Earthworks Audio SR3117 User manual

SR3117
SUPERCARDIOID CONDENSER
VOCAL WIRELESS CAPSULE
Follow us on social media @EarthworksAudi
For more information, please visit
earthworksaudio.com or call 1-603-65 -2 33
Version 3.0, Last Updated 3/31/23

Thank you for purchasing the Earthworks
SR3117 Vocal Wireless Capsule
YOUR PURCHASE I CLUDES
1 SR3117 Capsule
COMPATIBILITY
 Shure: ULX-D, QLX-D, Axien
 Audio Technica: 3000 Series, 5000 Series, 6000
Series
 Lectrosonics: HH, HHa
 Line 6: V75, V55
SR3117
Wireless Capsule
Version 3.0, Last Updated 3/31/23
TROUBLESHOOTI G
If you encounter issues while using your Earthworks
Audio capsule, please make sure that
 Your microphone is connected to an active power
supply.
 The microphone is positioned at an appropriate
distance from the sound source.
 External noise in your recording environment is
kept to a minimum.
 Your recording space is at room temperature and
free of dust
If your issue persists after checking, please contact us
via our website.

ADDITIONAL TIPS
SR3117
Wireless Capsule
 Aim the SR3117 toward the intended vocalist and
away from unwanted sources
 (Maximum rejection is found at the 135-degree
point of the polar pattern.
 Place the SR3117 1-2 inches away from the vocalist’s
mouth for best results.
 Get closer to the SR3117 for extra bass response
 Place the SR3117 as far as possible from reective
surfaces
 Even though the SR3117 is treated to minimize
handling noise the best position for it is mounted
onto a microphone stand
 Do not cover any part of the microphone grille with
your hand as this will adversely affect microphone
performance
 Do not aim directly at your speaker or PA.
Version 3.0 Last Updated 3/31/23
The windscreen can be removed if it requires cleaning.
See details below.
CLEANING THE SR3117’s WINDSCREEN
All cleaning should be done with either alcohol wipes
or with a small amount of alcohol on a soft cloth. Make
sure any cleaned elements are completely dry before
reassembling.
A NOTE ABOUT THE SR3117’S INNER WINDSCREEN
The internal ne mesh pop lter is self aligning and it
stays in place because of the interference t. Be careful
when unscrewing the outer windscreen as the inner
pop lter may fall out
When putting it all back together make sure that it is
properly aligned and then simply screw the outer
sleeve back in pace.

SPECIFICATIONS
Frequency Response
20Hz - 20kH
Polar Pattern
Su ercardioi
Sensitivity
6.3 mV/Pa (-44 dBV/Pa)
Dimension
2.7" x 1.93
Weight
0.26 lbs (0.118 kg
Wireless Compatibilit
Shure: ULX-D, QLX-D, Axien
Audio-Technica: 3000 Series,
5000 Series, 6000 Serie
Lectrosonics: HH, HH
Line 6: V75, V55
SR3117
Wireless Ca sule
Version 3.0, Last U dated 3/31/23

WARRANTY
All Earthworks® produ ts arry a limited warranty (parts and
labor). Please register your warranty at: earthworksaudio.com/
register. If you have any problems with your Earthworks
produ ts, please onta t our warranty/repair department by
email at: [e-mail].
NOTE
This warranty only applies to Earthworks mi rophones
pur hased brand new. For mi rophones pur hased/re eived
se ond-hand, please onta t us via our website.
Version 3.0, Last Updated 3/31/2
37 Wilton Rd. Milford, NH 03055
[e-mail]
© 2023 Earthworks, Inc
COMPLIANCE REQUIREMENTS
SR3117
Wireless Capsule
Hereby, Earthworks Inc. declares that this product has
been determined to be in compliance with UKCA
requirements
The full text of the UK declaration of conformity is
available at the following site
https://earthworksaudio.com/support/documents/u
Hereby, Earthworks Inc. declares that this product has
been determined to be in compliance with European
Union requirements
The full text of the EU declaration of conformity is
available at the following site
https://earthworksaudio.com/support/documents/eu