Dunelm Delphi Large Slim Cabinet User manual

www.dunelm.com
Delphi Large Slim Cabinet
INSTRUCTIONS
60 MINS 2 PEOPLE ASSEMBLY MEDIUM DIFFICULTY

2

Ref Dimensions Visual Qty
1299 x 275mm
408 x 238mm
667 x 275mm
190 x 20mm
1299 x 275mm
643 x 262mm
821 x 238mm
1284 x 666mm
102 x 45mm
639 x 411mm
103 x 35mm
1 1
9
11
10
8
7
6
5
4
3
2
1
4
3
1
1
1
1
1
4
2
Component parts supplied
3

Ref Dimensions Visual Qty
Parts and fittings
23456789
1
20
5
2
34
7
16
2
4
4
4
1
3
3
6
3
2
2
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
5.8x30mm
3x14mm
8x50mm
4x22mm
4x50mm
4x24mm
4x14mm
4

23456789
1
Parts and fittings
Ref Dimensions Visual Qty
6
4
30
8
6
R
S
T
U
V
W
X
3.5x14mm
3x16mm
3x12mm
6
8
5

Exploded view
6

Step1:
Step2:
A
A
A
A
X2
A
A
A
A
AA
X4
7
Ax20
Cx2
C
C
C

Step4:
Step3:
8
G
Gx1
X4
B
B
Kx1Jx4 Lx4 Mx4
Bx4
Bx1
K
J
ML

Step5:
9
Q
Gx4 Hx4 Qx4 Tx2 Ux4
H
H
H
H
T
T
U
UU
U
Q
G
Q
G
Q
G
Q
G
100%
Big screw hole faces inside
as AI
ATTENTION

Step6:
10
Gx2 Hx4
H
H
H
H
G
G
80%
Pilot hole on this edge
ATTENTION
Pls make sure the side and
the top/bottom joint align
then tighten all the screws
ATTENTION

Step7:
T
T
UU
U
U
11
Hx4 Ix2 Tx2 Ux4Ex2
H
HH
H
I
E
E
I
100%
Big screw hole faces inside
as AI
ATTENTION 80%

Step8:
12
Q
Dx2 Hx4 Qx2
+
+
-
D
D
Q
Q
H
H
H
H
80%
Pls make sure the side and
the top/bottom joint align
then tighten all the screws
ATTENTION

Step9:
FX34
13
F
Fx34
LABEL

Step10:
14
S
SS
S
Sx8

Step11:
15
X3
WW
W
WW
W
V
X
X
V
N
P
PO
O
R
R
Rx6 Xx6
Wx18 Vx6 Nx3 Ox3 Px3

Step12:
16
W
W
W
W
Wx12

Step13:
17
Wall fittings are not provided
as different wall types require
different raw plugs and screws
Screw to the wall first
Then tighten all the screws
ATTENTION
ATTENTION
+

18
Tip kit instructions
Your item of furniture has been provided with a wall attachment for your safety. It is highly recommended that
this is used to prevent furniture over tipping whichcan cause serious or fatal crushing injuries.
Never allow children to climb or hang on the drawers, doors or shelves.
Place the heaviest items in the lower drawers or shelves.
Never open more than one drawer at a time.
A suitable attachment device is provided with your product; however you will need to source suitable
fixings for your wall.
If in doubt, please consult a qualified tradesperson.
Two different wall fixings types could be provided with our furniture, the correct type is in this bag to suit
your furniture. Further information below.
Please ensure that the plastic bracket is screwed
into the wall as the image shows.
Wall screws and plugs are not provided however
please use our guide to helpyou choose the
correct screw / plug type for your wall.
When drilling the walls, always ensure there are
no hidden wires or pipes.
Please ensure that the Metal L bracket is screwed
into the wall at the image shows, the bracket
location may vary on unit location and personal
preference.
Wall screws and plugs are not provided however
please use our guide to help you choose the
correct screw / plug type for your wall.
When drilling the walls, always ensure there are
no hidden wires or pipes.
Plastic cable tie image Metal L bracket image

19
This wall fixing is provided for your safety and
we recommend that once in position the unit is
secured to the wall for extra stability.
Wall fixings may vary depending on item of
furniture purchased.
Wall fittings are not providedas different wall
types require different raw plugs and screws.
Please ensure that you use fittings that are
suitable for your wall type (see next page for a
general guide).
Please ensure that the head of the screws used
has a diameter greater than the diameter of the
hole on the wall fixing and that the fixing is safe
and secure before using.
When drilling into the walls, always ensure there
are no hidden wires or pipes.
If you are unsure, we recommend you consult a
qualified tradesperson.
Wall fixings

20
Wall fixings
Step by step
Important
When drilling into walls always check there are no hidden wires or pipes
etc. Make sure that the screws and wall plugs being used are suitable for
supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints
1. General Rule; Always use a larger screw and wall plug if you are not sure.
2. Ensure you use the recommended drill bit to match the wall plug and hole size.
3. Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the plug is fitting below the
ceramic tile to avoid splitting or cracking.
5. Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types of Walls
You can use one of the following
types of wall plug if your walls
are made of brick, breeze
block, concrete, stone, wood
or plastic board.
1. STANDARD Wall Plug
General wall materials
These come in various sizes
and are made from plastic or
sometimes wood fibre.
2. GENERAL PURPOSE
Wall Plug
Aerated/Breeze block
Generally aerated blocks should
not be used to support heavy
loads, use a specialist fitting in this
case. For light loads, a General
Purpose Plug can be used.
3. SHIELD ANCHOR
Wall Plug
Heavy loads
For use with heavier loads such
as TV & Hi-fi Speakers and
Satellite Dishes etc.
6. HAMMER FIXING
Wall Plug
For use with walls stuck with
plaster board. The hammer
fixing allows it to be fixed to
the wall rather than the plaster
board. Always check the fixing
is secure to the retainingwall.
4. CAVITY FIXING
Wall Plug
For use with plaster board
partitions or hollow wooden
doors.
5. CAVITY FIXING HEAVY
DUTY Wall Plug
For use with plaster board
partitions or hollow wooden
doors.
Care and
Maintenance
Safety
Always check the tting and
location to ensure your safety in
and around the home.
Fitting
From time to time check the
tting to ensure the wall plugs
or screws do not become loose.