domi outdoor living LGMF1596 User manual

ASSEMBLY MANUAL
10'×12' Metal Patio Gazebo
MODEL#:LGMF1596
Missing part? Damaged? Contact us via email at
[email protected]
Copyright 2022-2024 domi LLC. I All Rights Reserved.
©
www.domioutdoorliving.com

Use bolts to secure the frame to the ground to against the strong wind.
！

Pole Beam
BeamBeam
Beam Corner Roof Bar
Corner Roof Bar Connector Roof Bar
Solidfying Bar Solidfying Bar
Finishing Bar
Finishing Bar Finishing Bar
Finishing Bar Finishing Bar
Finishing Bar

Finishing Bar Finishing Bar
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel Roof Panel
Roof Panel
Roof Panel Roof Panel

Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Roof Panel
Net Frame Net Frame
Net Frame Base Joint Cover
Joint Cover Union Bar Corner
Solidifying Bar
Corner
Solidifying Bar
Inside Roof
Connector
Outside Roof
Connector J-Hook Bracket
Bracket
Bracket
Bracket Joint Cover

Hook Spacer Bracket Corner Cover
Finishing End Solid Sidewall
(need to buy extra)
Finishing End Mosquito
Sidewall
Plastic Bracket Plastic Bracket Plastic Bracket Plastic Bracket
Plastic Bracket

(1) Attach 2 Part #B1 to Part #A
with 4 Bolts #8.
(2) Attach 2 Part #B2 to Part #A
with 4 Bolts #6.
(3) Attach Part #B to Part #A
with 3 Bolts #8.
(4) Repeat the above procedures to assemble the other 3 Part #A.

(1) Insert Part #C2 into Part #C1
and secure with 3 Bolts #8.
(2) Insert the other side of
Part #C2 into Part #C and
secure with 3 Bolts #8.
(3) Connect Part #C1 and
Part #C through Part #C2.
(4) Insert Part #X into the beam
and secure with 1 Bolt #8.
(5) Secure the bottom of Part #X and
Part #C/C1 with 3 Bolts #8.
(6) Repeat the above procedures to assemble the other Part #C
and Part #C1.

(1) Insert Part #C2 into Part #D,
and secure with 3 Bolts #8.
(2) Insert the other side of
Part #C2 into Part #D1 and
secure with 3 Bolts #8.
(3) Connect Part #D and
Part #D1 through Part #C2.
(4) Insert Part #X into the beam
and secure with 1 Bolt #8.
(5) Secure the bottom of Part #X and
Part #D/D1 with 3 Bolts #8.
(6) Repeat the above procedures to assemble the other
Part #D and Part #D1.

(1) Connect Part #C/C1 and #D/D1 to Part #A with 8 Bolts #4.
(From Outside)
(2) Repeat the above procedures to assemble the other 3 corners.
Please don't tighten all bolts.

(1) Connect Part #C/C1 and #D/D1 to Part #A with 4 Bolts #8.
(From Inside)
(2) Repeat the above procedures to assemble the other 3 corners.
Please don't tighten all bolts.
Inside View

(1) Affix Part #R and Part #R1 to the frame with 8 Bolts #8.
(2) Repeat the above procedures to assemble the other 3 corners.
Please don't tighten all bolts.
Inside View

(1) Cover the corner with Part #X1. (2) Secure with 2 Self-tapping
Screws #3. (from top to bottom)
(3) Secure with 2 Self-tapping
Screws #3.
(from bottom to top)
(4) Repeat the above procedures to assemble the other 3 corners.
Tighten all bolts.

Assemble the 4 Corner Roof Bars:
(1) Connect Part #E1 and Part #E with 2 Bolts #8 .
(2) Attach Part #U to Part #E with Bolt #8 .
(3) Repeat the above procedures to assemble the other
3 Corner Roof Bars.

Please have a freestanding ladder ready at the center of the gazebo.
(1) Place 4 Part #E1 on the 4 corners of Part #S.
Secure with 8 Bolts #8 (from bottom to top)
ATTENTION: You can also finish
this step on the ground and then
lift 4 corner roof bars and inside
roof connector to the top together.
(Need 2 people and 2 ladders)
Outside View
(2) Place 4 Part #E on 4 Part #A; Secure with 8 Bolts #8.
Outside View

(1) Attach Part #U1 to Part #E2 with Bolt #7 .
(2) Repeat the above procedures to assemble the other 3 roof bars.

(1) Place Part #E2 on Part #S.
Secure with Bolt #8 (from bottom to top). Outside View
Inside View
(2) Connect Part #E2 and the Assembled Beam(D&D1) with part #U1.
Secure with 2 Bolts #8.
(3) Repeat the above procedures to assemble the opposite side.

(1) Place Part #E2 on part #S. Secure with Bolt #8
(from bottom to top).
Outside View
Inside View
(2) Connect Part #E2 and the Assembled Beam(C&C1) with part #U1.
Secure with 2 Bolts #8 .
(3) Repeat the above procedures to assemble the opposite side.