Eagle Peak EAGLE PEAK 13 FT X 15 FT User manual

Thank you for choosing Eagle Peak !
EAGLE PEAK 13 FT X 15 FT
Double Roof Hardtop Wood Gazebo
INSTRUCTION MANUAL

Global Shade Corporation offers a limited warranty that this product is free from defects in materials
and workmanship for a period of one (1) year from the original date of purchase. At its discretion, Global
Shade Corporation may provide replacement parts for defective parts to original purchaser after its
own review and examination. Original receipt or proof of purchase as well as proof of defect is required.
Global Shade Corporation will not be responsible for shipping costs incurred outside the continental
USA. Warranty is valid for the original purchaser for 1 year from the date of purchase and is not
transferable. Regular maintenance of wood, aluminum, and steel components is required to assure the
integrity of your product and is a requirement of the warranty. This warranty does not cover any
inspection costs.
This Limited Warranty does not cover:
•Labor for replacement of any defective item(s);
•Incidental or consequential damages;
•Cosmetic defects which do not affect performance or integrity;
•Vandalism; improper use or improper installation; acts of nature, including but not limited to wind,
storms, hail, floods, excessive water exposure;
•Structural or component failure due to snow loading.
•Minor twisting, warping, checking, cracking, or any other natural occurring properties of wood that do
not affect performance or integrity.
Global Shade Corporation’s products have been designed for safety and quality. Any modifications
made to the original product could damage the structural integrity of the product leading to failure and
possible injury. Global Shade Corporation cannot assume any responsibility for modified products.
Furthermore, modification voids any and all warranties.
All replacement products or parts will assume the remaining warranty of the original product. This
warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
This product is warranted for RESIDENTIAL USE ONLY. Global Shade Corporation disclaims all
other representations and warranties of any kind, express or implied.
Global Shade Corporation does not warrant against and under no circumstances shall Global
Shade Corporation be liable or responsible for any personal loss, injury, or direct or indirect
incidental or consequential damages resulting from the use of this product
This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state
or province to province. This warranty excludes all consequential damages, do not allow the limitation or
exclusion of consequential damages, and therefore this limitation may not apply to you, however, some
states/provinces do not allow the limitation or exclusion of consequential damages, and therefore this
limitation may not apply to you.
LIMITED WARRANTY
1

To reduce the risk of serious injury, read the following safety instructions thoroughly
before assembling and using the gazebo.
•Check with your local governing authority/local municipal codes regarding installation and permitting
of such structures before assembly.
•Use of personal protective equipment including gloves, safety glasses, and closed toe footwear is
recommended during assembly.
•Requires two or more people to assemble and install safely and correctly.
•The product is required to be installed on level solid surface and is not intended for unsecured use. The
gazebo is to be anchored to the surface with appropriate bolts or anchors. These anchors need to be
purchased separately for the specific installation surface. Do not assemble the gazebo on soil, earth, or
bare ground.
•Ensure enough clearance around the product. Before assembling the product, find level ground no less
than 6' (1.8 m) away from any structures or obstructions, such as fences, buildings, or overhead
obstacles.
•Do not assemble or install the gazebo underneath electrical lines or above underground utilities.
•Check for underground utilities before digging or driving stakes into the ground.
•This gazebo is not to be regarded as part of a building/house structure.
•All assembly and maintenance of the product must be carried out by adults only.
•Use all power tools and hand tools in accordance with their respective safety manuals.
•Keep children and pets away while setting up the gazebo.
•Wood framed gazebos are NOT flame retardant and will burn. Grills, firepits, and chimneas create a fire
hazard and should not be placed under or near your structure.
•Do not hang heavy weights from the roof frame.
•Do not climb onto the roof of the gazebo for any reason.
•Check all nuts and bolts monthly to ensure bolts/nuts are tightened.
•Check the metal hardware monthly to ensure there are no exposed sharp edges or rust. Sand sharp
edges or rust with sandpaper and apply touch up paint. Always use lead free paint that conforms to 16
CRF Part 1303.
•Inspect wood parts monthly. Sand any lifted grain or splinters and apply a sealant over the raw wood.
The wood frame is subject to weathering. As with all outdoor wood product, it is necessary to apply a
wood sealant to the wood frame to prevent premature weathering.
WARNING:
Needed for assembly: (The following tools are not included)
Pistol Drill Tape Measure Hammer Screwdriver Ladder
Level Framing Square Two or more people
2

3
Part List
Description Sketch
Corner Connector of
Big Roof Tubes
Short Top Tube of
Big Roof
Long Top Tube of
Big Roof
Fastening Piece of
Top Roof
Base
Base Cover
Beam of Internal
Long Side
Middle Beam of
External Long Side
Arc Support 2
Arc Support 1
Post
Beam of Internal
Short Side
Inner Middle Beam
Right Long Beam of
External Short Side
Left Long Beam of
External Short Side
Label
E3
E2
E1
D
C
B
18
16
11
10
08
07
05
02
01
QTY
4
2
2
1
4
4
4
2
4
4
4
4
4
2
6
FBevel Beam of Top
Roof 4
F1 Middle Beam of Top
Roof 2

4
Part List
I
L9-2
L10
L9-1
L9
L8
L7
L6
L5
L4
L3
J
Connector for Bevel
Beam
Short Beam of Top
Roof Short Side
Right Baffle Tube of
Top Roof Long Side
Left Baffle Tube of
Top Roof Long Side
Short Beam of
Top Roof Long Side
Middle Baffle Tube
of Big Roof
Right Baffle Tube
of Big Roof
Left Baffe Tube of
Big Roof
Middle Short Beam
of Big Roof Long Side
Lower Short Beam
of Big Roof
Upper Short Beam
of Big Roof
Connector for Middle
Beam
4
2
L10-1 Baffle Tube of Top
Roof Short Side 2
M1 Left Long Tube for
Mosquito Netting 4
M2 Right Short Tube for
Mosquito Netting 4
2
2
4
6
4
4
12
8
8
10
G
H
Bevel Beam of Big
Roof
Middle Beam of Big
Roof
4
10
Description SketchLabel QTY

P 1
Hook
Q7 4
Right Small Metal
Panel of Big Roof
Description SketchLabel QTY
P1 4
Left Metal Panel
of Top Roof
P2 4
Right Metal Panel
of Top Roof
P4 2
Middle Metal Panel of
Top Roof Short Side
P5 2
Left of The Center
Metal Panel of Top
Roof Long Side
P6 2
Right of the Center
Metal Panel of Top
Roof Long Side
Q1 4
Left Small Metal
Panel of Big Roof
Q2 4
Left Trapezoid Metal
Panel of Big Roof
Q3 4
Left Larger Metal
Panel of Big Roof
Q4 6
Middle Metal Panel
of Big Roof
Q5 4
Right Larger Metal
Panel of Big Roof
Q6 4
Right Trapezoid Metal
Panel of Big Roof
5
Part List

Part List
6
S3
R4
R6
R5
8
1
4
4
Metal Sheet 3
Middle Cover Plate
of Top Roof
Bevel Beam Cover
Plate of Big Roof
Bevel Beam Cover
Plate of Top Roof
S1
S2
12
8
Metal Sheet 1
Metal Sheet 2
Description SketchLabel QTY

7
Hardware List
Description
AA
BB
KK
II
EE
GG
HH
FF
8
48
28
16
72
22
16
258
Hex Head Bolt
M10x205
Washer
M6
LL 8
Non-slip Nut
M10
Self-tapping Screw
M5x30
Hex Head Bolt
M6x15
Hexagon Socket Bolt
M8x35
Hexagon Socket Bolt
M8x25
Self-tapping Screw
M8x35
JJ 34
Hex Head Bolt
M6x55
Hex Head Bolt
M6x20
SketchLabel QTY
CC 72
Self-tapping Screw
M5x40
DD 32
Nut
M6

8
Hardware List
0 1 2 3 4 5 6 7 8
Description
PP
QQ
RR
8
16
2
Stake
Φ8x180
Hex Head Bolt
M6x35
Drill
M3
SS 16
Hex Head Screw
M6x25
SketchLabel QTY
MM 16Washer
M8
NN 16Washer
M10
OO 8
Hex Head Screw
M10x80
Z2
Z4
Z1
1
2
2
Allen Key
M8
Wrench
M10
Wrench
M6

Step 1
9
16X
M5x30
4X
08
4X
B
EE
4X
C
STEP1 STEP2

Step 2
10
16X
M8x25
KK
4X
05
4X
07
4X
18

2X
01
2X
02
Step 3
11
4X
M8x25
KK
STEP1
STEP2

4X
01
2X
16
STEP1
STEP2
8X
M8x25
KK
Step 4
12

2X
2X
01 02
05 07
07
01 16 01
05
18 18
72X
M5x40
CC
Step 5
13

STEP1 STEP2
4X
2X
01 01
05
16
18
18
08
8X
M10
NN
4X
M10
LL
4X
M10x205
AA
4X
M10x80
OO
Step 6
14

8X
M10
NN
4X
M10
LL 4X
M10x205
AA
4X
M10x80
OO
STEP1
STEP2
Step 7
15
2X
01 02
05 07
07

4X
10
4X
11
16X
M8x35
II
16X
M8x35
HH
16X
M8
MM
Step 8
16
Tips:
Before step 9, please measure the length
d1 equal to d2. Ensure that the four legs
are completely straight on the ground, and
the beams are vertical to the legs.
Site Dimensions
161.7 in
138.8 in
213.1 in
213.1 in
d1=d2
i
d1
d2
Rt=90°

Attention:
Put part J on the beam without screw fixation.
Step 9
17
4X
I
10X
J 16X
M5x30
EE

Step 10
18
4X
M6x20
FF
16X
M6x15
GG
2X
E1
STEP1 STEP2
STEP3
2X
E2
2X
G
4X
E3