Dynafold Paper Folder PF-330 User manual

DYNAFOLD USA, INC
Model 330
OPERATION MANUAL
DYNAFOLD USA, INC.
Buena Park, Ca
Read this Operation Manual before using the
machine. Keep the Operation Manual with care in a
fixed storage place so that it may be available
whenever required.

- 2 -

- 3 -

- 4 -

- 5 -
(2) Designation and Functions of Operation Panel

- 6 -
(3) Parts Names

- 7 -
(4) Preparations
1. Installation of the following plates:
2. Preparation of Paper Feed Tray:
First, put both upper and lower folding plates
in place and lock them firmly. (Picture 4)
Insert the connector on coaxial cable into the
plug located on the inner wall of the rear cover
(Picture 5, 6 & 7) and fasten the screw.
If standard paper size is used, there is a scale on the auxiliary paper feed tray. Align the paper with
the scale (Picture 8) and fit the paper guides to the paper width (Picture 9) and tighten the knurled
screw (Picture 10).
Picture 4
Picture 5 Picture 6 Picture 7
If non-standard paper is used, put the paper on the center and fit the paper guides to the paper width
then tighten the knurled screw.
Picture 8 Picture 9 Picture 10

- 8 -
Picture 11

- 9 -
Picture 12
Slide Plate

- 10 -
Picture 13
Picture 14
Picture 15
Picture 16