WMIC2BQUICK START GUIDE Wireless Mic System
14-00055-01
Speaker top view connections
AUX OUT TO
OTHER
SPEAKER HALF
DC POWER IN
AUX AUDIO INPUT
(OPTIONAL) FROM
PROJECTOR
For initial setup the speaker system can be assembled and tested on a table top. Then install on the pole.
5. Connect the DC Power cable to the speaker top. Then
plug in the power adapter to the 115VAC. A blue LED will
be visible behind the black speaker grill.
4. Audio Cable connections
Page 1 of 2
4.Connect main speaker section
to other section with audio cable
Optional Audio cable from projec-
tor output to speaker AUX AUDIO
INPUT Projector
4. Connect the Audio cable be-
tween the 2 speaker sections.
Installing on a pole
Place the foam pads on the inside of the speaker.
Connect the 2 halves of the speaker around the
pole using the metal hooks. Insert a wedge to
hold the speaker in place if necessary.
Enlarged
view of foam
pads
