EARNSHAW ES-0016 User manual

B) TIME SETTING
A) DISPLAY
Hour Hand
Chronograph Hour Hand
Minute Hand
QUARTZ CHRONOGRAPH WITH DATE AT 6HR POSTION
Second Hand
Pusher B
Pusher A
Date Window
Chronograph Minute Hand
Turn the crown until you reach the correct time.
2
12
30 60
Chronograph second hand
1 2 3
12
30 60
Pull out the crown to Position 3.
Push back to Position 1.
1
3
1 2 3
C) DATE SETTING
Turn the crown until you reach the correct time.
2
12
30 60
Pull out the crown to Position 2.
Push back to Position 1.
1
3
1 2

CAUTION: Never correct date between 9PM to 0.30AM.
D) TIMING MODE (INTERMEDIATE OR INTERVAL TIMING)
E) TIMING MODE
a. Simple timing function
30 60
1 2 3
12
30 60
1 2 3
Start
1
Stop
2
Reset
3
1Pull crown out to Position 3
All three chronograph hands are in their correct or incorrect zero position.
2Keep Pushers A and B depressed simultaneously for at least 2 seconds.
The center stop-second hand rotates by 360˚ - corrective mode is activated.

i) Push Pusher A to adjust the centre stop second hand
- Single step by short pressing of Pusher A.
- Continuous step by long pressing of Pusher A.
ii) Push Pusher B to adjust the next hands (hour counter hand).
iii) Push Pusher A to adjust the hour counter hand
- Single step by short pressing of Pusher A.
- Continuous step by long pressing of Pusher A.
iv) Push Pusher B to adjust the next hands (minute counter hand)
v) Push Pusher A to adjust the hour counter hand
- Single step by short pressing of Pusher A.
- Continuous step by long pressing of Pusher A.
vi) Push back the crown to Position 1 to finish of the chronograph hands adjustment (can be carried out at any time).
A
B
A
B
A