Dynasty Fireplaces Melody Series User manual

Installation Guide for
Dynasty Fireplaces
Melody Series (DY-BTS)
DYNASTY FIREPLACES

WARNING & CAUTION PAGE:
PLEASE NOTE:
• Power on and test the electric fireplace unit prior to installation
• This is a general installation guide - local building codes may
vary. Consult local building codes prior to installation.
©2022 Dynasty Fireplaces
Improper installation, adjustment, alteration, service or maintenance can
cause injury or property damage. Refer to the product user manual. For
assistance or additional information, consult a qualified installer.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the
heater.
DO NOT run power cord under carpeting. DO NOT cover power cord
with throw rugs, runners, or similar coverings. DO NOT route power cord
under furniture or appliances. Arrange power cord away from traffic area,
and where it will not be tripped over.
ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use
with an extension cord or relocatable power tap (outlet/power strip).
NEVER plug this heater into an outlet that is old, cracked, or has any
loose wires or connections. Plugging this heater into a faulty outlet could
result in electric arcing within the outlet that could cause the outlet to
overheat or catch fire

Melody Series Installation Guide
Determine the installation configuration of the fireplace
1) Single-sided (front of fireplace open)
2) Double-sided (front, and left or right of fireplace open)
3) Three-sided (front, left, and right of fireplace open)
STEP 1

Melody Series Installation Guide
For a single-sided installation, the left and right sides of the
opening can be enclosed
STEP 1.1 - Framing for single-sided installation
Framing Dimensions
Model Y X Depth
DY-BTS35 33 ½ in. 29 ½ in. 12 ½ in.
DY-BTS40 39 ¾ in. 25 ⅜ in. 12 ½ in.
DY-BTS60 63 ⅜ in. 25 ⅜ in. 12 ½ in.

Melody Series Installation Guide
For a two-sided installation, the left or right sides of the opening
can be enclosed. Attach the edging strips to the exposed side
only.
STEP 1.2 - Framing for two-sided installation
Framing Dimensions
Model W H D
DY-BTS35 33 ½ in. 29 ½ in. 12 ½ in.
DY-BTS40 39 ¾ in. 25 ⅜ in. 12 ½ in.
DY-BTS60 63 ⅜ in. 25 ⅜ in. 12 ½ in.

Melody Series Installation Guide
Create framing and opening according to the dimensions of your
fireplace. Ensure to attach the edging strips to the left and right
side of the fireplace
STEP 1.3 - Framing for three-sided installation
Framing Dimensions
Model W H D
DY-BTS35 33 ½ in. 29 ½ in. 12 ½ in.
DY-BTS40 39 ¾ in. 25 ⅜ in. 12 ½ in.
DY-BTS60 63 ⅜ in. 25 ⅜ in. 12 ½ in.

STEP 2
FOR ALL INSTALLATION METHODS:
Prior to placing the fireplace into the opening, ensure the two
brackets on the top and bottom of the fireplace are opened.
Secure the fireplace onto the framing studs with the ST4*40
screws provided
Melody Series Installation Guide

STEP 3.1 - Finishing for single-sided
installation
Apply finishing material around the fireplace viewing area, up
against the edging strips
NOTE:
The metal area above and below the viewing area of
the fireplace can be finished over with the finishing of
your choice, and does not need to be exposed.
Melody Series Installation Guide

STEP 3.2 - Finishing for two-sided installation
Apply finishing material around the fireplace viewing area, up
against the edging strips
NOTE:
The metal area above and below the viewing area of
the fireplace can be finished over with the finishing of
your choice, and does not need to be exposed.
Melody Series Installation Guide

STEP 3.3 - Finishing for three-sided
installation
Apply finishing material around the fireplace viewing area, up
against the edging strips
NOTE:
The metal area above and below the viewing area of
the fireplace can be finished over with the finishing of
your choice, and does not need to be exposed.
Melody Series Installation Guide

SUPPORT
For more product information, maintenance guide, and contact
information, visit:
support.dynastyfireplaces.com
©2022 Dynasty Fireplaces
Contact us:
support@dynastyfireplaces.com

THANK
YOU
WWW.DYNASTYFIREPLACES.COM