Lifetime 0114 Quick start guide

®
5/5/2006
VISIT THE LIFETIME WEB SITE:
WWW.LIFETIME.COM
10” x 30” Shed Shelf Kit w/ 5 Shelves
MODEL #0114
ASSEMBLY
INSTRUCTIONS AND
OWNER’S MANUAL
Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
For Assistance, including missing or broken parts,
Call Customer Service at:
1 [phone]
** Do Not Contact the Store **
INSTRUCTION #1011560
Copy

BEFORE BEGINNING ASSEMBLY
Identify and inventory all parts using the checklist boxes on the Parts List. Keep the
hardware bags and their contents separate. If any parts are missing, call our Customer
Service Department.
PARTS LIST
AA 1009339 10” Shelf 5
Shelf Hardware Bag [1011395] 1
SA 1009118 10” Shelf Bracket 10
SB 1009115 Back Shelf Support 5
SC BS05900 #10 x 1/2” Pan Head Screw 36
SD BW01300 #10 Washer 21
SA
AA
SD
SC
SB

Shelf Installation
1
1001693 #2 Screwdriver (1)
1a
SC (30)
Insert Shelf Brackets (SA) into notches in any Wall Support
Channel. Place the Shelves on brackets and secure with #10
screws (SC) and #10 Washers (SD).
1b Install a Back Shelf Bracket (SB) to each Shelf with a #10 screw (SC). Line up the Bracket so that it will
connect to the wall in between grooves. Attach it to the bottom of the shelf. Then screw the Bracket into
the wall.
Insert Brackets into the inside
set of slots on the Wall Channels.
Otherwise Brackets will be too
far apart to support shelves.
1c Shelves may also be installed in between trusses to provide overhead storage. Rest a shelf between
two trusses. Attach shelf to Truss Channels through slotted holes in channels.
SD (20)
SD
SC
SA
Note: This is an interior upward view.
SC SC
Alternate Shelf Location
The shelves t length wise
inbetween the Trusses.
SB