Eagle EAGLE-OH User manual

EAGLE-OH
OVERHEAD GATE OPERATOR
Eagle-OH Overhead Gate Operator
For Single Tilt-up Gates to 500 lbs
Eagle-OH=1HP Overhead Gate Operator
For Single Tilt-up Gates to 700 lbs

Eagle Access Control Systems, Inc. www.EagleOperators.com
2
UL Listings
Important Safety Information ................................................3
Requirements for UL Compliant Installation..............................3
UL 325 Classifications ...........................................................5
Required Entrapment Protection .............................................5
Installation
Operator & Gate Overview.....................................................6
Preliminary Information.........................................................6
Emergency Release ..............................................................7
Electrical Requirement ..........................................................8
Mounting The Operator .........................................................9
Set-up & Operation (Feature Selector)...................................12
Accessory Connections........................................................15
TABLE OF CONTENTS

Eagle Access Control Systems, Inc. www.EagleOperators.com
3

Eagle Access Control Systems, Inc. www.EagleOperators.com
4

Eagle Access Control Systems, Inc. www.EagleOperators.com
5

Eagle Access Control Systems, Inc. www.EagleOperators.com
6
Before installation, be sure that
 Gate springs are balance and that the gate of good construction
 Gates opens freely and there is no friction or obstruction between moving parts
 The Header and Ceiling are sufficient to support the gate and the gate operator
OPERATOR & GATE OVERVIEW
INSTALLATION
Gate Size & Weight Requirements (Gate must operate freely)
Operator Model Rail Length (Gate Height) Gate Weight
Eagle-OH 10’ Rail (8’ Gate) 500 lbs
12’ Rail (10’ Gate) 500 lbs
14’ Rail (12’ Gate) 500 lbs
Operator Model Rail Length (Gate Height) Gate Weight
Eagle-OH-1HP 10’ Rail (8’ Gate) 700 lbs
12’ Rail (10’ Gate) 700 lbs
14’ Rail (12’ Gate) 700 lbs
Eagle-OH & Eagle-OH-1HP
PRELIMINARY INFORMATION
10’ Rail (8’ Gate)
12’ Rail (10’ Gate)
14’ Rail (12’ Gate)

Eagle Access Control Systems, Inc. www.EagleOperators.com
7
EMERGENCY RELEASE

Eagle Access Control Systems, Inc. www.EagleOperators.com
8
Eagle-OH 1
Eagle-OH 2
Eagle-OH 1
Eagle-OH 2
Eagle-OH
Eagle-OH-1HP

Eagle Access Control Systems, Inc. www.EagleOperators.com
9
MOUNTING THE OPERATOR
INSTALLATION
Measure & Mark the Center of the Gate C
L
X
With the gate in the
open position, transfer
the center line to the
ceiling.
C
L

Eagle Access Control Systems, Inc. www.EagleOperators.com
10
MOUNTING THE OPERATOR (CONTINUED)
INSTALLATION
C
L
Mark the center line on the ceiling
C
L
Weld or bolt Header
Bracket at the center line.
C
L Optional Ceiling Bracket

Eagle Access Control Systems, Inc. www.EagleOperators.com
11
INSTALLATION
MOUNTING THE OPERATOR (CONTINUED)
With the Header Bracket attached, lift motor head into position.
C
L
Minimum 1/2” X 3-1/2”
Wedge Anchor

Eagle Access Control Systems, Inc. www.EagleOperators.com
12

Eagle Access Control Systems, Inc. www.EagleOperators.com
13

Eagle Access Control Systems, Inc. www.EagleOperators.com
14

Eagle Access Control Systems, Inc. www.EagleOperators.com
15
Position of
photo-eye
Relector

Eagle Access Control Systems, Inc. www.EagleOperators.com
16

Eagle Access Control Systems, Inc. www.EagleOperators.com
17

Eagle Access Control Systems, Inc. www.EagleOperators.com
18

Eagle Access Control Systems, Inc. www.EagleOperators.com
19

Eagle Access Control Systems, Inc.
12953 Foothill Blvd.
Sylmar, CA 91342
Toll Free: 800-708-8848
www.EagleOperators.com