EARNSHAW ES-8083 User manual

A) DISPLAY
1 2
AUTOMATIC 3 HANDS MULTIFUNCTION
(DAY / DATE / MONTH / 24H)
B) WINDING THE MAINSPRING
Automatic winding watch can be hand wound by turning the crown in it’s normal crown position.
Wind 15-20 times and it will start tomove naturally after shaking slightly.
C) TIME SETTING
1. Pull the crown to position2.
2. Turn the crown to set hourand minute hands.
3. Push the crown backto position 1.
D) QUICK CHANGE CORRECT OR FOR DATE (Push “B” at 4o’clock position)
1. Pull the crown to position 2.
2. Pressing Pusher “B” moves the date forward by one day. You must not use this quick change corrector between 11:30 p.m. and 5:30 a.m.
because the automatic change mechanism is in operation between these times.
E) QUICK CHANGE CORRECT OR FOR DAY (Push “C” at 8 o’clock position)
1. Pull the crown to position 2.
2. Pressing Pusher “C” moves the Day Indicator forward by oneday.
3. You must not use this quick change corrector between 11:30 p.m.and 5:30 a.m. because the automatic change mechanism is in
operation between these times.
24
6
18
12
MON
JAN
31
Pusher“B”Pusher “C”
Pusher “A”
Day Indicator
Second Hand
Hour Hand
Month Indicator
Minute Hand
24 Hour IndicatorDate Indicator
Page 1 of 2

F) QUICKCHANGE CORRECT ORFOR MONTH (Push “A”at 10 o’clock position)
1. Pull the crown to position 2.
2. Pressing Pusher “A” moves the Month Indicator forward byone month.
3. You must not use this quick change corrector on the 31st of the month between 11:30p.m.and 5:30 a.m. because the automatic change
mechanism isin operation between these times.
G) SET DATE, DAY & MONTH
1. Pull the crown to position 2.
2. Continue rotating handsuntil 6.00a.m. Use the quick-change correctors to set the date (Pusher “B”), day (Pusher “C”) and month
(Pusher“A”). Use the crown to turn the hands forwards until the current date is reached. You have now set the correct date, day and
month.
NOTE:
This watch MUSTbeworn forat least 8 (Eight) hours each day to ensure itis fully wound.
An automatic watch will only wind when thewatch is on your wrist and your arm moves.
Winding thewatch by the crown will put power on the spring but not enough to allow thewatch to function fully.
If your watch stops overnight orloses time it means it is not being fully wound.
A) DISPLAY
1 2
AUTOMATIC 3 HANDS MULTIFUNCTION
(DAY / DATE / MONTH / 24H)
24
6
18
12
MON
JAN
31
Pusher“B”Pusher “C”
Pusher “A”
Day Indicator
Second Hand
Hour Hand
Month Indicator
Minute Hand
24 Hour IndicatorDate Indicator
Page 2 of 2