Eagle Peak 10 ft x 12 ft Wooden Gazebo User manual

EAGLE PEAK 10 ft x 12 ft Wooden Gazebo
INSTRUCTION MANUAL
Do not return your wooden gazebo to the place of purchase.
For warranty service, repair parts, or product questions please
email :[email protected]
Thank you for choosing Eagle Peak !

• The product should be placed on flat, horizontal ground.
• Ensure enough clearance around the product. Before assembling the product, find level
ground no less than 6' (1.8 m) away from any structures or obstructions, such as fences,
garages, houses, overhanging branches, laundry lines, or electrical wires.
• This gazebo is not to be regarded as part of a building/house structure. The gazebo is to be
anchored onto the ground for added safety. Do not assemble the gazebo on soil/earth
ground. It is best to build the gazebo on a hard, stable foundation. It is advisable to use
appropriate floor plugs (not provided) to anchor the gazebo onto the wooden/concrete ground.
• Some structures may require two or more people to install safely. Check for underground
utilities before digging or driving stakes into the ground.
• During installation, follow all safety warnings provided with your tools and use safety glasses.
• If you set up more than one gazebo, keep a minimum distance of 10' (3 m) between the
gazebos.
• Any assembly or maintenance of the product must be carried out by adults only.
• Arrange necessary manpower when assembling or moving the product.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• Keep children and pets away while setting up the gazebo.
• Check all nuts and bolts periodically to ensure bolts/nuts are tightened.
• Repairing and replacing parts should be done by a qualified technician.
• This gazebo is intended for decorative and sunshade purposes only, and it is not designed to
withstand harsh weather, including high winds, rain, and snow.
• Do not light any fires inside or near the product not!
• Stay calm if fire breaks out. Search for the nearest exit. Do not return to the gazebo before
firemen allow you to do so.
• Do not hang heavy weights on the roof frame.
• Do not climb onto the roof of the gazebo. Falling off the gazebo can result in serious injury.
• Keep the original packaging to store the gazebo.
Warning! To reduce the risk of serious injury, read the following safety instructions before
assembling and using the gazebo.
Please check with your local governing authority/local municipal codes regarding installa-
tion of structures before assembly.
Proper placement of your gazebo is essential.
Do not place the product underneath electrical lines.
Keep children away during assembly.
This product contains small parts which can be swallowed by children.
Keep fingers away from the places where they can be pinched or trapped.
Do not attempt to assemble the gazebo if any parts are missing.
Caution!

IMPORTANT:
• Please read and understand this manual before any assembly. Before beginning assembly of
product, make sure all parts are present. Compare parts with packaging contents list.
• If any part is missing, or if you have any questions, contact the service centre at 1-(844)-805-0378
(toll free).
• When assembling wooden parts, do not overtorque the bolts to avoid splitting the wood. See
image illustration.
• Place all parts from the box in a cleared area and position them on the floor in front of you.
• Remove all packing materials and place them back into the box. Do not dispose of the packing
materials until assembly is complete.
• Read each step carefully before beginning any assembly and make sure you understand each step.
If you are missing a part, please call our toll-free number for assistance 1-(844)-805-0378.
• Needed for assembly:（The following tools are not included）
Pistol Drill Tape Measure Hammer Screwdriver Ladder 5 people

B
C
C1
C2
C4
F1
F2
G1
H
I
J1
P
L1
L2
L3
L4
M1
M2
PARTS LIST
Description Sketch QTY
4 pcs
4 pcs
2 pcs
2 pcs
2 pcs
1 pc
1 pc
1 pc
6 pcs
6 pcs
3 pcs
1 pcs
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs
Base Cover
Base
Triangular
Connector 1
Triangular
Connector 2
Triangular
Connector
Big Roof Beam 1
Big Roof Beam 2
Roof Beam
Connector 1
Big Roof Middle
Beam
Middle Beam
Lower Connector
Support Tube 1
Hook
Big Roof Lower
Tube 1
Big Roof Lower
Tube 2
Big Roof Lower
Tube 3
Big Roof Lower
Tube 4
Big Roof Side
Tube 1
Big Roof Side
Tube 2

N
O
Q
R1
R2
S
T
U
Description Sketch QTY
P1
P2
Press Panel
Big Roof Cover 1
Big Roof Cover 2
Steel Pin
Catch
Roof Side Cover
Small Beam Presser
Big Roof Cover
Small Roof Cover
01
02
05
07
08
13
2 pcs
2 pcs
2 pcs
4 pcs
2 pcs
4 pcs
10 pcs
4 pcs
Inner Middle Beam
Inner Short Beam
（Long）
Post
Triangular
Support Beam
Outer Long Right
Beam（Long）
Outer Long Left
Beam（Long）
16 pcs
8 pcs
6 pcs
2 pcs
1 pc
12 pcs
2 pcs
4 pcs
Big Roof Small
Beam

03
04
05
06
08
10
11
14
15
Description Sketch QTY
2 pcs
2 pcs
2 pcs
4 pcs
2 pcs
4 pcs
4 pcs
2 pcs
4 pcs
Inner Middle Beam
Inner Short Beam
（Short）
Post
Arc Support 1
Arc Support 2
Triangular Middle
Support Beam
Triangular Frame
Slanting Beam
Outer Long Left
Beam（Short）
Outer Long Right
Beam（Short）
AA
BB
CC
DD
EE
FF
HH
HARDWARE PACK
Description Sketch QTY
Bolt M10*205
Flat Washer
M6
Screw M5*40
Nut M6
Screw M5*30
Bolt M6*15
Bolt M8*35
8 pcs
140 pcs
72 pcs
12 pcs
72 pcs
108 pcs
16 pcs

II
JJ
KK
LL
MM
NN
OO
PP
QQ
RR
UU
WW
Z1
Z2
Z3
Z4
Description Sketch QTY
16 pcs
12 pcs
24 pcs
8 pcs
84 pcs
24 pcs
8 pcs
8 pcs
8 pcs
2 pcs
14 pcs
14 pcs
2 pcs
1 pcs
2 pcs
2 pcs
Bolt M8*35
Bolt M6*55
Bolt M8*20
Non-slip Nuts
M10
Flat Washer
M8
Flat Washer
M10
Screw
M10*80
Stake Φ8*180
Bolt M6*35
Non-slip nuts
M8
M3 Drill
Bolt M8*50
Wrench M6
Allen Key M8
Wrench M8
Wrench M10

Step 1
B x 4pcs
08 x 4pcs C x 4pcs
EE x 16 pcs

Step 2
06 x 4pcs
05 x 4pcs
KK x 16pcs
07 x 4pcs
MMx 16pcs
B
C
C1
C2
C4
F1
F2
G1
H
I
J1
P
L1
L2
L3
L4
M1
M2
4 pcs
4 pcs
2 pcs
2 pcs
2 pcs
1 pc
1 pc
1 pc
6 pcs
6 pcs
3 pcs
1 pcs
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs

Step 3
T x 2pcs
04 x 2pcs
03 x 2pcs
KK x 4pcs
MM x 4pcs
CC x 8pcs

Step 4
02 x 2pcs
01 x 2pcs KK x 4pcs
MM x 4pcs

Step 5
CC x 64pcs

NN x 12pcs
LL x 4pcs OO x 4pcs
AA x 4pcs
Step 6

NN x 12pcs
LL x 4pcs OO x 4pcs
AA x 4pcs
Step 7
C1 x 2pcs C2 x 2pcs

Step 8
d1=d2
Rt ∠90
Assembly Tip on Step 8:
Please measure to make sure the length of d1 is equal to d2
before moving to next step to ensure a square frame and best
results. Keep the beam at right angles to the post, the post
at right angles to the ground, and keep the beam horizontal.
11 x 4pcs
10 x 4pcs HH x 16pcs
MM x 32pcs
II x 16pcs

Step 9
S x 12pcs
C4 x 2pcs
15 x 4pcs EE x 16pcs
WW x 6pcs
14 x 2pcs
13 x 4pcs UU x 6pcs
MM x 12pcs

Step 10
MM x 16pcs
UU x 8pcs
WW x 8pcs

Step 11
G1 x 1pc
F1 x 1pcs
FF x 4pcs
BB x 4pcs
F2 x 1pcs

FF x 2pcs BB x 2pcs
F1、F2 x 1pcs
Step 12

DD x 12pcs
I x 6pcs FF x 12pcs
JJ x 12pcs
Step 13
H x 6pcs BB x 36pcs