E Instruments 1500 User manual

OK
Compliant with: EN 50379-1, EN 50379-2
Features
Combustion, Flue gas & Emissions analysis
 Calculating of stack heat loss and efficiency
 CO environment measurement
 Measuring differential pressure
 Draft measurement
 Pressure measurement in the gas supply pipe
 Store Smoke values, calculating mean value
Date: 7/08/14
Time: 10.10
Fuel: Natural gas
Altitude: 0 m
R.H. air: 50 %
O2 4.2 ٪
CO2 9.3 ٪
Ex. Air 20 ٪
T flue 374.2 °F
T air 60.4 °F
ΔT 313.8 °F
Loss tot 8.6 ٪
Eff. Tot 91.4 ٪
CO 148 ppm
CO amb 0 ppm
Draft: 0.05 inH2O
Smoke: 3 1 2
Aver n. : 2
——————————————————————
——————————————————————
——————————————————————
——————————————————————
——————————————————————
7/08/14
10:00
Eff. tot
% 91.4
Loss tot
% 8.6
ΔT
°F 74.7
T air
°F 15.4
T flue
°F 190.1
Ex. Air
1.25
CO2
% 9.3
O2
% 4.2
Memory
Average analysis
7/08/14
10:00
Print
Report
Model partial
Analysis average
OK
Memory 1
7/08/14
10:00
Print
Report
Model partial
Analysis In average
F1
Memory 1
In case the automatic print mode is set then the average analysis printing start automatically.
Conversely, after the sampling of the third analysis, the average analysis is shown, so that it can be sent to the
printer as explained in the following.
OK
Memory
Save
7/08/14
10:00
OK
Memory 1
Mode data logger
Samples 10
Interval
s 60
Automatically
saves the first
sample when the
set interval
expires, and so on
until the third
sample.
7/08/14
10:00
Eff. tot
% 91.4
Loss tot
% 8.6
ΔT
°F 74.7
T air
°F 15.4
T flue
°F 190.1
Ex. Air
1.25
CO2
% 9.3
O2
% 4.2
Combustion analysis
7/08/14
10:00
Eff. tot
% 91.4
Loss tot
% 8.6
ΔT
°F 74.7
T air
°F 15.4
T flue
°F 190.1
Ex. Air
1.25
CO2
% 9.3
O2
% 4.2
Combustion analysis
 1
120
KEYBOARD FUNCTIONS
KEYS FUNCTION
Activate the context keys shown on
the display
Enters the Memory menu
Enters the Print menu
Enters the Configuration menu
Previes the combustion analysis
Enters the measurements menu
Turns the instrument on/off
Quits the current screen
Selects and/or modifies
Confirms data
CONTEXT KEYS
CONTEXT KEY FUNCTION
ZERO the pressure sensor
Updates the measure
Saves the current measurement or
analysis in the memory location selected
from the ‘Select Memory’ menu
Starts the report ticket
Enters the Print menu
Stops the flue gas analysis
Enters the modify mode for the selected
parameter
Confirms the settings
Cancels the change/operation and
returns to the previous screen
Zooms the screen
Shows the details for the selected
parameter
‘Find’ function; starts a quick search for
the analysis to recall
OK
O
Esc

OK
Configuration
Fuel
7/08/14
10:00
Biogas
Propane-Air
Fuel oil
Diesel oil
Butane
L.P.G.
Propane
Natural gas
OK
7/08/14
10:00
Analysis
Operator
Information
Language
Instrument
Alarms
Diagnostic
Configuration
Restore
7/08/14
10:00
Fuel
O2reference
Autozero
Condensation
Measure units
Measures list
Configuration
Analysis
WARNING
F1: stop
Printing.
Please wait...
E Instruments respects the nature and the environment, therefore provides this quick user guide to
avoid any unwanted waste of paper.
However the complete manual for use and maintenance of the instrument is already available in
the USB stick (included),.
Respect your environment: think before printing the full manual on paper.
The magnets in the back of the instrument can damage credit
cards, hard drives, mechanical watches, pacemakers,
defibrillators and other devices proven sensitive to magnetic
fields.
It is recommended to keep the instrument at a distance of at
least 10” away from any of these devices.
402 Middletown Blvd, Suite 216, Langhorne, PA 19047 USA
Tel: [phone]; Fax: [phone]
[email protected] - www.E-Inst.com
 To view different test measurements, use ' ' key to scroll through the various test measurement screens.
WARNING! - Before proceeding with the combustion analysis remember to set the proper fuel.
Xair = Excess Air
ΔT= Differential Temperature (NET Temperature)
Tg = Flue Gas Stack Temperature
Eff. tot = Total Combustion Efficiency
Ta = Ambient or Incoming Air Temperature
Loss tot = Stack Losses
K000000000EJ 027995 010217
1500
COMPLETE MANUAL
ON USB FLASH DRIVE

7/08/14
10:00
Measurements
Ambient CO
CO
ppm
0
CO max
ppm
0
It is mandatory to perform the
instrument autozero in fresh, clean
outdoor air.
7/08/14
10:00
Measurements
Ambient CO
CO
ppm
0
CO max
ppm
0
Connect the gas probe to the instrument and perform
the measurement.
Wait 5 minutes.
7/08/14
10:00
Measurements
Draft
P diff
inH2O
0.000
O
7/08/14
10:00
Measurements
Draft
P diff
inH2O
- 0.020
O
Once the
pressure zeroing
is completed
insert the probe in
the chimney and
measure the draft.
AA SF--A
AAC TA03A
AAC KP01
AA SA08
7/08/14
10:00
Measurements
Draft
P diff
inH2O
0.001
O
Before zeroing the
pressure it is
mandatory to
REMOVE the
probe from the
chimney.
View & Save the
DRAFT
measurement.
ZERO Draft
Sensor
O
Save the
measurement
Draft
Ambient CO
7/08/14
10:00
Eff. tot
% 91.4
Loss tot
% 8.6
ΔT
°F 74.7
T air
°F 15.4
T flue
°F 190.1
Ex. Air
1.25
CO2
% 9.3
O2
% 4.2
Combustion analysis
UNI 10389
KEEP
PRESSED
FOR 2
SECONDS
UNTIL IT
BEEPS
WARNING!
During autozero DO NOT
insert the gas probe in the
chimney.
WARNING!
 Be sure all connections are tight to assure accurate sampling.
 It is important that water trap & filter be installed vertically to
prevent damage from moisture & particles to sensors.
 When conducting measurements, the water trap/filter
assembly MUST be in a VERTICAL position.
 When testing is completed, always drain the water
trap with any condensation (after EVERY test!).
AA AL05
Configuration
Air temperature
15/01/1
4
Probe T
°C
25.0
Air T
°C
-----
Air temp.
Analysis
While in manual analysis, holding pressed both keys and
makes the instrument switch off the suction fumes
pump and blocks the refresh of any current measure.
To switch on the suction fumes pump again and reactivate
the refresh of the current measure, press again the keys
and .
Configuration
Air temperature
15/01/1
4
Probe T
°C
25.0
Air T
°C
25.0
It saves the value,
acquired or entered
in the parameter
‘Air T’.
Configuration
Air temperature
15/01/1
4
Probe T
°C
25.0
Air T
°C
-----
A c q u i r e s t h e
temperature value
detected from the
sampling probe. That
value is reported in
the parameter ‘Air T’.
K000000000EJ 027995 010217