DT Research DT395GS Assembly instructions

DT395GS
ENGLISH
Rugged Tablet
BASIC OPERATION GUIDE
DT395GS
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of mobile tablets—the
DT395GS. Featuring a slim yet robust enclosure, the two-pound DT395GS with 8.9”
TFT display is powered by the Intel® Atom™ quad core processor, offering opmal
combinaons of performance and power savings.
The DT395GS is available with Windows® or Android operang system. Each soware
operang system features web browser, client/server compung soware, media player,
accessories, and applicaons support.
PACKAGE CONTENTS
DT395GS with Internal Baery Pack and Bumpers•
AC-DC Power Adapter with Power Cord•
Handstrap•
Basic Operaon Guide•
Major opons, depending on configuraon:
Desktop Charging Cradle with DC-in Power Jack and Ethernet/ USB Ports•
External Baery Power Pack•
Vehicle/ Wall Mount Cradle•
* If your DT395GS contains camera, RFID reader or scanner module, please refer to the Tablet
Modules Basic Operaon Guide for detailed operaon.
ENGLISH 8
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2017, DT Research, Inc. All Rights Reserved. BOGW032817DT395GSENG
Federal Communicaon Commission Interference
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon if this
equipment does cause harmful interference to radio or television recepon, which
can be determined by turning the equipment offand on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separaon between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which•
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Changes or modificaons not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
Operaon on the 5.15-5.25GHz frequency band is restricted to indoor use only.
The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potenal for
harmful interference to co-channel Mobile Satellite Systems.

DT395GS
ENGLISH 2
The DT395GS
Battery status LED
Display mode LED
1
2
43
B
C
D
E
A
Baery and Power Management
The DT395GS is equipped with an internal Li-Ion baery pack and an oponal baery
pack that clips (hot-pluggable) onto the back of the tablet. The period between baery
recharges can be significantly lengthened by pung the tablet into Standby mode
through the Power Buon (see Buons Funcon Table) whenever the tablet is not in
use. Depending on the operang soware, the DT395GS may also be configured to enter
various power-saving modes via the Power Buon or through med entry.
3ENGLISH
Buon Funcons
BUTTON ACTION
Programmable buon without the scanner module
As scanner trigger when equipped with the scanner module
Power on
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts (soware dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
Brightness control buon, 5 levels
Up/ down buon
To adjust the speaker volume
1
2
3
4
Input/ Output Ports
Headset Jack
USB Port
DC Power Input
Camera (oponal)
LAN and 6-pin lockable connector for EIA/RS-232/422/485 (adapter cable required)
A
B
C
D
E

DT395GS
ENGLISH 4
OPERATION
Internal Baery
Warning! !
The Internal baery pack should only be replaced by an authorized DT Research service
representave. Please contact your product and/or service provider for internal baery
replacement service.
Powering ON and OFF
To acvate the DT395GS, push and quickly release the Power Buon. The display will
come on in a few seconds. To put the DT395GS in Standby mode, push and quickly release
the Power Buon. To turn the DT395GS offfor extended storage, power offsafely using
any soware funcon that “shuts down computer”provided in the soware operang
system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use the
AC-DC adapter with the DT395GS when seng up for the first me to fully charge
the baery pack. You may charge the addional baery pack with it aached to the
DT395GS, or with the oponal external baery charger kit.
NOTE:
When the baery pack(s) is (are) charging, the Baery LED will be solid orange, and
when fully charged, the light will be off. If plugging in the AC-DC adapter does not
iniate charging, the baery pack(s) may be substanally drained. Try unplugging/
replugging the AC-DC adapter to the DT395GS a few mes to acvate the charging
process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put in
“Standby”mode while not in use. Pushing briefly on the same buon will wake up
the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe tablet—this
form of hardware shutdown is intended to be a means of recovery from lockups, and
not as normal operaon.
5ENGLISH
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed aer a launch sequence of several seconds. The wireless LAN connecon
may take 10-15 seconds to be established.
Configuring the DT395GS
The tablet may be configured using the ulies and methods dictated by the soware
operang system. The DT395GS should be configurable for various properes such as
user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT395GS is oen delivered with an embedded (user-inaccessible) 802.11 WLAN
adapter equipped with a hidden custom antenna.
T
•hrough the support of typical WLAN adapters, the DT395GS will detect 802.11
access points in the vicinity for you to select the access point of your choice for
connecon.
T
•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT395GS and the ac-
cess points have to match. The SSID is case-sensive and it is recommended that you
enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure access.
W
•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
R
•efer to the access point operang manuals for seng up the 802.11 access points.
Bluetooth
The Bluetooth configuraon applicaon is enabled from the System Tray or from the
Windows Mobility Center. Follow the instrucons and opons provided within the
applicaon to configure and invoke Bluetooth connecvity with the corresponding
peripherals.

DT395GS
Baery LED Status:
Orange indicates that the baery is charging•
When the AC/DC adapter is plugged into the tablet, the Baery LED light will be off•
when fully charged.
Display Mode LED:
When the tablet is in default OS mode, the Display Mode LED will be blue. When in HDMI
mode, the light will be orange.
Precauons
Always exercise care when operang and handling the DT395GS.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus (oponal) to keep the screen clean.
•
A
•void prolonged exposure of the display panel to any strong heat source. Wherever
possible, the DT395GS should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the
•tablet, do NOT use any
AC-DC adapter other than the one provided with the tablet or acquired from the
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe DT395GS and disconnect all power sources. Report the
problem to your device provider immediately.
Never aempt to disassemble the DT395GS, as this will void the warranty.
•
Basic Features
The DT395GS wireless tablet integrates a bright and responsive touch display, 1 USB port,
and embedded networking elements such as wireless LAN or oponal 4G. The DT395GS
is complemented by a suite of accessories, including baery expansion, docking cradles,
and wall/ vehicle mount cradles, for a comprehensive user experience.
A DT395GS typically integrates an 802.11ac wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT395GS does not come with
such a network adapter, please consult your device provider to establish the desired
network connecvity.
ENGLISH 67ENGLISH
USING THE DT395GS
Peripherals Support
Through its USB port, the DT395GS supports a wide range of USB-based peripherals.
These peripherals are applicable for soware installaon, applicaons storage, data
storage, docking or soware recovery and update.
The DT395GS is complemented by an oponal Desktop Cradle or Wall/ Vehicle Mount
Cradle for support, pass-through charging, and connecon to a range of USB peripherals,
including keyboard and mouse. The Cradles offer the following interfaces: a DC-in
port for the AC-DC adapter, an Ethernet port and USB ports. Always seat the DT395GS
securely onto the cradle. The cradle must be powered by the AC-DC adapter for the
Ethernet and USB ports to funcon. The baery packs on the DT395GS may be recharged
by connecng the AC-DC adapter directly to the DC-in port on the DT395GS or through
the DC-in port on the Cradle while the DT395GS is docked.
Remote Management
Depending on soware configuraon, the DT395GS can be centrally managed for asset
monitoring and for soware control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
If the DT395GS comes with a mobile broadband module, please contact your product
and/or service provider for the SIM Card installaon procedures.
To Hold the Tablet
Lehand: grip the leback side of the tablet
with your lehand four index fingers, with thumb
resng on the top of the back side of the tablet and
palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index fingers, with thumb
resng on the top of the back side of the tablet and
palm securely against the back.