Dorel Asia 5-PC PEDESTAL DINING SET User manual

DA7104B
Date of purchase:
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
NOTE:
(TAKEN FROM CARTON)
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
DOREL ASIA
Model No:
UPC CODE:
0-65857-16532-6
Lot number:
_____________________________________
5-PC PEDESTAL
DINING SET
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used
occasionally to clean the surface. Dry immediately and buff lightly, following the grain. Avoid
using harsh cleaners and abrasive products.
Use coasters to prevent the formation of moisture rings and trivets to protect from hot items. Cover
extension leaves (if applicable) with a soft protective fabric before storing. Do not slide objects
across the surface - always lift them.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to misuse
or abuse or which has been altered or repaired in any way. This warranty gives you specific legal
rights and you may also have other rights which vary from State to State.
Estimated assembly time: 45 minutes.
CARE AND CLEANING
Phillips head screw driver is not included.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES:
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to product finish.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

FLAT WASHER
60 PCS
BOLT
4 PCS
5
6
Ø1/4" x 3"
ALLEN KEY
1 PC
BOLT
16 PCS
Ø1/4" x 2-1/4"
BOLT
16 PCS
7
8
ALLEN WRENCH
1 PC
8MM x 1-1/2"
Ø5/16" x 19MM
Ø5/16" x 1-1/4"
1
2
NUT
8 PCS
SPRING WASHER
60 PCS
3
4
DA7104B
5-PC PEDESTAL DINING SET
Ø5/16" x 12MM
Ø5/16" x 12MM
HARDWARE LIST
BOLT
16 PCS
WOOD SCREW
12 PCS
9
10
Ø1/4" x 1-1/2"
1/4"x2-1/4"

DA7104B
5-PC PEDESTAL DINING SET
PARTS LIST
A
B
TABLE TOP
1 PC
TABLE BASE PANEL
1 PC
C
D
CENTER POST
1 PC
LEG
4 PCS
SEAT FRAME
4 PCS
SEAT BOARD
4 PCS
CHAIR BACK FRAME
4 PCS
G
H
FRONT LEG
8 PCS
E
F
1/4"x2-1/4"

DA7104B
5-PC PEDESTAL DINING SET
STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8STEP 9STEP 10STEP 11
STEP 1
Place center post (C) upside down on a clean smooth surface.
Remove the plastic plugs from the legs (D).
Attach legs (D) to the center post (C) using nuts (1), spring washers (2) and flat washers (3).
Fully tighten the nuts (1) with Allen wrench (6).
①
③
②

DA7104B
5-PC PEDESTAL DINING SET
STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8STEP 9STEP 10STEP 11
STEP 2
Turn the assembled pedestal upright.
Attach the table base panel (B) to the center post (C) with spring washers (2), flat washers (3) and
bolts (4) as shown.
Fully tighten the bolts (4) using Allen key (7).
③
②
④

DA7104B
5-PC PEDESTAL DINING SET
STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8STEP 9STEP 10STEP 11
STEP 3
Place the table top (A) upside down on a clean, smooth surface.
Attach the table pedestal (assembled in the previous step) to the table top (A) using spring
washers (2), flat washers (3) and bolts (9) as shown.
Fully tighten the bolts (9) using Allen key (7).
③
②
A
TOP
C
D
B
7
9
9
92
2
23
3
3
⑨

DA7104B
5-PC PEDESTAL DINING SET
STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8STEP 9STEP 10STEP 11
STEP 4
Turn the table upright.
Adjust the levelers underneath each leg to ensure that the table level with the floor both vertically
and horizontally.
You've finished assembling the dining table.

DA7104B
5-PC PEDESTAL DINING SET
STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8STEP 9STEP 10STEP 11
STEP 5
Attach the front legs (F) to seat frame (G) with spring washers (2), flat washers (3) and bolts (5)
using Allen Key (7).
NOTE: Do not fully tighten the bolts in this step.
③
②
⑤

DA7104B
5-PC PEDESTAL DINING SET
STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8STEP 9STEP 10STEP 11
STEP 6
Attach the assembled seat frame (G) to the chair back frame (E) using bolts (8), spring washers
(2) and flat washers (3) at the corners of the seat frame (G).
Use bolts (9), spring washers (2) and flat washers (3) at the center of seat frame (G) to secure it to
chair back frame (E) as shown.
Use Allen Key (7) to tighten the bolts (8 & 9).
NOTE: Do not fully tighten the bolts in this step.
Turn the chair frame upright.
Fully tighten all bolts previously installed.
NOTE: Make sure that the chair levels with the floor both vertically and horizontally before
tightening all bolts.
③
②
⑨
⑧