Dux 8008 User manual

DUX 8008
ASSEMBLY INSTRUCTIONS
DUX, DUXIANA and DUX Pascal-systems are registered
trademark owed by Dux Design AB 2012.
Printed 2021.02.01
dux.com

DUX PASCAL-SYSTEM
CONFIGURE PASCAL-SYSTEM
ASSEMBLING
The Pascal System consists of three or
six interchangeable spring cassettes
of varying densities and tension.
Designed to provide three support zones –
shoulders, hips, legs – each cassette
is selected to match your body size and
weight for individually customized
comfort.
Common conguration is as follows:
SOFT – at the head, allowing your
shoulders to sink into the bed.
MEDIUM – in the middle, allowing hips
to sink down in the bed.
FIRM – at the foot, allowing some
elevation for your legs and feet.
I. ATTACH THE LEGS
Attach the legs and place the bases
close together.
II. ADD THE SPRINGTOP
FIRM MEDIUM SOFT
dux.com DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
1

FIRM SOFT
PULL AND TURN CLOCKWISE
III. OPEN THE BED
Open the bed and fold the top over.
IV. ARRANGE THE CASSETTES
Arrange the cassettes according to your
preference.
V. FOLD THE TOP BACK OVER
Fold the top back over and zip the
bed closed.
VI. ADJUST THE LUMBAR SUPPORT
To adjust the lumbar support, use
the included crank. To increase
the rmness, turn the crank clockwise.
DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
dux.com2