E Instruments CT 100 O User manual

Tachometers
CT 100 O - CT 100 C
ON : Switch-on
OFF : Switch-off
Escape : Return to previous screen
''On / off'' key
1x Level 1
2x Level 2
3x No backlight
''Function'' key
''Select'' key
1x : ''Hold'' : measure holding
2x : ''Min/Max'' : display of minimum and
maximum values from channel 1
since last re uest.
3x : ''Min/Max'' : display of minimum and
maximum values from channel 2
since last re uest.
4x : Back to held measure.
See table
''Functions available from main screen''
''Backlight'' key

NTang – CT 100O-100C – 01/08 A – We reserve the rigth to modify the characteristics of our products ithout notice.
1x
2x
3x
Beep 4x
Once returned to E Instruments, re uired waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE.
How to change battery
1. Remove the front part at the back of the device
2. Remove the old battery
3. Insert the new battery in accordance with proper polarity
drew inside the housing.
4. Replace the front.
Functions available from main screen
Select
probe
Select
unit
Press on key to scroll down probe types Validate with key
Press on key to scroll down units Validate with key
Press on key to scroll down minutes Validate with key
Press on key to activate or deactivate Validate with key
Automatic
shut-off
Distributed by:
E Instruments International LLC
172 Middleto n Blvd - Suite B201
Langhorne, PA 19047
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: .E-Inst.com