Doro HandlePlus 334gsm User manual

Doro HandlePlus 334gsm

På/av
Sidoknapp (+ / -)
Menyknapp
Display
Knapplås N
Samtalsknapp/OK
Snabbval
Laddningskontakter (för
användning med ett
laddningsställ)
Högtalare
SOS-samtal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Avsluta samtal/radera/bakåt
Namnlista
Mikrofon
Knapp för nödsamtal
Batterilucka
Uttag för laddare
Uttag för headset
Halsrem
11.
12.
13.
14.
15.
16.
17.
18.
Svenska
English
Power on/off
Side key (+ / -)
Menu key
Display
Key lock N
Call key/OK
Speed dial
Charging contacts (for use
with charging stand)
Loudspeaker
SOS call key
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
End call/Back/Clear
Name list
Microphone
Emergency call key
Battery cover
Charging socket
Headset socket
Lanyard
11.
12.
13.
14.
15.
16.
17.
18.
18

Dansk
Strøm til/fra
Sidetast (+ / -)
Menutast
Display
Tastaturlås N
Opkaldstast/OK
Hurtigopkald
Stik til oplader
(til brug med ladestativ)
Højtaler
SOS-opkald
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Afslutte opkald/slette
Navneliste
Mikrofon
Nødopkaldstast
Batteridæksel
Stik til oplader
Stik til headset
Halssnor
11.
12.
13.
14.
15.
16.
17.
18.
Suomi
Virta päälle/pois
Sivupainike (+ / -)
Valikko-painike
Näyttö
Näppäinlukko N
Soittopainike / OK
Pikavalinta
Latauksen kosketuspinnat
(lataustelinettä varten)
Kaiutin
Hätäpuhelupainike
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Lopeta puhelu/Palaa/Tyhjennä
Nimiluettelo
Mikrofoni
Turvapuhelupainike
Akkukotelon kansi
Laturin liitäntä
Kuulokemikrofoniliitäntä
Kaulanauha
11.
12.
13.
14.
15.
16.
17.
18.
Norsk
Strøm på/av
Sidetast (volum)
Menytast
Display
Tastelås N
Ringetast/OK
Hurtigtaster
Ladekontakter
(for bruk med ladestativ)
Høyttaler
SOS-anrop
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Avslutt samtale/slette
Navnliste
Mikrofon
Tast for nødanrop
Batterideksel
Ladekontakt
Hodesettkontakt
Bærereim
11.
12.
13.
14.
15.
16.
17.
18.

1
English
Contents
Installation .................................... 2
Installing the SIM card and battery. . . . . . . . . . . . . . . . . . 2
Charging .................................... 3
Operation...................................... 4
Activatingthephone............................ 4
Makingacall................................. 5
Receivingacall ............................... 5
Volumecontrol................................ 5
Callinformation ............................... 5
Displaysymbols................................. 6
Additionalfunctions.............................. 7
Handsfreemode............................... 7
Textinput.................................... 7
Keylock..................................... 7
Headset..................................... 8
SOScalls999/112/911 ......................... 8
EmergencyCallkey............................. 9
Settings...................................... 10
Time&date................................. 10
Usersetup.................................. 11
Emergency.................................. 12
Speeddial.................................. 15
Networksetup ............................... 15
Securitysettings.............................. 16
Safetyinstructions.............................. 19
Troubleshooting ................................ 22
Careandmaintenance ........................... 24
Warranty and technical data . . . . . . . . . . . . . . . . . . . . . . . 25

2
English
Installation
Warning!
Turn off the phone and disconnect the charger before
removing the battery cover.
Installing the SIM card and battery
The SIM card holder is located behind the battery.
Remove the battery cover and the battery if it is already
installed.
Insert the SIM card by carefully sliding it into the holder.
Make sure that the SIM card’s contacts are facing inwards
and that the cut-off corner is pointing upwards. Take care not
to scratch or bend the contacts on the SIM card.
Insert the battery by sliding it into the battery compartment
with the contacts facing upwards to the right.
Replace the battery cover.
1.
2.
3.
4.

3
English
Charging
Warning!
Only use batteries, charger and accessories that have been
approved for use with this particular model. Connecting
other accessories may be dangerous and may invalidate the
phone’s type approval and guarantee.
When the battery is running low, is displayed and a warning
signal is heard. To charge the battery, connect the mains adapter
to the wall socket and to the charging socket .
is displayed briey when the charger is connected to the
phone, and when it is disconnected. The battery charge
indicator will be animated while charging.
If the phone is turned off when the charger is connected to the
phone only the battery charge status indicator will be shown in
the display.
It takes approximately 3 hours to fully charge the battery.
is displayed when charging is completed.
Save energy
When you have fully charged the battery and disconnected the
charger from the device, unplug the charger from the wall outlet.
Note!
To save power the LCD backlight goes off after a short while
but the phone is still charging. Press any key to illuminate
the display. Full battery capacity will not be reached until
the battery has been charged 3–4 times. Batteries degrade
over time, which means that call time and standby time will
normally decrease with regular use.

4
English
Operation
Activating the phone
Press and hold 1to turn the phone on/off.
The following messages may be displayed:
SIM card missing or
incorrectly inserted.
SIM card damaged or not
valid.
If the SIM card is valid but protected with a PIN code (Personal
Identication Number), PIN: is displayed.
Use the side keys +/– to enter the PIN-code and press q.
Delete with L.
On this phone there are 3 options to handle the function SIM
lock, see Settings/Security/SIM lock.
Note!
If PIN and PUK codes were not provided with your SIM card,
please contact your network operator.
Attempts: # shows the number of PIN attempts left. When
no more attempts remain, SIM blocked is displayed.
The SIM card must now be unlocked with the PUK code
(Personal Unblocking Key).
1. Enter the PUK code and conrm with q.
2. Enter a new PIN code and conrm with q.
Changing the language, time and date
The default language is determined by the SIM card. See Settings
on how to change language, time and date.

5
English
Important!
Before you can make calls you must carry out the steps
detailed in Settings.
Making a call
Press and hold the desired speed dial key (Ato D).
Alternatively, press the desired speed dial key (Ato D), and
press q.
Press Lto end the call.
Receiving a call
Press qto answer.
Alternatively, press Lto reject the call directly.
Press Lto end the call.
Volume control
Use the side keys +/– to adjust the sound volume during a call.
The volume level is indicated on the display.
Call information
During a call, the called or calling phone number and the elapsed
call time is displayed.
If the identity of the caller is withheld, Unknown is displayed.
Missed call
= Missed call
Press qto see the missed number.
Dial the missed call by pressing q.
Press Lto delete.
1.
2.
1.
2.
1.
2.
3.

6
English
Display symbols
Signal strength Keylock on
Ring + vibration Battery level
Headset connected Roaming (connected to
other network)
SIM card missing Charger connected
SIM card error Charger disconnected
Keypad locked Headset connected
Unlocking keypad Headset disconnected
SOS calls Handsfree on
OK (conrmed) Handsfree off
Battery level low Error
Calling Charging (animated)
Incoming call Call ended
Searching Missed call

7
English
Additional functions
Handsfree mode
(qkey)
Activates handsfree mode during a call, which allows you to
speak without holding the phone.
Speak clearly into the microphone at a maximum distance of
1 meter (3 feet).
Use the side keys +/– to adjust the loudspeaker volume.
Press qto return to normal mode.
Note!
The handsfree function allows only one person at a time
to talk. Switching between talk/listen is triggered by the
sound of the person talking. Loud noises (music, etc.) in the
background may interfere with the handsfree function.
Text input
Text (and digits) is entered by pressing the side keys +/–
repeatedly to select characters/digits.
Press the key repeatedly until the desired character is shown.
Wait a few seconds before entering the next character. Use wto
move the cursor within the text. Delete with L.
Note!
Press and hold w(on the side) >4 seconds to enter the main
menu.
Key lock
Press and hold Nto lock/unlock the keypad.
Incoming calls can be answered by pressing qeven if the
keypad is locked. During the call, the keypad is unlocked. When
the call is ended or rejected, the keypad is locked again.
See Settings for key lock options.

8
English
Headset
When a headset is connected, the internal microphone in the
phone is automatically disconnected.
When receiving a call you can use the answer key on the headset
cable to answer and end calls.
Warning!
Using a headset at high volume can damage your hearing.
Adjust the sound volume carefully when using a headset.
When you use the headset, your ability to hear outside
sounds may be affected. Do not use the headset where it
can endanger your safety.
SOS calls 999/112/911999/112/911
As long as the phone is switched on, it is always possible to place
an emergency call by pressing the SOS-key.
Most – but not all – networks accept calls to 999/112/911
without a valid SIM card.
Contact your network operator for more information.

9
English
Emergency Call key
To make an emergency call, press and hold the Emergency Call
key on the back of the phone for 3 seconds, or press it two
times within 1 second.
The phone will send an emergency SMS text message to all
numbers in the Emergency numbers list. The phone will then dial
the rst number on the list. If the call is not answered within 25
seconds, the next number is dialled. Dialling is repeated 3 times
or until the call is answered, or until Lis pressed.
The Emergency Call function must be activated before use. See
Settings on how to activate this function and enter Emergency
Numbers.
Note!
When an emergency call is activated the phone is pre-set to
handsfree mode.
Automatic calls to 999/112/911 are normally not allowed.
Do not save this number in the list of numbers to be called
automatically.
Some private security companies can accept automatic calls
from their clients. Always contact the security company before
programming in its number.

10
English
Settings
Note!
The settings described in this chapter are carried out in
standby mode.
Time & date
Setting the time and date
Press and hold w(on the side) >4 seconds.
Scroll to Time & date using the side keys +/– and press
q.
Select Set time and press q.
Current time setting is shown. Press q.
Enter the time (HH:MM) using the side keys +/– and press
q. Use wto move the cursor. Delete with L.
Select Set date and press q.
Current date setting is shown. Press q.
Enter the date (DD/MM/YYYY) using the side keys +/– and
press q. Use wto move the cursor. Delete with L.
Press Lone or more times to return to stand-by.
Setting the time format
Press and hold w(on the side) >4 seconds.
Scroll to Time & date using the side keys +/– and press q.
Select Time Format and press q.
Select 12 (h) or 24 (h) and press q.
Press Lone or more times to return to stand-by.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
4.
5.

11
English
Setting Auto time on/off
To set the phone to automatically update the time and date
according to the current time zone, select On. (Does only work
with some operators.)
Press and hold w(on the side) >4 seconds.
Scroll to Time & date using the side keys +/– and press q.
Select Auto time and press q.
Select On or Off and press q.
Press Lone or more times to return to stand-by.
User setup
Tone setup
Press and hold w(on the side) >4 seconds.
Scroll to User Setup using the side keys +/– and press q.
Select Tone setup and press q.
Select Ring tone and press q.
Select one of the available tones using the side keys +/–,
the tone will be played.
Press q to conrm, or press Lto discard changes.
Press Lone or more times to return to stand-by.
Volume
Press and hold w(on the side) >4 seconds.
Scroll to User Setup using the side keys +/– and press q.
Select Tone setup and press q.
Scroll to Volume, and press q.
Scroll up/down to change the ring volume.
Press q to conrm, or press Lto discard changes.
Press Lone or more times to return to stand-by.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.

12
English
Changing the language
The default language for the phone menus is determined by the
SIM card. You can change this to any other language supported
by the phone.
Press and hold w(on the side) >4 seconds.
Scroll to User Setup using the side keys +/– and press q.
Scroll to Language, and press q.
Scroll up/down using the side keys +/– to select a language.
Press q to conrm, or press Lto discard changes.
Press Lone or more times to return to stand-by.
Emergency
Emergency Call key
See also Additional functions.
Press and hold w(on the side) >4 seconds.
Scroll to Emergency using the side keys +/– and press q.
Select Activation and press qfor the following settings.
Select one of the following options and press q.
Off Emergency call key disabled.
On Normal
Emergency Call key enabled.
To activate, press and hold key for >3 seconds, or press 2
times within 1 second.
On (3) Emergency Call key enabled.
To activate, press key 3 times within 1 second.
1.
2.
3.
4.
5.
6.
1.
2.
3.

13
English
SMS
Enable/disable the SMS function.
Press and hold w(on the side) >4 seconds.
Scroll to Emergency using the side keys +/– and press q.
Scroll to SMS and press q.
Select Activation and press qfor the following settings.
Select On or Off and press qto enable or disable.
Message
The SMS text message to be sent when the Emergency Call key
is pressed. The phone is pre-programmed with the following
message:
This is an automatically generated alarm message from my
mobile phone, please take appropriate action.
Numbers list
The list of numbers that will be called when the Emergency Call
key is pressed.
Add a new contact in the numbers list
Press and hold w(on the side) >4 seconds.
Scroll to Emergency using the side keys +/– and press
q.
Scroll to Numbers list, and press q.
Select Empty and press q.
Select Name and press q.
Enter the name using the side keys +/–. Use wto move the
cursor within the text. Delete with L.
Press q to conrm.
Scroll to Number, and press q.
Enter the number using the side keys +/–. Use wto move
the cursor. Delete with L.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
9.

14
English
Press q to conrm.
Press Lone or more times to return to stand-by.
Repeat until you have max. 5 emergency numbers.
To edit an existing entry, select it and press q, then select
name/number and press q. Delete with L.
Alarm information
Please read this important safety information before enabling the
Emergency Call function.
Be careful about including numbers with automatic answering
in the call list, as the alarm sequence stops once the call is
answered.
SOS key/112
Important!
The SOS key is pre-programmed to call 112.
As this telephone does not have an ordinary keypad we advise
you to keep this key programmed to call 112.
This way, in case of an emergency it is always possible to call
112 from this phone.
Press and hold w(on the side) >4 seconds.
Scroll to Emergency using the side keys +/– and press q.
Scroll to SOS key and press q.
Select SOS and press q.
SOS is pre-programmed.
Change the name using the side keys +/–, then press qto
conrm. Use wto move the cursor.
Delete with L.
Scroll to 112 using the side keys +/–, and press q.
Enter the number using the side keys +/– and w, then press
q to conrm. Delete with L.
Press Lone or more times to return.
10.
11.
1.
2.
3.
4.
5.
6.
7.
8.

15
English
Speed dial
You can call 4 pre-programmed telephone numbers using the
memory keys A, B, Cand D.
Adding speed dial numbers (keys A-D)
Press and hold w(on the side) >4 seconds.
Scroll to Speed dial using the side keys +/– and press q.
Select Empty and press q.
Select Name and press q.
Enter the name using the side keys +/–, then press qto
conrm. Use wto move the cursor. Delete with L.
Scroll to Number and press q.
Enter the number using the side keys +/–, then press qto
conrm. Use wto move the cursor. Delete with L.
Press Lone or more times to return to stand-by.
Repeat until you have max. 4 contacts.
To edit an existing entry, select it and press q, then select
name/number and press q.
Network setup
Press and hold w(on the side) >4 seconds.
Scroll to Network setup using the side keys +/–
and press q.
Select one of the following options and press q to conrm.
Automatic Network is selected automatically.
Manual
A list of available network operators is displayed
(after a short delay).
Select the desired operator and press q.
Press Lone or more times to return to stand-by.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.

16
English
Security settings
SIM lock
The SIM card is protected with a PIN code (Personal
Identication Number). On this phone there are 3 options to
handle the function.
Press and hold w(on the side) >4 seconds.
Scroll to Security and press q.
Select SIM lock and press q.
Select On, Off or Auto and press q.
Off PIN code deactivated.
Warning, if SIM card is lost/stolen it is unprotected.
On PIN cod activated, you need to enter the PIN code every
time the phone is started.
Auto You do not need to enter the PIN code when the phone
is started, the phone remembers it automatically. If SIM
card is moved to another phone (lost/stolen), the PIN code
needs to be entered to unlock.
Note!
You need to input the current PIN code to activate/deactivate
SIM lock.
Phone lock
Press and hold w(on the side) >4 seconds.
Scroll to Security and press q.
Select Phone lock and press q.
Select On or Off and press qto enable or disable Phone
lock.
Note!
You need to input the current Phone code to change this
setting. The default Phone code is 1234.
1.
2.
3.
4.
1.
2.
3.
4.