Dynasty Fireplaces Harmony Series User manual

Installation Guide for
Dynasty Fireplaces
Harmony Series (DY-BEF)
DYNASTY FIREPLACES

WARNING & CAUTION PAGE:
PLEASE NOTE:
• Power on and test the electric fireplace unit prior to installation
• This is a general installation guide - local building codes may
vary. Consult local building codes prior to installation.
©2022 Dynasty Fireplaces
Improper installation, adjustment, alteration, service or maintenance can
cause injury or property damage. Refer to the product user manual. For
assistance or additional information, consult a qualified installer.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the
heater.
DO NOT run power cord under carpeting. DO NOT cover power cord
with throw rugs, runners, or similar coverings. DO NOT route power cord
under furniture or appliances. Arrange power cord away from traffic area,
and where it will not be tripped over.
ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use
with an extension cord or relocatable power tap (outlet/power strip).
NEVER plug this heater into an outlet that is old, cracked, or has any
loose wires or connections. Plugging this heater into a faulty outlet could
result in electric arcing within the outlet that could cause the outlet to
overheat or catch fire

Harmony Series Installation Guide
1. Create framing and opening according to the dimensions of
your fireplace
Framing Dimensions
Model DY-BEF45 DY-BEF57 DY-BEF64 DY-BEF80
X22 ½” 22 ½” 22 ½” 22 ½”
Y45” 57” 65” 80 ½”
Depth 8” 8” 8” 8”
STEP 1

STEP 2
2. Prepare the electric fireplace to be installed in the opening,
secure the four L-brackets to the sides of the fireplace.
Harmony Series Installation Guide
ST4X8 Metal Screws

STEP 3
3. Place the fireplace in the opening and secure the L-brackets
onto the framing studs
Harmony Series Installation Guide

STEP 4
4. Apply finishing material around the fireplace viewing area
NOTE:
The metal area above the viewing area of the fireplace
can be finished over with the finishing of your choice,
and does not need to be exposed.
Harmony Series Installation Guide

SUPPORT
For more product information, maintenance guide, and contact
information, visit:
support.dynastyfireplaces.com
©2022 Dynasty Fireplaces
Contact us:
support@dynastyfireplaces.com

THANK
YOU
WWW.DYNASTYFIREPLACES.COM