DTY Broadmoor OF-1001 User manual

Broadmoor Wood Bench OF-1001
Page 1 of 5
www.DTYStore.com
Broadmoor Wood Bench
Item No. OF-1001
Made in Vietnam
For assistance with assembly, please contact DTYStore.com Customer Satisfaction Center
866-217-8155 . [email protected]

Broadmoor Wood Bench OF-1001
Page 2 of 5
www.DTYStore.com
D. Right Leg Qty: 1
E. Left Leg Qty: 1
Pre-Assembly Instructions
Read all instructions carefully before assembly.
Find a smooth clean area in which to work to avoid damaging your item.
Check that all parts and hardware from the lists are present.
Lay out parts in alphabetical order and hardware in numerical order to make them easier to find when you
are ready to assemble
Wait to dispose of packing material until assembly is complete to avoid accidentally disposing of small
parts or hardware
Tools required: Hex wrench (included) Phillips screwdriver and flathead screwdriver (not included)
Please use caution and care when lifting the product to avoid injury
For ease of assembly two people are recommended
Parts List:
Hardware List:
1. Bolt/Barrel Nut Qty: 4
2. Long Screw (90mm long)
Qty: 4
3. Medium Screw (60mm long)
Qty: 2
4. Short Screw (35mm long) Qty: 4
5. Hex Wrench Qty: 2
A. Back
Qty: 1
B. Seat Cross Bar
Qty: 1
C. Leg Cross Bar
Qty: 1
F. Seat
Qty: 1

Broadmoor Wood Bench OF-1001
Page 3 of 5
www.DTYStore.com
Assembly Instructions:
Step 1
Wait to fully tighten all hardware
until the end of Step 3.
Use two Bolts/Barrel Nuts (1)
and one Long Screw (2) to
loosely attach the Right Side (D)
to the Back (A).
Use one Long Screw (2) to
loosely attach the Front (B) to
the Right Side (D). Be sure the
block is at the bottom.
Use one Medium Screw (3) with
to loosely attach the Cross-
Bar (C) to the Right Leg.
Block should be on the
inside at the bottom
Step 2
Use two Bolts/Barrel Nuts (1), two Long Screws (2), and one Medium Screw (3) with Hex Wrench (5) to
loosely attach the Left Leg (E) to the Back (A), Seat Cross-Bar (B) and Leg Cross-Bar (C).
Item
Drawing
Qty
1
2
2
2
3
1
Item
Drawing
Qty
1
2
2
2
3
1

Broadmoor Wood Bench OF-1001
Page 4 of 5
www.DTYStore.com
Step 3
From the underside of the Seat, use four Short Screws (4) with the Hex Wrench to loosely attach the
Seat to the Sides. Use the Hex Wrench to fully tighten all fasteners from all three steps.
Post-Assembly Instructions:
Periodically check fasteners to be sure they do not loosen over time.
Do not stand on this item.

Broadmoor Wood Bench OF-1001
Page 5 of 5
www.DTYStore.com
Outdoor Furniture Care Instruction:
With the proper care your premium eucalyptus furniture will last up to 25 years or more. For unfinished
furniture, we suggest lightly sanding the surface of the furniture with 150 or 180 grit sandpaper once a year to
remove any fuzziness and any larger splinter causing fibers that occur due to exposure to the elements. Be
sure to sand lightly to retain the natural patina. Furniture with an oil finish should also be treated yearly with a
light coat of wood oil designed for eucalyptus or teak by applying it with a soft cloth. For finished furniture, we
recommend brushing off any loose dirt or debris with a soft brush and wiping down with a mild detergent and
water. We recommend you protect your furniture in the off season by using a using a good quality furniture
cover. It helps keep your furniture clean and protects it from the elements thus minimizing annual
maintenance.