EARNSHAW ES-8058 User manual

A) DISPLAY
QUARTZ 3 HANDS CHRONOGRAPH -
24 HOURS INDIC A T O R
Chronograph Second Hand
Chronograph Minute Hand
Date
B) SETTING THE TIME
1. Pull the crown to position 3.
2. Turn the crown until you reach the correct time.
3. Push the crown backto position 1.
C) SETTING THE DATE
1. Pull the crown to position 2.
2. Turn the crown clockwise until the previous date appears.
* Do not set the date between 9:00p.m. and 1:00a.m.. Otherwise, the date may not change properly. If it is neccessary to set
the date duringthat time period, first change the time to any time outside of it, set the date and then reset the correct time.
3. Push the crown backto position 1.

D ) USING THE CHRONOGRAPH
This chronograph is able tomeasure and display time in 1/1 second united up to a maximum
of 1 hour.
Measuring time with the chrongraph. Press the buttons in the following order :
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand does not return to
the0 second positionafter the chronograph has been reset and after the battery
has beenreplaced.
1. Pull the crown to position 3.
2. Press pusher A to set the chronograph second hand to position 0.
3.The chronograph hands can be maneuvered rapidly by continuously pressing pusher A.
4. Push the crown toposition1.
*Do not push the crown to position 1 while the chronograph second hand returns to 12:00 (ZERO)
position.
*Hand stops onthe way when the crown is returned to position 1 and these positions are
recognisedas 12:00 (ZERO) position.