Dunelm Lynton Gents Wardrobe User manual

Lynton Gents Wardrobe
L97 x W56x H180.5 cm
White

Thank you for purchasing your new piece of furniture from Dunelm.
We put a lot of effort in the design and construction of our products to ensure they set the standard for
quality, durability and ease of assembly.
If for any reason you feel we haven’ t lived up to the high standards we set ourselves, please don’ t
hesitate in contacting us on 03451 656565 where our team will be very keen to understand what has
gone wrong and, more importantly, put it right.
The Next Step...
Before you begin, we advise that you check that you have everything you need to get started.
DEAR CUSTOMER
TOP TIP
Lay each panel down on a clean and level area, ideally in the room of intended use, ensuring there is
enough room to manoeuvre around the item. It is recommended that two people assemble this
product together.
TOP TIP
component, to make things easier when you are putting it all together.
Safety and Care Advice
IMPORTANT -
Please take the time to read and understand these instructions before assembling your furniture.
Please keep these instructions for future reference.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from babies and children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and responsibly.
Two people may be required for the assembly of this product.
Once items are part or fully assembled they are not returnable unless faulty.
This item is not for outdoor use – unless stated otherwise.
to the wall, to prevent a child from accidentally pulling furniture over.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent
person. No liability will be accepted for damage or injury caused by incorrectly installed or
assembled furniture.
1
There is no need to feel daunted by the number of parts and fittings in front of you,we have
compiled this straight forward, step-by-step guide to make sure that assembling your furniture is as
easy as 1, 2, 3.
The full list of furniture parts,fixtures and fittings,as well as the tools you ill need for assembly
can be found on page 2,3,4 and 5 of this manual.

Panel - exploded view
Panels - plan view
2
9
1
2
3
4
5
6
7
8
10
11
12 13
14
15
17
14
16
Left side panel
Top panel
12
2
Parts & fittings for the Lynton Gents Wardrobe (30464177)
19
18

Panels - plan view
3
9
Right side panel Back crossing bar
Upper crossing bar Shelf
Back crossing bar Drawer back panel
9Drawer bottom panel Drawer left panel
9
78
9
34
56
10
Parts & fittings for the Lynton Gents Wardrobe (30464177)

Panels - plan view
4
9
Left back panel
Drawer right panel
Drawer font panel 12
11
15
Drawer bottom support
12
13
Door x 2
14
Right back panel
16
17
Lower crossing bar
Parts & fittings for the Lynton Gents Wardrobe (30464177)
18
Back panel clip
19
Hanging rail

Fittings
Tools Required
Before you start
Check the pack and make sure you have all the parts listed above.
If not, contact the helpline on 03451 656565 who will be able to help you.
When you are ready and sure that you have the right tools to hand, you will need plenty of space and a clean
dry area for assembly.
5
ABC D E
F G HJK
Phillips screwdriver (medium) Flatblade scresdriver(medium)
Metal cam x 19 30mm Wooden
dowel x 16
Ø5x40mm Screw
x 9
Metal cam pin x 19
Handle x 4
Slide x 2 21mm Screw x 4
Ø3.5x14mm Screw
x 26
Ø3x16mm Screw
x 20
Parts & fittings for the Lynton Gents Wardrobe (30464177)
L
Door stop x 1
M
Hanging rail bracket
x 2
N
Hanging x 6
Anti-topple device
x 2

lm.c
6
Ready?
Follow this step-by-step guide
G
G1
G2
1
G1
E
G1
G1
G1
E
M
M
M
3
2
E x 10 G1 x 2 M x 2

7
2
B
B
B
B
C
C
3
2
B x 19 C x 4

I
C
CC
I
8
3
C
C
C
E
L
7
4
6
C
C
C
C
C
C
C
C
C
C
L55
17
C x 12 E x 2 L x 1

lm
9
4
5
B
A
B
B
A
3
3
4
4
5
5
2
6
6
7
7
B
17
17
A x 7
A x 7

2
3
1
D
D
7
17
lm.
10
6
7
E
K
E x 2 K x 2
D x 4

lm.
11
8
F
2
6
16
7
1
17
F x 8

lm.
12
9
10
15
15
16
16
2
F
15
16
2
17
17
F x 12
18

lm.
13
11
x2
N
N
N
N
E
6
2
17
12
E x 12 N x 6
19

lm.
14
14
14
N
E
H
J
12
8
9
11
D
D10
8
9
11
13
14
E x 12 H x 2 J x 2
D x 5

B
A
G2
lm.
15
J
H
J
A
A
A
A
13
8
9
11
13
G2
G2
E
G2
15
16
H
A x 5 H x 2 J x 2
E x 6 G2 x 2

lm.
16
17
13

18
lm.
17

dunelm.com
Wall Fixings
18
and we recommend that once in position the unit is
secured to the wall for extra stability.
● Please ensure that the head of the screws used has a diameter greater than the diameter of the hole on
● When drilling into the walls, always ensure there are no hidden wires or pipes.
Unit
Wall

dunelm.com
Wall Fixings
Follow this step-by-step guide
IMPORTANT:
When drilling into walls always check there are no hidden wires or
pipes etc. Make sure that the screws and wall plugs being used are
suitable for supporting your unit. Consult a quali ed tradesperson
if you are unsure.
HINTS
1. General Rule; Always use a larger screw and wall plug if you are not sure.
2. Ensure you use the recommended drill bit to match the wall plug and hole size.
3. Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the plug is tting below
the ceramic title to avoid splitting or cracking.
5. Ensure wall plugs are well tted and are a tight t in the drilled hole.
Types of Walls
You can use one of the
following types of wall plug if
your walls are made of brick,
breeze block, concrete, stone,
wood or plastic board.
1. STANDARD Wall Plug
General wall materials
2. GENERAL PURPOSE
Wall Plug
Aerated/Breeze block
3. SHIELD ANCHOR
Wall Plug
Heavy loads
6. HAMMER FIXING
Wall Plug
4. CAVITY FIXING
Wall Plug
5. CAVITY FIXING HEAVY
DUTY Wall Plug
These come in various sizes
and are made from plastic or
sometimes wood bre.
Generally aerated blocks
should not be used to support
heavy loads, use a specialist
tting in this case. For light
loads, a General Purpose Plug
can be used.
For use with heavier loads such
Satellite Dishes etc.
For use with walls stuck with
plaster board. The hammer
xing allows it to be xed to
the wall rather than the plaster
board. Always check the xing
is secure to the retaining wall.
For use with plaster board
partitions or hollow
wooden doors.
For use with plaster board
partitions or hollow
wooden doors.
CARE & MAINTENANCE
Safety
Always check the tting and
location to ensure your safety
in and around the home.
Fitting
From time to time check the
tting to ensure the wall plugs
or screws do not become loose.
19