CONFIGURATION MANUAL
Video recorders DX Series
Page: 5 Page: 5
DSE SRL - ITALY - WWW.DSE.EU
To the right are the control buttons. At the top you can choose the communication protocol: you can leave all or specify the ONVIF
standard protocol that is supported by this DVR / NVR. Press the Search button to search all onvif camera devices that can be listed in the
left window.
In the lower window shows all channels on the DVR. Only those marked with IPC will accept the connection of IP cameras while others
are reserved for local cameras. Choose one of the IPC DVR canli the bottom window and a network camera from the upper window.
Double click or press ADD. The camera will be connected to the selected channel and its data will appear in the fields below in the
window. As a rule, the DVR is able to set itself consistently all the connection data, but you can edit them manually. In particular you may
need to modify the video stream to be used (if the camera will support more than one) and enter your log in credentials.
Clicking APPLY the configuration will be saved. E 'can move a camera between the digital channels of the NVR with the up / down
arrows and delete it with the DELETE button. The second DELETE button clears all channels configured to start the configuration. If you
want you can quickly load all the cameras in free online channels of DVR QUICK SET button and then make any changes.
With the COPY button, you can copy some data on all cameras without having to manually set (typically useful for setting user
name and password). The configuration of the cameras takes effect after you press the APPLY button.
