E Instruments AQ 100 User manual

Air Quality
Air Quality
AQ 100
Once the instrument is switched on , wait for dashes to delete
before measuring or setting
- - - - -
''Function'' key
''Select'' key
1x : ''Hold'' : measure holding
2x : ''Min/Max'' : display of minimum and
maximum values from channel 1
since last request.
3x : ''Min/Max'' : display of minimum and
maximum values from channel 2
since last request.
4x : Back to held measure.
See table
''Functions available from main screen''
ON : Switch-on
OFF : Switch-off
Escape : Return to previous screen
''On / off'' key
1x evel 1
2x evel 2
3x No backlight
''Backlight'' key

Ntang – AQ100 – 01/08 A –We reserve the rigth to modify the characteristics of our products without notice.
Once the instrument is switched on , wait for dashes to delete
before measuring or setting
Select
unit
1x
Automatic
shut-off
Press on key to scroll down units
2x Press on key to scroll down minutes Validate with
Beep 3x Press on key to activate or deactivate Validate with
Validate with
- - - - -
How to change battery
1. Remove the front part at the back of the device
2. Remove the old battery
3. Insert the new battery in accordance with proper polarity
drew inside the housing.
4. Replace the front.
Functions available from main screen
istributed by:
E Instruments Group LLC
172 Middletown Blvd - Suite B201
Langhorne, PA 19047
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Temperature & Process Instruments, Inc.
1767 Central Park Ave.
Suite 112
Yonkers, NY 10703
Phone: [phone]
Web Site: www.tnp-instruments.com