Dualit Contact Toastie Maker Technical specifications

Contact Toastie Maker
Instruction Manual & Guarantee
Dualit Limited County Oak Way Crawley West Sussex RH11 7ST
Telephone: [phone] Facsimile: [phone]
Email: [email protected] Web: www.dualit.com GB0311

KNOW YOUR TOASTIE MAKER
The hardworking stainless steel Contact Toaster makes delicious toasted sealed triangle
sandwiches. The machine is made from satin nish, top grade stainless steel and each plate is
coated with two layers of Non-stick coating. The Hotplates can be turned on individually for
greater economy.
OPERATING INSTRUCTIONS
1. Before rst use remove the screws on handle and t plastic handle over clamp and
screw on tightly.
2. Both sets of plates can be switched on and off independently.
3. Pre-heat sandwich plates for 8 minutes.
4. Lightly butter OUTSIDE of the bread.
5. Place choice of llings between UNBUTTERED INSIDE of the sandwich.
6. Close lid and compress sandwich for 10 seconds.
7. Leave between plates for 70-90 seconds depending on the lling.
8. Remove sandwich with plastic tongs, NOT metal.
9. It is imperative that the sandwich plates are wiped over with a damp cloth after each use
to prevent carbon build up.
10. Never immerse the toastie maker in water.
11. Shut off power when not in use and disconnect from wall socket.
DAILY CLEANING
Ensure that the toastie maker is disconnected from the electricity supply before attempting any
cleaning. Use a damp soapy cloth and NYLON BRUSH to clean ALL signs of grease off the
plates and then wipe clean with a damp cloth.
IT IS IMPERATIVE THAT THE CLEANING INSTRUCTIONS ARE
COMPLIED WITH.
GUARANTEE
In the unlikely event of a fault with your Dualit Contact Toastie maker, providing it is within
one year from date of purchase, please contact the place of purchase or Dualit direct. Keep
your receipt safe, as you will require this as proof of purchase.
POWER SWITCHES
FEET
HANDLES
SANDWICH PLATES