Dunelm Anya 180 User manual

PRODUCT DESCRIPTION
Anya Large Dining Table
30674959
H77xW180xD82.5 cm
1

DEAR CUSTOMER
Thank you for purchasing your new piece of furniture from Dunelm.
We put a lot of effort in the design and construction of our products to ensure they set the standard for
quality, durability and ease of assembly.
If for any reason you feel we haven’t lived up to the high standards we set ourselves, please don’t
hesitate in contacting us on 03451 656565 where our team will be very keen to understand what has
gone wrong and, more importantly, put it right.
The Next Step...
There is no need to feel daunted by the number of parts and fittings in front of you, we have compiled this
straight forward, step-by-step guide to make sure that assembling your furniture is as easy as 1, 2, 3.
Before you begin, we advise that you check that you have everything you need to get started.
IMPORTANT - The first step you need to take is to ensure your safety!
Please take the time to read and understand these instructions before assembling your furniture.
Please keep these instructions for future reference.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from babies and children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and responsibly.
From time to time check that there are no loose fittings on the unit, re-tighten when necessary.
Two people may be required for the assembly of this product.
Once items are part or fully assembled they are not returnable unless faulty.
This item is not for outdoor use – unless stated otherwise.
Some items will be supplied with a wall fixing strap, which we recommend is used to secure the item to
the wall, to prevent a child from accidentally pulling furniture over. Furniture can be dangerous if
incorrectly installed. Assembly should be carried out by a competent person. No liability will be
accepted for damage or injury caused by incorrectly installed or assembled furniture.
Safety and Care Advice
Find a space to spread everything out across the floor before you begin assembling the item.
Lay each panel down on a clean and level area, ideally in the room of intended use, ensuring
Identify all of the fittings, make sure that you have them all prepared and familiarise yourself with each
component, to make things easier when you are putting it all together.
2
The full list of furniture parts, fixtures and fittings, as well as the tools you will need for assembly can be
found on page 3 of this manual.
there is enough room to manoeuver around the item. It is recommended that two people assemble
this product together.

Exploded View
3
1
2
Components Parts supplied
Ref Visual Qty Dimensions
13x180x82.5cm
272x71.5x14.4cm
1
2

Check the pack and make sure you have all the parts listed above. If not, contact the helpline
on 03451 656565 who will be able to help you.
When you are ready and sure that you have the right tools to hand, you will need plenty of
space and a clean dry area for assembly.
Before you start
4
Fixtures and fittings supplied (actual size)
10
mm 20 30 40 50 60 70 80 90 100
Parts & Fittings for Anya Large Dining Table (30674959)
AM8 x 25mm
C
D
Ref QtyDimensions
B
20
20
20
ø14mm 20
ø25mm
ø30mm
Fixtures and fittings supplied (not to scale)
Ref Dimensions Visual Qty
EN/A 1

Ready?
Follow this step-by-step guide
Flip the table top upside down to attach the legs.
5
A
A
A
B
B
B
B
Step 1:
Step 2:
Match the labels e.g “A” on leg to “A” on wooden
the holes on the legs are aligned with the holes on the top.
part and to make sure

6
Fix the legs with bolt (A) through spring washer (B) and Flat washer (C) and (D)
as the picture shows in below. 10 bolts for each leg.
Tighten with supplied allen wrench (E)
Step 3:
A
C
B
A
B
C
D
D
supplied
8 x 25mm
A x 20 ø14mm ø25mm ø30mm
C x 20 D x 20
B x 20
Note: Do not fully tighten until all
fittings are in position.

Care and maintenance
Wood
7
Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners.
From time to time check that there are no loose screws on this unit.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to wrap
or finishes to de-laminate.
Wood is a natural product and each piece is individual. The colour will mellow over time and new
items can vary in shade from items that you have already purchased. We also recommend that any
ornaments, coasters and items placed on the product are periodically moved around to allow the
colour to mellow evenly.
As a natural product, wood is affected by temperature and humidity. We recommend that you avoid
placing the furniture directly in front of heat sources such as radiators or fires as this can cause
cracking or warping over time. Always use matts and coasters to protect the surface when placing
items on the furniture. This will help to protect the finish from heat, liquids or items that might
scratch your furniture.
Remove any spills immediately to avoid staining. Dust regularly with a soft lint free cloth or duster.
The use of abrasive polish or silicon based polishes is not advised as these can affect the polished
finish and joints over time. Always lift your furniture into place, avoid dragging it across the floor as
this can cause damage to joints.