Dynasty Fireplaces Cascade DY-BTX Series User manual

Installation Guide for
Dynasty Fireplaces
Cascade Series (DY-BTX)
DYNASTY FIREPLACES

WARNING & CAUTION PAGE:
PLEASE NOTE:
• Power on and test the electric fireplace unit prior to installation
• This is a general installation guide - local building codes may
vary. Consult local building codes prior to installation.
©2022 Dynasty Fireplaces
Improper installation, adjustment, alteration, service or maintenance can
cause injury or property damage. Refer to the product user manual. For
assistance or additional information, consult a qualified installer.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the
heater.
DO NOT run power cord under carpeting. DO NOT cover power cord
with throw rugs, runners, or similar coverings. DO NOT route power cord
under furniture or appliances. Arrange power cord away from traffic area,
and where it will not be tripped over.
ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use
with an extension cord or relocatable power tap (outlet/power strip).
NEVER plug this heater into an outlet that is old, cracked, or has any
loose wires or connections. Plugging this heater into a faulty outlet could
result in electric arcing within the outlet that could cause the outlet to
overheat or catch fire

Cascade Series Installation Guide
1. Create framing and opening according to the dimensions of
your fireplace
Framing Dimensions
Model DY-BTX52 DY-BTX64 DY-BTX74 DY-BTX82
X19 ½” 19 ½” 19 ½” 19 ½”
Y48 ¾” 60 ¾” 70 ¾” 78 ½”
Depth 6” 6” 6” 6”
STEP 1

Cascade Series Installation Guide
2. Finishing material can be applied around the opening prior to
installation.
NOTE:
Ensure screws can be installed into the finishing material on the
left and right of the opening
STEP 2

STEP 3
3. Remove the magnetically attached front trim, and note the
location of the side mounting brackets and opening for screws
Cascade Series Installation Guide

STEP 4
4. Insert the power cord and ensure fireplace has power.
Place the fireplace in the opening and secure the left and right
brackets onto the wall with screws.
Cascade Series Installation Guide

STEP 5
5. Reinstall the magnetically attached front trim piece
Cascade Series Installation Guide

SUPPORT
For more product information, maintenance guide, and contact
information, visit:
support.dynastyfireplaces.com
©2022 Dynasty Fireplaces
Contact us:
support@dynastyfireplaces.com

THANK
YOU
WWW.DYNASTYFIREPLACES.COM