Dux Alicia Sofa User manual

DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2013.
Printed 2019.10.01
dux.com
2
ALICIA SOFA
ASSEMBLY INSTRUCTIONS
DUX, DUXIANA and DUX Pascal-systems are registered
trademark owed by Dux Design AB 2012.
Printed 2021.02.01
dux.com

dux.com DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
1
TOOLS NEEDED
Allen key (included)
Ratcheting Hex
Wrench (not included)
We would like to advise to not assemble the sofa alone, always get help!
Please make sure you use proper tools and safety equipments.
Hex Wrench Spanner
(not included)
M6x60 Hex Head Bolt
(included)
M6 Washer (included)
not included
M6x25 Button-Head
Bolt (included)
Armrest 610
Note that some components may not be applicable
depending that sofa conguration that you have chosen.
Armrest 960 Backrest
Integrated Table Integrated Table 610 Integrated Table 960
SOFA COMPONENTS

DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
dux.com dux.com DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
32
SOFA CONFIGURATION – EXAMPLES
SOFA ASSEMBLY – LEGS
Depending the sofa combinations that was chosen, some of the screw holes may not be used!
Unpack the Seat Base + Seat Cushion
and remove the Seat Cushion.
Flip Sofa upside down.
Place legs according the chosen sofa
conguration.
Tight the M6x25 Bolt + Washer in
the correspondent holes. Corner Legs
should have 5 Washers + Bolts
(each leg). Please make sure the legs are
aligned with the holes in the
metal plate and centered in the corner.
Back/Front Leg
Seat Base Seat Cushion
Hidden/Connector Leg Corner Leg

DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
dux.com dux.com DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
54
Position the bolts on the backrest in Seat
Base holes and lightly screw them.
Please make sure that DUX label it’s
always on left hand seeing from the front
of the sofa.
Tighten the bolts denitely, for that use
a 10mm Ratcheting Hex Wrench or a Drill
with a Hex Wrench Socket.
Be careful to not mill the bolt! After
tighten all bolts close the Backrest zipper.
Hidden/Corner Leg Back Leg
SOFA ASSEMBLY – LEGS JOINING SOFA
SOFA ASSEMBLY – BACKREST
To assemble two sofa modules, it will
be needed a Back and a Hidden/
Connector Leg. Align the Back Leg and
tight the M6x25 Bolt + Washer.
Same for the Hidden Leg.
Please make sure the legs are
centered and that the correspondent
screw holes are used!
Unpack the Backrest and open the
bottom zipper. Insert the M6x60 Head
Bolt + Washer in Backrest
(6 per Backrest).
Flip Sofa again, to its right position.

DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
dux.com6
SOFA ASSEMBLY – CUSHIONS
Lay Seat Cushion aligned in Seat Base.
Align both by middle stitching.
Place Backrest cushions according
the chosen sofa conguration
and decorate with deco cushions.
Deco cushions – The more the better!
ENJOY YOUR NEW SOFA!