Dowell iPack C3.3 User manual

Read Manual carefully before installation to understand product features and safety precautions.
Installer must use insulating tools and wear safety equipment.
Hex key #5
iPack C3.3 Battery Pack Quick Guidance
Warr anty Card
1.Purpose
Thislimitedwarranty(hereinafter“Warranty”)describedbelowappliestotheresidentialapplicationwithDowellBatteryStorage
System suppliedbyShanghaiDowell Technology Co.,Ltd (hereinafter“ DOWELL”) with thetypesiPack C3.3/iPack C6.5
(hereinafter“Products”)toOriginal enduservia theway authorizedbyDOWELL.
2.Warranty Conditi on
2.1.WarrantyPeriod
UnlessotherwisestatedinthisWarranty,thePerformanceWarrantyperiodfortheProductsisTen(10)yearsfromthei nvoicedate.
2.2Performancewarranty
DOWELLwarrantsthattheProductretainseithersixtypercent(60%)of UsableEnergyfor Ten(10) yearsfrom the invoicedate,
orfor aM inimumThroughOutputEnergyin tablebelowwhich is calculatedfrominvoicedate,whichevercomesfirst.
ProductType
UsableEnergy(kWh)
MinimumThroughOutput
Energy(MWh)
iPackC3.3
3
13.5
iPackC6.5
6
27
2.3Capacitymeasurementcondition
Ambienttemperature:25±2
InitialtemperaturedetectedbyBMS/BMS: 25±2
Charging/Dischargingconditions:
Charge:0.2C CC/CV(chargesataconstantvoltageof56.8V ti ll thecurrentreaches2A)
Discharge:dischargeat0.2Ctill thevoltagereaches44.8V,0.2Ccurrent iPackC3.3(12.8A),iPackC6.5(25.6A)
3.Preconditionsfor Warranty
3.1Productshallbeinstalledandservicedexclusivelyby recognizedorpartnerauthorizedbyDOWELL.
3.2Theinstallationof theProductfor theendusershall becompletedwithinmaximum1 monthfrom thedateti tle to theproduct
transferredfrom DOWELLto an original enduser.
3.3Thebatteryinstallationlocationshouldmeettherequirementsof UserManual.
4.Exclusionof War ranty
Thislimitedwarrantydoesnotcoverf ollowing damagedueto:
•Transportdamage;
•Failureof, or damagecausedbyany third-partyproducts.
•Failureto observetheusermanual,theinstallationguide,andthemaintenanceregulations;
•UnauthorizedModifications,changes,orattemptedrepairs;
•Out of thestoragetemperaturerange:-30 to-20 ,+45 to+60 (within7 days);-20 to +45 (within6 months);
• Out of the rangeof operatingenvironmental requirements: -10 to +50 ; humidity range5% to 90% no condensation,
installationaltitudeshouldbelessthan2000meters.
•Noncompliancewiththeapplicablesafetyregulations;
•Defectsornon-conformitieswhicharecausedbynormalwearandtear
•Outsideinfl uenceandforcemajeureincluding but not limited to power failure surges,lightning,flood,f ire, storm,accidental
breakage;
Thislimitedwarrantyshallbe invalid if theobligationsandexclusionsdescribedabovearenotcompliedornot observed.
5.Warranty Restriction
5.1Foranynon-applicablewarrantyclaimwhichindicatesinvalid,costsincurredbyDOWELL or i nstallershallbe coveredby
enduseronlyif this non-applicabilitywasinvisibleto enduseraccordingtogiven circumstances.
5.2ThisWarrantyLetterandaboveremediesshall be exclusiveandreplaceallotherguaranteesandremedies,oralorin writing,
expressedorimplied.No distributor,agentor staffof DOWELLis authorizedtomakeanyrevision,extensionoradditionto the
qualitywarranty.Thelegalityandenforceabilityof remainingclauseshereinshallnot beaffectedor damagedifanyof clauses
hereinisadjudgedtobeillegalor unenforceable.
5.3DOWELLi s not responsibleinanywayf orany claims,damages,losses,expenses,costsorliabilitieswhatsoever(i ncluding,
withoutlimitation,anydi rector indirectdamagesfor lossof profits, businessinterruption)resultingorarisingdirectly or
indirectlyfromyour purchaseoruseof productsanditssystem.
Read Manual carefully before installation to understand product features and safety precautions.
Installer must use insulating tools and wear safety equipment.
Hexkey #5
iPack C3.3 Battery Pack Quick Guidance
WarrantyCard
1.Purpose
Thislimitedwarranty(hereinafter“Warranty”)describedbelowappliestotheresidentialapplicationwithDowellBatteryStorage
SystemsuppliedbyShanghaiDowellTechnologyCo.,Ltd(hereinafter“DOWELL”)withthetypesiPackC3.3/iPackC6.5
(hereinafter“Products”)toOriginalenduserviathewayauthorizedbyDOWELL.
2.WarrantyCondition
2.1.WarrantyPeriod
U
nlessotherwisestatedinthisWarranty,thePerformanceWarrantyperiodfortheProductsisTen(10)yearsfromtheinvoicedate.
2.2Performancewarranty
DOWELLwarrantsthattheProductretainseithersixtypercent(60%)ofUsableEnergyforTen(10)yearsfromtheinvoicedate,
orforaMinimumThroughOutputEnergyintablebelowwhichiscalculatedfrominvoicedate,whichevercomesfirst.
ProductType
UsableEnergy(kWh)
MinimumThroughOutput
Energy(MWh)
iPackC3.3
3
13.5
iPackC6.5
6
27
2.3Capacitymeasurementcondition
Ambienttemperature:25±2
InitialtemperaturedetectedbyBMS/BMS:25±2
Charging/Dischargingconditions:
Charge:0.2CCC/CV(chargesataconstantvoltageof56.8Vtillthecurrentreaches2A)
Discharge:dischargeat0.2Ctillthevoltagereaches44.8V,0.2CcurrentiPackC3.3(12.8A),iPackC6.5(25.6A)
3.PreconditionsforWarranty
3.1ProductshallbeinstalledandservicedexclusivelybyrecognizedorpartnerauthorizedbyDOWELL.
3.2TheinstallationoftheProductfortheendusershallbecompletedwithinmaximum1monthfromthedatetitletotheproduct
transferredfromDOWELLtoanoriginalenduser.
3.3ThebatteryinstallationlocationshouldmeettherequirementsofUserManual.
4.ExclusionofWarranty
Thislimitedwarrantydoesnotcoverfollowingdamagedueto:
•Transportdamage;
•Failureof,ordamagecausedbyanythird-partyproducts.
•Failuretoobservetheusermanual,theinstallationguide,andthemaintenanceregulations;
•UnauthorizedModifications,changes,orattemptedrepairs;
•Outofthestoragetemperaturerange:-30to-20,+45to+60(within7days);-20to+45(within6months);
•Outoftherangeofoperatingenvironmentalrequirements:-10to+50;humidityrange5%to90%nocondensation,
installationaltitudeshouldbelessthan2000meters.
•Noncompliancewiththeapplicablesafetyregulations;
•Defectsornon-conformitieswhicharecausedbynormalwearandtear
•Outsideinfluenceandforcemajeureincludingbutnotlimitedto
powerfailuresurges,lightning,flood,fire,storm,accidental
breakage;
Thislimitedwarrantyshallbeinvalidiftheobligationsandexclusionsdescribedabovearenotcompliedornotobserved.
5.WarrantyRestriction
5.1Foranynon-applicablewarrantyclaimwhichindicatesinvalid,costsincurredbyDOWELLorinstallershallbecoveredby
enduseronlyifthisnon-applicabilitywasinvisibletoenduseraccordingtogivencircumstances.
5.2ThisWarrantyLetterandaboveremediesshallbeexclusiveandreplaceallotherguaranteesandremedies,oralorinwriting,
expressedorimplied.Nodistributor,agentorstaffofDOWELLisauthorizedtomakeanyrevision,extensionoradditiontothe
qualitywarranty.Thelegalityandenforceabilityofremainingclauseshereinshallnotbeaffectedordamagedifanyofclauses
hereinisadjudgedtobeillegalorunenforceable.
5.3DOWELLisnotresp
onsibleinanywayforanyclaims,damages,losses,expenses,costsorliabilitieswhatsoever(including,
withoutlimitation,anydirectorindirectdamagesforlossofprofits,businessinterruption)resultingorarisingdirectlyor
indirectlyfromyourpurchaseoruseofproductsanditssystem.
Item Quantity
iPackC3.3Battery 1pcs
Screwforbracket 4pcs
Rack-mountedBracket 2pcs
Terminator(crystalRJ45plug)2pcs
Manual 1pcs
QuickGuidance 1pcs
WarrantyCard 1pcs
AccessoryList 1pcs
AccessoryList
iPackC3.3StandaloneLithiumIronPhosphateB attery
ResidentialEnergyStorageSystem
UserManual
Date:2021-03-16
FUSED
FUSED
1000VMAX
10A 100mA COM
VΩ
OFF
V
A
A
V
Ω
Hz
%
√× × √
Item Quantity
iPackC3.3 Battery 1pcs
Screwfor bracket 4pcs
Rack-mountedBracket 2pcs
Terminator(crystal RJ45 plug) 2pcs
Manual 1pcs
QuickGuidance 1pcs
WarrantyCard 1pcs
AccessoryList 1pcs
Accessory List
iPack C3.3 Standalone Lithium Iron Phosphate Battery
Residential Energy Storage System
User Manual
FUSED
FUSED
1000VMAX
10A 100mA COM
VΩ
OFF
V
A
A
V
Ω
Hz
%
√× × √

DC Breaker
For details about cautions, refer to Manual.
Connect one Battery
Terminator
T o PCS
T o PCS
To DC Breaker

Wall-mounted installation under Parallel Mode
Junction Box
Battery
No.1
No.3
Connecting plate
No.2
Bracket
No.4
No.5
Expansion Bolt M10*80
No.6
Expansion Tube 6*30
No.7
Screw M4*30
No.8
M5*16 Bolts
No.9
Network Cable A Network Cable B
No.10
No.11 No.12
Negative CablePositive Cable
List
Iteam
iPack C3.3
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
No.11
No.12
1
1
1
2
1
4
8
8
4
1
0
1
1
2
2
1
2
1
4
8
8
10
1
1
2
2
3
3
1
3
2
6
8
8
14
1
2
3
3
4
4
1
3
2
6
8
8
20
1
3
4
4
5
5
1
4
3
8
8
8
24
1
4
5
5
6
6
1
4
3
8
8
8
30
1
5
6
6
7
7
1
5
4
10
8
8
34
1
6
7
7
8
8
1
5
4
10
8
8
40
1
7
8
8

φ12 mm
80-85 mm
Installation of Battery Box
Punch hole on the wall
2. Confirm the quantity and position of fixing holes, 2 holes per column, the hole
spacing is 120mm; column spacing is 484mm, the hole below is at least 350mm from the ground.
1-2 batteries: 2 column holes;
2-4 batteries: 3 column holes;
5-6 batteries: 4 column holes;
7-8 batteries: 5 column holes;
3.This quick guidance is based on 6 batteries.
4. Positioning the hole on the wall, punch hole with impact drill, the diameter
is 12mm, depth is 80-85mm. Press the expansion bolt into the punched hole.
1. Choose a suitable position to place battery on the cement wall or brick wall.
Fix the battery bracket to the wall.
120mm
484mm

Fix the inner battery
Place the inner battery on the battery holder and lock it with M5*16 bolts, torque is 4NM.
Fixing bracket connecting plate
Place connecting plate on the bracket and lock it with M5*16 bolts, torque is 4NM.
Fix the outside battery
Place the outside battery on the battery holder and lock it with M5*16 bolts, torque is 4NM.

Junction Box Installation
Punch 8 holes with a diameter of 6mm on the wall where fixed the junction box, the horizontal
hole spacing is 126mm, the vertical hole spacing is 146mm, the depth is 50-55mm, and place
the plastic expansion tube 6*30 in the hole.
Use M4*30 screws to fix the Junction box to the wall through the 8 fixing holes at the bottom of
the Junction box.
126 45 126 8-φ6
146
80-100
126 45 126 8-φ6
146
350-450
126 45 126 8-φ6
146
200-300
φ6 mm
50-55 mm

Connect the positive / negative inverter cable to the left / right hole of the MCB respectively.
Fix the upper cover of the Junction box to the bottom with self-tapping nails.
Inverter + Inverter - Inverter + Inverter - Inverter + Inverter -
Two Batteries Four Batteries Six Batteries

Battery 1
Battery 2
Battery n
(n≤8）
...
Connect Batteries in Parallel
Battery 1
1
2
3
4
3
Battery n
(n≤8）
...
3
Battery 2
Battery ...
3
To PCS To Battery 1
To Battery 3
To Battery n-1
To Battery 2
DC Breaker
Battery 1
Battery 2
Battery n
Junction box