consist nt. Always use the same commands.
•When your dog has learned the commands in the first setting gradually
increase the level of distractions and continue the training in different
settings. Increase the distractions gradually so your dog continues to
associate the correction with the behavior not the distractions.
■Using th R mot Train r
•For Obedience Training use the Continuous stimulation (button ‘C’). Begin
the stimulation at the same time you give the command. Do not wait until
after you give the command as the dog may already be trying to comply by
the time you press the button.
•As your dog begins to understand that the stimulation stops when he
responds to the command he will begin to respond more quickly. As he
responds more quickly the duration of the stimulation should shorten also.
•When he is responding almost immediately to your command begin using
the trainer only if you must repeat the command.

14
Behavior Training
A ter your dog understands the basic obedience commands, you are ready to
begin more speci ic behavior training with your BigLeash®Remote Trainer. All o
the general and obedience training basics also apply to behavior training.
Behavior Training Basics
■Th Basics of G n ral “Avoidanc ” B havior Training
•“Avoidance training” is teaching your dog to associate the correction with
the problem behavior and helping him learn that in order to avoid the
correction he must stop the behavior.
•When correcting your dog’s behavior you must take into consideration that
not all activities such as barking should be eliminated completely. The
goal of your training should be to control problem behavior rather than to
eliminate normal and acceptable aspects of the same behavior.
•Remember that your dog will not automatically understand what to do
when he receives a correction from the remote trainer. For training to be
effective, you must use the remote trainer appropriately.
•Some dogs will learn quickly even with a very low correction level; others
may need higher levels to get their full attention. For most dogs and most
behaviors we recommend beginning with a low level before trying
incrementally higher levels.
✧W r comm nd using th low st ff ctiv corr ction l v l. ✧
•It is best to minimize your association with giving the correction. Do not
make it obvious that the transmitter is associated with the correction.
•The use of verbal commands and/or audible/vibration alerts varies with the
training situation and the training method. In some training situations you
may want your dog to associate the behavior only with the correction with
no verbal command or audible/vibration warning. In other situations a
verbal command and/or audible/vibation warning may be appropriate.
•Do not praise or comfort your dog after giving him a correction.
•Consistency and the timing of the correction are both very important.
This Owner’s Guide provides only g n ral training xampl s or common
behaviors. There are many books and online guides which cover topics more
speci ic to various types o dog training. Advice and assistance rom a
pro essional dog trainer amiliar with remote trainers may also be help ul.

15
Examples of Specific Behaviors
Training Methods
There are several training approaches used by professional dog trainers. When
using a remote trainer some trainers advocate preceeding the correction with a
voice command and/or audible/vibration warning; others believe that some
behaviors are eliminated more effectively if there is no preceeding verbal
command or audible/vibration warning.
Whichever training approach you use the key is to b consist nt. The following
examples offer general approaches for using the remote trainer to address
specific behaviors. Any of the suggested corrections may be preceeded with a
verbal command (such as “No”) and/or an audible/vibration warning depending
on the behavior your training goal and preferred approach.
•Barking is a natural part of dog behavior and dogs should be allowed to
bark as a normal part of what they do. Use the BigLeash trainer only to
correct barking that is excessive or overly aggressive. It is important to be
consistent when correcting your dog’s barking.
•Use a “quiet” or “no barking” command backed up with a correction from
your remote trainer.
•Dogs dig for many reasons; they may be looking for a cool place to lie
down or they may just be bored.
•To train your dog that digging in certain areas is not acceptable apply a
correction the moment he starts to dig.
•Dogs generally jump up to get attention. To correct jumping all members
of the family and all guests need to be consistent when training.
•When your dog wants to jump up instruct him to sit instead and then give
him the praise and attention he is looking for.
•If the Trainer is needed to correct jumping up on people press the Brief (B)
correction button whenever he jumps up. Do not praise the dog when he
gets off.
•Use the same approach to correct jumping up to steal food from the
counter or the table. If your dog usually does this when you are not in the
room you may need to leave food on the counter or the table then go
where you can observe the dog but he cannot see you.
Digging
Jumping p
Barking

16
•You can train your dog to stay off of ALL furniture; or you can limit your
training to specific furniture. Regardless it is crucial that you are
consistent. Any furniture that is off limits’ should ALWAYS be off limits.’
•Timing is important. Apply a correction the moment your dog starts to
climb on the furniture.
•Your dog should associate the act of jumping on the furniture with the
correction so he will avoid the selected furniture in the future.
•You can also conditionally train your dog that jumping on furniture
uninvited results in a negative response (a correction) while responding to
your invitation will be rewarded with praise. Use a lower correction level for
conditional training than you would for “off limits” training.
•Chewing is a natural behavior for dogs. As with barking acceptable and
unacceptable chewing must be defined so that training corrections can be
applied consistently.
•Teach your dog that there are things he is allowed to chew (special chew
toys bones etc.) and things he should not chew (shoes socks garden
hoses etc.). As soon as your dog begins to chew something that he
shouldn’t apply a correction.
•The most common chasing behavior is chasing cars.
•Care must be taken when teaching your dog not to chase cars. Be sure
that when you apply a correction your dog is away from the moving
vehicle.
•Generally dogs are excited and distracted when they are chasing
something and use of the Continuous correction [C button] may be
necessary especially in the early stages of training.
•Dogs chase and engage in aggressive behaviors (such as biting and
fighting) for a variety of reasons that differ from one dog to another.
For training aggr ssiv dogs, w r comm nd that you consult a
prof ssional train r or animal b haviorist who has xp ri nc
working with aggr ssiv dogs.
Chewing
Jumping on Furniture
Chasing
Aggression

17
Troubleshooting
■Th R mot Train r Do s Not S m To B Working
•Check to see that both the transmitter and receiver are turned “on”.
•Ch ck to mak sur th batt ri s in both th transmitt r and th
r c iv r ar charg d.
•Note: Neither the transmitter nor the receiver will operate when connected
to the power adaptor.
■Dog Do s Not S m To R spond
•Check to see that the collar is snug and that the ends of the contact posts
are touching your dog’s neck.
•Check the correction level. If the correction level is set to “0” (safety mode)
no signal will be sent to the receiver. If it is on a low setting try increasing
the correction level (gradually). See Correction Level Adjustment
instructions on page 6.
•If your transmitter is programmed for use with 2 dogs check to see that
your transmitter is set to the correct collar.
■Th Batt ry Do s Not S m To Charg
•Be sure the charging plugs are fully and securely inserted. See page 3 for
Battery Charging instructions.
•Make sure you are using the battery charger provided with the trainer.
•If the battery does not hold a charge as long as it used to it may be time to
replace the battery. If the battery is less than two years old check with
Customer Service for other troubleshooting options before returning the
unit for battery replacement. For battery replacement see page 19.
■Th Transmitt r Rang Is R duc d
•The range may be affected by variations in terrain weather buildings and
other obstructions.
•For best operation hold the transmitter with the antenna pointed toward the
sky not towards the dog.
•Keep your fingers away from the antenna. Touching the antenna will greatly
reduce the range.
■Cold W ath r P rformanc
•All batteries experience a drop in voltage during cold weather.
•The batteries may run down more quickly in cold weather.
•The stimulation the dog feels may not be as strong in cold weather.
•For best results in the cold months charge and store your remote trainer at
room temperature when not in use.
For other Troubleshooting questions please visit the website -or-
contact Customer Service. [phone] M-F 9 am - 5 pm EST.

18
Warranty R gistration
Your Warranty R gistration information must b s nt to DogWatch within
30 days of purchas to activat your warranty. You may fill out the enclosed
Warranty Registration card and mail it to DogWatch Inc. or you may complete
your warranty registration online at www.dogwatch.com.
WARRANTY
DogWatch Inc. subject to the terms and conditions set forth hereunder hereby
warrants that it will repair or replace at it’s own discretion without charge for parts
or labor the product or any part thereof (other than batteries) which is found to be
defective by reason of improper workmanship and/or materials for the warranty
period of two (2) years from the original date of purchase. Batteries are warranted
for one (1) year. Warranty claims may be subject to dealer service charges and/or
manufacturers shipping and handling charges. Except for the express warranty
stated above Dogwatch Inc. disclaims all express and implied warranties or
merchantability or fitness for a particular purpose.
As a condition of this warranty Customer must (a) complete warranty registration
online at www.dogwatch.com - or - mail the warranty card provided with the
product to: DogWatch Inc., 10 Michigan Driv , Natick, MA 01760
within 30 days after purchase (b) notify DogWatch Inc. of a claimed defect within
the warranty period after the purchase and (c) mail product back insurance and
postage prepaid to DogWatch Inc. at the address above. DogWatch Inc.’s sole
responsibility under this warranty will be to repair or replace at its option any
product or part which DogWatch Inc. determines to be defective. In no event will
DogWatch Inc. be liable for any special indirect or consequential damages arising
out of the purchase or use of the product. In no event shall DogWatch Inc.’s liability
exceed the purchase price of the product.
This product is not int nd d for us with dogs who hav a history
of aggr ssiv b havior. Do not us this product if your dog has a history
of aggr ssiv b havior or could caus harm to its lf or oth rs.
W r comm nd you consult a qualifi d prof ssional who
has xp ri nc working with aggr ssiv dogs.
Warranty & Repair
WARNING
To activate Warranty coverage, register online at:
www.dogwatch.com - or - www.bigleash.com