Dynasty Fireplaces Allegro DY-BFM Series User manual

Allegro DY-BFM Series
Installation Guide
DYNASTY FIREPLACES
FLUSH-MOUNT INSTALLATION

WARNING & CAUTION PAGE:
PLEASE NOTE:
• Power on and test the electric fireplace unit prior to installation
• This is a general installation guide - local building codes may
vary. Consult local building codes prior to installation.
©2022 Dynasty Fireplaces
Improper installation, adjustment, alteration, service or maintenance can
cause injury or property damage. Refer to the product user manual. For
assistance or additional information, consult a qualified installer.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the
heater.
DO NOT run power cord under carpeting. DO NOT cover power cord
with throw rugs, runners, or similar coverings. DO NOT route power cord
under furniture or appliances. Arrange power cord away from traffic area,
and where it will not be tripped over.
ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use
with an extension cord or relocatable power tap (outlet/power strip).
NEVER plug this heater into an outlet that is old, cracked, or has any
loose wires or connections. Plugging this heater into a faulty outlet could
result in electric arcing within the outlet that could cause the outlet to
overheat or catch fire

Allegro Series Installation Guide
● With the front trim removed, ensure the
magnets and holders are removed from
the top and bottom trim

Allegro Series Installation Guide
●Unscrew the bolt and hinge holding the
front glass.
To remove the glass, use the hinges to hook
onto the glass to pull it forward, or slowly tip
the fireplace forward to catch the glass.
Safely set aside glass for later

Allegro Series Installation Guide
●The optional four rubber feet may be
removed for more stability

1. Create the framing according to the dimensions below
Framing Dimensions
Model DY-BFM58 DY-BFM68 DY-BFM76 DY-BFM82
X
486 mm. 486 mm. 486 mm. 486 mm.
19 ⅛ in. 19 ⅛ in. 19 ⅛ in. 19 ⅛ in.
Y
1369 mm 1623 mm 1826 mm. 1978 mm.
53 ⅞ in. 63 ⅞ in. 71 ⅞ in. 77 ⅞ in.
Depth
203 mm. 203 mm. 203 mm. 203 mm.
8 in. 8 in. 8 in. 8 in.
STEP 1
Allegro Series Installation Guide

●Apply finishing around the opening area, and
ensure opening dimensions remain the
same.
STEP 2
Allegro Series Installation Guide

●Insert fireplace into the opening, and ensure
the thin edges on the left and right are
aligned flush with the surface of the
finishing material.
STEP 3
Allegro Series Installation Guide

●Insert fireplace into the opening - ensure the
thin edges on the left and right are aligned
flush with the surface of the finishing
material.
STEP 4
Allegro Series Installation Guide

●Secure the fireplace using the provided
ST4x12 metal screws, insert the screws into
the opening on the top left and right of the
side panels. Ensure side panels do not
deform when screws are inserted.
STEP 5
Allegro Series Installation Guide