Dunelm Ethan User manual

Ethan 2 Dining Chairs
INSTRUCTIONS
www.dunelm.com
20

03451 656565
www.dunelm.com
Thank you
Dear Customer
Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design and
construction of our products to ensure they set the standard for quality, durability and ease of assembly.
If for any reason you feel we haven’t lived up to the high standards we set ourselves, please don’t hesitate in
contacting us on where our team will be very keen to understand what has gone wrong and,
more importantly, put it right.
The next step...
There is no need to feel daunted by the number of parts
and fittings in front of you, we have compiled this
straight forward, step-by-step guide to make sure that
assembling your furniture is as easy as 1, 2, 3.
Before you begin, we advise that you check that you
have everything you need to get started.
Top p
Find a space to spread everything out across the floor
before you begin assembling the item. Lay each panel
down on a clean and level area, ideally in the room of
intended use, ensuring there is enough room to
manoeuvre around the item. It
is recommended that two people assemble this product
together. The full list of furniture parts, fixtures and
fittings, as well as the tools you will need for assembly
can be found on page 2 and 3 of this manual.
Top p
Identify all of the fittings, make sure that you have them
all prepared and familiarise yourself with each
component, to make things easier when you are putting
it all together.
Safety and care advice
IMPORTANT - The first step you need to take is to ensure
your safety! Please take the time to read and understand
these instructions before assembling your furniture.
Please keep these instructions for future reference.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause
choking if swallowed.
Keep all plastic wrapping materials away from babies and
children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and
responsibly.
From time to time check that there are no loose fittings on
the unit, re-tighten when necessary.
Two people may be required for the assembly of this
product.
Once items are part or fully assembled they are not
returnable unless faulty.
This item is not for outdoor use – unless stated otherwise.
Some items will be supplied with a wall fixing strap, which
we recommend is used to secure the item
to the wall, to prevent a child from accidentally pulling
furniture over.Furniture can be dangerous if
incorrectly installed. Assembly should be carried out
by a competent person. No liability will be accepted
for damage or injury caused by incorrectly installed or
assembled furniture.

www.dunelm.com
Component parts supplied
Ref Parts name
Visu
al Qty
1 Back
Seat
1
2
Leg
1
32

www.dunelm.com
Parts and fittings
Fixtures and fittings
Supplied
Ref
Name
Dimensions
Visual
al
Qty
A Bolt
B
9
Allen Key
(provided)
C
D
E
9
1
2
Adjustable
feet
M6
M6
M6
×55MM
NA
NA
9
Flat Washer
Spring Washer

1
2
3
3

www.dunelm.com
Open dust cover on the bottom of seat by removing velcro.
Attach seat(2) to back(1) and fix through holes using bolts(A)spring washer(B),
flat washer(C).Do not tighten the bolts until they are fixed in the thread hole.Then tighten
all bolts using allen key(E) provided.
Step 1:
DA
BC

A
www.dunelm.com
Step
Step3：
2：Insert the legs(3) into seat corner on the bottom and fix through holes
using bolts(A),spring washer(B),flat washer(C).Then tighten all bolts using
allen key(E) provided
EBC
Use adjustable feet (E) to level the chair on ground.
E

www.dunelm.com
Upholstery care advice
Regular care advice
Vacuum clean your upholstery at least once a
week, dust removal may be improved by pre -
brushing with a socloth.
All reversible cushions should be turned daily and
their posions switched, this will help prevent
excessive soiling and even out wear
Cushion care
It is essenal that all fibre cushions are given a
vigorous plumping by shaking and squeezing to
redistribute the fibre on a daily basis. This will
add air back into the fibres to prevent the fibre
from going flat andlumpy.
General care advice
For items with wooden legs/ feet never place on
a damp floor.
Keep upholstery out of direct sunlight to avoid
discolouring.
Do not place the furniture in a conservatory,
excessively dry or humid condions.
Avoid sharp items such as toys, jean rivets and
buckles coming into contact with the upholstery
as these can easily snag, tear or pull the fabric.
To maintain the appearance and durability of
your suit, restrain children and pet from
climbing and jumping on the sofa.
Leather is a natural product and can display
natural marks and characteriscs such as
healed scars, grain direcons and
creases. These are natural features not faults.
Please dust leather regular and clean with a
damp cloth.
For accidental spills or stains
Don’t rub or scrub with a cloth as this could
damage the fabric and remove the colour.
Don’t use washing up liquid, detergents or
bleach to remove stains.
Don’t soak or allow fabric to become wet.
Do blot or soak up spills immediately using a dry
socolourfast cloth.
Do use specialist upholstery cleaner if needed, always
follow the manufacturer’s instrucons and always
test on a hidden area to check colour fastness. Allow
the test patch to completely dry first. If the fabric
colour is affected, do not use this cleaner on the rest
of your product and consult aspecialist.
Finally, we hope you enjoy your
furniture for many years to come
and thanks again for your
purchase.

across the floor as this can cause damage to joints.
www.dunelm.com
Wood care advice
Wood care advice
Wood is a natural product and each piece is individual.
As a natural product, wood is affected by temperature
and humidity. We recommend that you avoid placing
the furniture directly in front of heat sources such as
radiators or fires as this can cause cracking or warping
over me.
The colour will mellow over me and new items can
vary in shade from items that you have already
purchased.
Strong direct sunlight can affect the colour dramacally,
so try to avoid this as much as possible, we also
recommend that any ornaments, coasters and items
placed on the product are periodically moved around to
allow the colour to mellow evenly.
Always use masand coasters to protect the surface
when placing items on the furniture. This will help to
protect the finish from heat, liquids or items that might
scratch your furniture.
If items are to be placed on the surface of your furniture
and have rubber feet, it is advisable to use mats to
prevent marking.
Always liyour furniture into place, avoid dragging it
across the floor as this can cause damage to joints.
When placing furniture on a wooden or laminate floor,
please ensure that the plasc or felt protectors are
securely fied and in place.
Only clean using a damp cloth and mild detergent, do not
use bleach or abrasive cleaners.
From me to me check that there are no loose screws on
this unit.
Remove any spills immediately to avoid staining. Dust
regularly with a solint free cloth or duster.
The use of abrasive polish or silicon based polishes is not
advised as these can affect the polished finish and joints
over me.
Uneven floors could give the impression that doors of
wall units and wardrobes are out of alignment. Be aware
of this and compensate if necessary by adjusng the
hinges or packing a corner to level the item. Please refer
to the instrucons, included with your furniture, and
adjustaccordingly.
If your furniture becomes stained, scratched, chipped or
suffers other damage, we recommend professional help is
sought to restore it. Please contact our customer services
line for recommended agents.
Always follow fing instrucons carefully and retain
them for future use.