domi outdoor living LGMF8008 User manual

ASSEMBLY MANUAL
10'x12' HARDTOP GAZEBO
WITH DOUBLE ROOF
Missing part? Damaged? Contact us via email at
[email protected]
Copyright 2022-2024 domi LLC. I All Rights Reserved.
©
MODEL#: LGMF8008
www.domioutdoorliving.com

1

2

HOOK PLASTIC
LOCK
PANELS
SOLID
SIDEWALL
SOLID
SIDEWALL
MOSQUITO
SIDEWALL
MOSQUITO
SIDEWALL STRAPES
MESH JOINT
COVER PLASTIC
BAR
Yb
Z5 PLASTIC
BAR
3

Attention: You can also put the plastic caps in the last step.
4

5

6

7

C1
C1
C
C
C2
C3
C3
C2
① ②
After you finish putting the
hooks into the tracks, secure
with part N & AA by using
screws #5.
8x

9
16x

From bottom to top
10

From bottom to top
11

Connect both the outside roof connector #Q1 and the mesh #Z5
to the inside roof #Q with screws #7 as the picture shows.
ATTENTION: The holes of part #Z5, #Q and #Q1 need to be
aligned, on the same vertical line.
From bottom to top
12

Insert the part #BB/CC into the holes that around the edge
of the part #Z5.
MESH
13

Firstly, attach part #F2, #F1 and #R1 to #E as the left picture
shows, and then secure the #BB to the finishing bars with
screws #7.
2x
2x
4x
4x
BB
BB
Inside View
14

Firstly, attach part #F, #F1 and #R1 to #E as the
picture shows, and then secure the #CC to the
finishing bars with screws #7.
2x
2x
2x
2x
Inside View
15

Attach part #R to the part #D, and then secure the corners of
#Z5(MESH) to the 4 corner roof bars with screws #7 as the
right picture shows.
16

Insert panels (Part T,T1 and T2) into the slots of roof bars
as shown in diagram.
17

Affix finshing bars (Parts G, G1 and G2) to roof bars
(Part E and D) using finishing end (Part R and R2)
and screw #1 as shown in diagram.
18