DVA BLUE ELECTRIC 36111 User manual

MANUAL
Multi-hybrid Worklight - Article No. 36111, 36562 - 20W

Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
1. Advantage
1.1 Power supply---7 brands of tool baeries
1.2 Hook & Magnet

1.3 Angle Adjustable
1.4 USB Output

Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
2. Introduction
2.1 Version 36562 and 36111

A
2.2 Instructions
2.2.1 Baery installation
DEWALT Baery(14.4V or 18V)
MILWAUKEE Baery(14.4V or 18V)
METABO Baery(14.4V or 18V)
HIKOKI Baery(14.4V-18V)
MAKITA Baery(14.4V-18V)
BOSCH Baery(14.4V-18V)
1.1 Pull up the “DE” .
1.2 Press the buons on both sides
to make sure “DE/MI” is up.
1.3 Slide the baery into the adaptor.
1.1 Pull up the “MI”.
1.2 Press the buons on both sides
to make sure “DE/MI” is up.
1.3 Slide the baery into the adaptor.
1.1 Pull up the “ME”.
1.2 Make sure “DE/MI” is down.
1.3 Slide the baery into the adaptor.
1.Pull up the “H”.
2.Slide the baery into the adaptor.
1.Pull up the “M”.
2.Slide the baery into the adaptor.
1. Pull up the “B”.
2. Slide the baery into the adaptor.
1. Pull up the “P”.
2. Push the component “A” on both side.
3. Press the baery into the adaptor.
PANASONIC Baery(14.4V-18V)

△
△
Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
Suit for 18V battery 5V 1A
Suit for 14.4V battery
14.4V18V
USB
Red indicator is for 18V.
Green indicator is for 14.4V.
Voltage Switch
14.4V 18V
Adapter has a memory for the baery voltage.
That means when switching to 14.4V, the default
voltage memory will be at 14.4V.
When the baery is inserted into the light, the indicator is on for 5s.
18V Baery
Press Voltage Switch.
Please make sure the voltage indicator is red.
14.4V Baery
Press Voltage Switch.
Please make sure the voltage indicator is green.
2.2.2 Choose the right baery voltage
2.2.3 Press the switch to turn on the light

3. Specifications
4. Working Place
Model NO. 36562
Tool baery(14.4V-18V):
HITACHI/MAKITA/BOSCH/PANASONIC
Tool baery(14.4V-18V):
METABO/DEWALT/MILWAUKEE
20W
2200lm
4000K
Depends on tool baery
25%/50%/100%/OFF
-10 C ~ 45 C
0 C~ 40C (Capacity 80%) Recommended long-term: 15 C~ 25C
120 degree
70
IP 65
36111
Power
Baery
Lumens
RA
CCT, kelvin
IP rating
Operating time
Operating mode
Operations temperature
Storage temperature
Beam Angle
Construction Site Indoor Illumination Automotive repair

8 July 2021
5. Say Instructions
5.1 General
• Ensure the worklight is correctly charged before initial use.
• DO NOT cover or block the lens during use
• DO NOT use the light directly towards the eyes of a person or an
animal.
• DO NOT handle or move the worklight while it is being charged
• DO NOT use the work light if you suspect that the baery or the
worklight casing is damaged
5.2 Electrical safety
• Check that cables are protected against short circuits and overloads.
• Check that the Volt indicated on the charger socket corresponds to
the power supply used.
Fully unroll the cable between the charger and the work light.
• Do not use other types of chargers with this product.
• Use only the appropriate connectors.
• Do not aempt to disconnect the charger connector.
• Do not use the charger plug to charge or power other products.
5.3 Maintenance
• Do not clean the work light with detergents.
• Store the work light in a clean, dry place when not in use