01
5
Before You Start
40
07 Tuner
During radio status, you can press ST
button on the remote control MONO
mode or STEREO
to select
mode.
Stereo reception is charged when STEREO
appears.
It is switched to MONO mode when MONO
appears.
MO/ST Selector
It is only valid on the remote control.
It is only valid in FM tuning.
6
Switch to MONO compulsively to improve
the listening quality when the signal is .week
Note:
*
*
*
Number Buttons
During radio mode, Number Buttons
(from 1 to 6) can help you yo-
ur favorite station. You can follow the
as below:
store
steps
Press and hold AMS button to receive
stations automatically, and store them in
1 to 6 number respectively.
23
During radio mode, press Number Buttons
to receive the stored stations.
4
When receiving a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
1
2
3
Pressing in the monitor performs the same
function.
Note:
*5
Goto FREQ
2
Press GOTO, and the monitor shows:
FREQ, then press the Number to input the
valid frequency, then the TV program will
be played.
Note:
*It is only valid on the remote control.
*It is only valid when GOTO FREQ is on in
the main menu.
Scanning/Memorizing Stations
Automatically
During radio mode, briefly press AMS
button on the remote control to scan each
stored seconds respectively wh-
ich are Number Buttons (from 1
to . You can press responding N-
umber Buttons or ton when your
desired station is And it starts pl-
aying that station.
station 6
stored in the
6) the cor
AMS but
charged.
23
4
Press and hold AMS ,
automatically memory storing
The radio automatically selects
and has it stored in any one of
Number Buttons (from1 to 6).
button it
will activate the
function. a
station the
4
23
Note:
* The unit can store up to 6 stations for
each band.
* Pressing AMS on the screen also preforms the
same function.
On Screen Display
8
During radio status, press OSD to display
the edition information.
5
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not use in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Do not use CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown in the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown in the picture)
PRECAUTIONS
This unit can play the following discs only:
Type of disc
VCD
12cm
MP3
12cm
CD 12cm
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
12cm
DVD
Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Size of disc
MPEG-4
Sound and moving
pictures
12cm
USB
Sound and moving
pictures
Version 2.0
and less
