Dunelm Oliver Wide TV Unit User manual

Oliver Wide TV Unit
INSTRUCTIONS
www.dunelm.com

Thank you
Dear Customer
Thankyou for purchasing your new piece offurniture from Dunelm. We put a lot of effort in the
design andconstruction of our products to ensure they set the standard for quality, durability and
ease of assembly.
If for any reason you feelwe haven’t lived up to the high standards we set ourselves,please don’t
hesitate in contacting us on 03451 656565where our team will be very keen to understand what
has gone wrong and,more importantly, putit right.
The next step...
There is no need to feeldaunted by the number of
parts and fittings in front of you, we have compiled
this straight forward, step-by-step guide to make sure
that assembling your furniture is as easy as 1, 2, 3,4.
Before youbegin, we advise that you check that you
have everything you need to get started.
Top tip
Find a space tospread everything out across the
floor before youbegin assembling the item. Lay
each paneldownona clean and level area, ideally
in the room of intended use,ensuring there is
enough room to manoeuvre around the item. It
is recommended that two people assemble this
product together. The full list offurniture parts,
fixtures and fittings,as well as the tools you willneed
forassembly can be found on page 2 and 3 of this
manual.
Top tip
Identify all ofthe fittings, make sure that you have
them all prepared and familiarise yourself with each
component,to make things easier whenyou are
putting it alltogether.
Safety and care advice
IMPORTANT- The first stepyou need to take is to
ensure your safety! Please take the time to read and
understand these instructions before assembling
your furniture.
Please keepthese instructions for future reference.
Keep children and animals away from the assembly
area. This furniture contains small parts that could
cause choking ifswallowed.
Keep all plastic wrapping materialsaway from babies
and children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully
and responsibly.
From time totime checkthat there are no loose
fittings on the unit, re-tighten when necessary.
Two people may be required for the assembly of
this product.
Once items are part or fully assembled they are not
returnable unless faulty.
This item is not for outdoor use – unless stated
otherwise.
Some items will be supplied with a wall fixing strap,
which we recommend is used tosecure the item
to the wall, to prevent a child from accidentally
pulling furniture over.Furniture can be dangerous if
incorrectly installed. Assembly should becarried out
by a competent person. No liability willbeaccepted
for damage or injury caused by incorrectly installed
or assembled furniture.
www.dunelm.com

www.dunelm.com
Ref Dimensions
1
Visual Qty
2
3
4
5
6
7
8
117x36.1cm 1
1
1
1
1
1
1
2
38x32.6cm
67x30.9cm
34.5x29.4cm
66.6x1.5cm
117x36.1cm
118x30.4cm
Component parts supplied
Ref Dimensions
9
Visual Qty
10
11
12
13
14
15
49.6x32.3cm 1
1
1
1
1
1
1
61.5x11.5cm
33x11.5cm
31.5x4cm
62.4x32.3cm
66.4x18.9cm
16 1
48.4x30.9cm
17 2
31x18cm
18 1
103x7.5cm
33x11.5cm38x32.6cm

Parts and fittings
www.dunelm.com
Fixtures and fittings
supplied(actual size)
Re Dimensions Qty
A
B
C
D
18
7
22
2
8X30mm
5X40mm
3.5X14mm
4X19mm
E14
6X14mm
10mm 20 4030 50 60 70 9080 100 110 130120
Fixtures and fittings supplied(not to scale)
Re Dimensions Qty
F23
N/A
Visual
G23
N/A
Re Dimensions Qty
L1
N/A
Visual
M6
N/A
N4
N/A
O1
N/A
H1
N/A
I4
N/A
J2
N/A
K2
N/A

www.dunelm.com
Exploded view
1
2
3
4
5
6
7
8
9
11
12
13
14
15
17 18
16
10
x2

www.dunelm.com
Step 1:
H
=
CL
+++
CR DL DR
CL A
E
5
E E
CL
Need to assemble drawer runner in the
correct pilot hole as the diagram indicates.
C x 6
H x 1
E
CR
3
EE E
CR
Need to assemble drawer runner in the
correct pilot hole as the diagram indicates.

www.dunelm.com
Step 2:
A
A
A x 18 F x 18
F
F
F
A
A
A
1
2
4
6
F
A
A
5
F
3
A
A
7
Shoulder
NO GAP
CAM-LOCK
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten(see example below)
Panel Panel

www.dunelm.com
Step 4:
Step 3:
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
G
G
G x 4
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
G x 2
1
1
5
6

G x 2
www.dunelm.com
Step 6:
Step 5:
B
B x 2
G
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
4
5
5
7

www.dunelm.com
Step 8:
Step 7:
8
G x 6
Please pay attention to the direction
of the back panel!
O x 1
G
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
7
7
3
3

www.dunelm.com
Step 10:
Step 9:
L
E
E
E x 4 L x 1
G
G x 4
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
2
Do not tighten the screw until you attach the metal frame onto the bottom panel.
17
18
17

I x 4
www.dunelm.com
Step 12:
Step 11:
I
I
E x 10 L x 1
L
E
16

Step 14:
C x 8
C
D
K
C
J
www.dunelm.com
Step 13:
C x 4 D x 1 J x 2 K x 1
9
9

B
www.dunelm.com
Step 15:
Step 16:
B x 5
F x 5 G x 5
D x 1 K x 1
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
10
11
12
13
14
N x 4
P
G
K
D
F
15

C x 4 H x 1
www.dunelm.com
Step 17:
Step 18:
C
C
DR
DR
DL

www.dunelm.com
Step 19:
M
X
Y
M x 6

www.dunelm.com

www.dunelm.com
Assembly instructions
1200
664
485
615
380
348
314
505
120
160
180
95
670

Wood care advice
Wood care advice
Wood is a natural product and each piece is
individual.
As a natural product, wood is affected by
temperature and humidity. We recommend that
you avoid placing the furniture directly in front of
heat sources such as radiators or fires as this can
cause cracking or warping over time.
The colour willmellow over time and new items
can vary in shade from items that you have already
purchased.
Strong direct sunlight can affect the colour
dramatically, so try to avoid this as much as
possible,we also recommend that any ornaments,
coasters and items placed on the product are
periodically moved around to allow the colour to
mellow evenly.
Always use matts and coasters to protect the
surface when placing items on the furniture. This
will helpto protect the finish from heat, liquids or
items that might scratch your furniture.
If items are to be placed on the surface of your
furniture and have rubber feet, it is advisable to
use mats to prevent marking.
Always lift your furniture into place,avoid
dragging it across the floor as this can cause
damage tojoints.
When placing furniture on a wooden or laminate
floor, please ensure that the plastic or felt
protectors are securely fitted andin place.
Only clean usinga damp cloth and mild detergent,
do not use bleach or abrasive cleaners.
From time to time check that there are no loose
screws on this unit.
Remove any spills immediately to avoid staining.
Dust regularly with a soft lint free cloth orduster.
The use of abrasive polish or silicon based polishes is
not advised as these can affect the polished finish and
joints over time.
Unevenfloors could give the impression that doors
of wall units and wardrobes are outof alignment.
Be aware of this and compensate if necessary by
adjusting the hinges or packing a corner to level the
item. Please refer tothe instructions, included with
your furniture, and adjust accordingly.
If your furniture becomes stained, scratched, chipped
or suffers other damage, we recommend professional
help is sought to restore it. Please contactour
customer services line for recommended agents.
Always follow fitting instructions carefully and retain
them for future use.
www.dunelm.com