Dorel Asia WM5278T-W User manual

UPC CODE:
(TAKEN FROM CARTON)
Twin Metal Bed
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
_______ / _______ / _______
Lot number:
Date of purchase:
Model No:
WM5278T-W
DOREL ASIA
0-65857-16527-2
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

* Ensure all parts and components are present before beginning assembly.
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the
repair or replacement of defective furniture components and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected
to misuse or abuse or which has been altered or repaired in any way. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
Check bolts/screws periodically and tighten them if necessary.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
MAINTENANCE
* DO NOT use power tools.
* Phillips head screw driver is not included.
* CAUTION: Adult assembly required.
CARE AND CLEANING
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Do not soak or
wash in hot water. Wipe with a soft, damp cloth if necessary. Do not use abrasives, cleansers
or polish.
NOTES:
* Assembly and handling may require two people.
* Estimated assembly time is 45 - 60 minutes.
* Assemble on a soft, smooth surface to prevent damage to product finish.
LIMITED WARRANTY
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
E-MAIL: [email protected]
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CALL 1-800-295-1980

1 2 3
4 5 6
78910
Ø1/4" X 9/16"
Ø1/4" X 1-9/16"
Ø1/4" X 1-3/4"
Ø1/4" X 1-15/16"
Ø1/2" X 1/16"
Ø10 mm X 2 mm
10 mm X 6 mm
14 PCS
4 PCS
Ø10 mm X 35 mm
12 PCS
6 PCS
6 PCS
1 PC
1 PC
NUT
THREADED PIN
ALLEN WRENCH
ALLEN KEY
8 PCS
BOLT
FLAT WASHER
SPRING WASHER
6 PCS
10 PCS
Twin Metal Bed
HARDWARE LIST
BOLT
BOLT
BOLT
WM5278T-W

A B C
D E F
G H I
J K L
M
Twin Metal Bed
PARTS LIST
HEADBOARD
HEADBOARD POST
BOTTOM CROSS BAR
WM5278T-W
1 PC
LEFT SIDE RAIL
(WITH 1 BRACKET)
LEFT SIDE RAIL
(WITH 2 BRACKETS)
RIGHT SIDE RAIL
(WITH 1 BRACKET)
1 PC
2 PCS
1 PC
1 PC
1 PC
RIGHT SIDE RAIL
(WITH 2 BRACKETS)
SLAT
(WITH 1 HOLE)
SLAT
(WITH 2 HOLES)
1 PC
2 PCS
1 PC
SUPPORT LEG
FOOTBOARD
FOOTBOARD POST
4 PCS
4 PCS
1 PC
2 PCS
FINIAL

Twin Metal Bed
WM5278T-W
STEP 1
Attach the headboard (A) and bottom cross bar (C) to headboard posts (B) with bolts (4). Use
Allen Key (10) to tighten the bolts.
NOTE: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
4

Twin Metal Bed
STEP 2
WM5278T-W
Attach the footboard posts (L) to the footboard (K) with the bolts (4). Use Allen Key (10) to
tighten the bolts.
NOTE: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
4

STEP 3
Twin Metal Bed
Attach the left side rails (D & E) with the bolts (1), flat washers (5) and spring washers (6).
Use Allen Key (10) to tighten the bolts.
WM5278T-W
1
5
6

STEP 4
Twin Metal Bed
WM5278T-W
Attach the right side rails (F & G) with the bolts (1), flat washers (5) and spring washers (6).
Use Allen Key (10) to tighten the bolts.
1
5
6

STEP 5
Twin Metal Bed
Attach the assembled left and right side rail to the headboard and footboard with bolts (3) and
nuts (7). Use Allen Key (10) and Allen wrench (9) to tighten the bolts and nuts.
WM5278T-W
NOTE: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
3
7
A
B
B
L
L
K
E
G
D
F

STEP 6
Attach the support legs (J) to the slats (H & I) with bolts (2). Use Allen Key (10) to tighten
the bolts.
Twin Metal Bed
WM5278T-W
NOTE: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
2