29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
enquiries@domuslighng.com | www.domuslighng.com
Installaon Manual
NEO-SM-TILT-10 Specicaons Date: 05/2018
Voltage: 240V Lumen (±5%): Extra Warm White 2700K - 850lm
Warm White 3000K - 900lm
Neutral White 4000K - 955lm
White 5000K - 1010lm
Dimmable: Yes
Power: 10W Beam Angle: 24°/36°/60° Operang Temp: -20°C~45°C
IP Rang: IP20 CCT: 2700K - 3000K - 4000K - 5000K Power Factor: 0.85
CRI: ≥80 Lifespan: 50,000hrs
Thank you for purchasing your new LED NEO-SM-TILT-10, Please take the me to read and understand the
instrucon sheet below. Failure to do so may void warranty.
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched o before ng this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
Step 1: Take out the fixtures and
fing from the carton.
Step 2: Loosen the screws on
surface mounted frame.
Step 3: Hammer the anchors into the
ceiling according to the hole distance
Step 4: Fix the frame to the ceiling
with screws provided.
Step 5: Fix the “L””N”“G”into the
terminal block.
Step 6: Screw back the lamp to the frame
according to step 2, adjust
the lighng direcon.
10W
20W
80mm
56mm
