Dorel Asia DA7640E User manual

INFORMATION. PLEASE READ AND
NOTE:
CONTAINS IMPORTANT SAFETY
KEEP FOR FUTURE REFERENCE.
0-65857-17351-2 (ESPRESSO)
0-65857-17352-9 (WHITE)
Lot number:
______ / ______ / ______
Date of purchase:
(TAKEN FROM CARTON)
______________________________
THIS INSTRUCTION BOOKLET
UPC CODE:
DOREL ASIA
Model No:
DA7640W (WHITE)
DA7640E (ESPRESSO)
FULL SIZE
BED
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace the
part
FREE of charge.
Tel #: [phone]
E-Mail: [email protected]om
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*Read all instructions before use.
*A Phillips head screw driver is not included.
*DO NOT use power tools.
*
CAUTION: Adult assembly required.
*Assembly may require two people.
*Estimated assembly time: 30 minutes.
Check bolts/screws periodically and tighten them if necessary.
MAINTENANCE
LIMITED WARRANTY
Dorel warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or repaired
in any way. This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: [email protected]
NOTES
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer
service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

1 2
3 4
5 6
7
FULL SIZE BED
JOINT CONNECTOR (4mm HEX HEAD)
8 PCS
WOOD DOWEL
24 PCS
∅1/4" x 100mm
∅10mm x 50mm
DA7640E / DA7640W
HARDWARELIST
∅6.5mm x 100mm
BARREL NUT
8 PCS
ALLEN KEY
1 PC
4MM
HEX SOCKET HEAD BOLT
3 PCS
FLAT HEAD WOOD SCREW
14 PCS
∅1/4" x 32mm
∅11.8mm x 15mm
∅4mm x 35mm
WOOD JOINT CONNECTOR (4mm HEX HEAD)
8 PCS

A B C
DA7640E / DA7640W
FULL SIZE BED
HEADBOARD POST
1 PC
HEADBOARD POST
1 PC
FOOTBOARD POST
1 PC
PARTS LIST

D E F
G H I
J K A1
FULL SIZE BED
PARTS LIST
FOOTBOARD POST
1 PC
HEADBOARD TOP CROSS
2 PCS
HEADBOARD CENTER CROSS
2 PCS
DA7640E / DA7640W
HEADBOARD BOTTOM
CROSS
2 PCS
SLAT WITH CENTER HOLE
3 PCS
SUPPORT POST
3 PCS
SLAT
4 PCS
SPACE BLOCK
2 PCS
SIDE RAIL
2 PCS

FULL SIZE BED
DA7640E / DA7640W
Insert wood dowels (2) into the headboard top cross (E), headboard center cross (F)
and headboard bottom cross (G) as shown above.
Attach headboard posts (A& B) and footboard top posts (C & D) to the crosses
(E,F,G) with wood joint connectors (3) using Allen key (7) as shown.
STEP 1

FULL SIZE BED
DA7640E / DA7640W
Insert barrel nuts (4) into the side rails (H) as shown above.
Attach headboard posts (A&B) and footboard posts (C&D) to the side rails (H) using joint
connectors (1) and Allen Key (7).
STEP 2

STEP 3
FULL SIZE BED
DA7640E / DA7640W
Attach the support posts (K) to slats (J) with hex socket head bolts (5) as shown.
Attach slat (I) to the side rails (H) with flat head wood screws (6). Make sure the slat
touches the corner posts (as close to the headboard as possible).
Attach the other slats (I & J) to the side rails (H) with flat head wood screws (6) using
a Phillips head screw driver (not included). Use space block (A1) to space them out
evenly as shown.
NOTE: If you notice that any of the slats (I & J) are not perfectly flat, be sure to
assemble them so that the slats (I & J) curves up in the middle and down on the
ends.

That's it! You've finished assembling your full bed.
FULL SIZE BED
DA7640E / DA7640W
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products
and/or products heavier than the maximum weights indicated may
result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Intended Maximum
Weight- 225 lbs. per
position

MODEL #: DA7640E / DA7640W
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: da[email protected]
Customer Service Fax Number 514-353-7819