Dynello Spaceball RS0402 User manual

1
2
3
INSTRUCTION MANUAL
THANK YOU FOR CHOOSING DYNELLO!
If you have any questions,
please go to www.dynello.com

INTENDED USE
Your Dynello-product has been designed for placement applications of
cargo straps during load-securing, as well as other applications
specified by Dynello.
FEATURES
This tool includes the following features:
1. Rubber ball
2. String / cord
3. Attachment hook
Safety warnings and instructions
• Do not use product for other than its intended use. Other uses
may result in serious personal injury.
• Stay alert, watch what you are doing and use common sense
when using the product. Do not use the product while you are
tired or under the influence of drugs, alcohol or medication. A
moment of inattention while using the product may result in
personal injury.

Safety of others
• This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the tool by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play
with the tool.
• Be aware of your surroundings and never use the product if there
is a risk that might result in dangerous situations.
Residual risks
• The Rubber ball(1) is made of natural rubber latex and may
cause an allergic reaction to people allergic to latex.

USE
WARNING! Do not use in areas in close proximity of moving objects,
such as vehicles, loading-trucks, bicycles etc. Moving objects can be
caught in the string and cause personal injury and damage.
1. Preparing the tool (Fig. A & Fig. B)
• Roll-out needed length of String(2) to reach over the truck-load.
The string should be rolled-out in a collected whole on the ground.
• Attach Attachment hook(3) to the hook on the cargo strap.
2. Placement of cargo strap (Fig. C & Fig. D)
• Before tossing the Rubber ball(1) over the truck-load, make sure
no people and moving objects are near. Toss Rubber ball(1) over
the truck-load. Do not stand on the String(2) when tossing the
Rubber ball(1).
• Go to the other side of the truck-load and pull the cargo strap in
place. Remove the Attachment hook(3) from the cargo strap hook.
3. After use (Fig. E)
• Roll-up the loose String(2) on the Rubber ball(1) after use.

All rights reserved. Copyright © Dynello ApS