EASEPAL EC-362R Manual

中国·厦门蒙发利科技集团有限公司
Xiamen Comfort Science &Technology GROUP Co., Ltd
Maintenance Service Manual
MODEL: EC-362R
By Customer Service Department

中国·厦门蒙发利科技集团有限公司
Xiamen Comfort Science &Technology GROUP Co., Ltd
C：Cut the cable ties and peel the tube, then find the socket of jacks of the kneading motor.
D：Take the socket of jacks and disconnect the wire of kneading motor.
E：Take off the screws and then we can take the kneading motor away
F：Get a new kneading motor and fix it to the frame.
G：Then adjust the height of pulley, make sure the pully and the wheel in the same level.
H：Fix the pully and make sure it can not move up and down, then fix the kneading belt.
6：Disassembly of the massage mechanism.
A：Take off the backrest pad first, then take off the rear cover & front cover of the backrest.
The socket of jacks

中国·厦门蒙发利科技集团有限公司
Xiamen Comfort Science &Technology GROUP Co., Ltd
B：Turn on the chair, and let the massage mechanism move to the middle of the backrest.
C：Take off the kneading belt.
D：Cut the cable ties and peel the tube,
E：Cut the cable ties then disconnect the connecter on the width inspection board.
F：Take off the four screws which fix the massage mechanism.
G：Turn the wheel to adjust the roller to narrow position, then take off the massage mechanism.
H：Take off the four screws to separate the tapping motor and the massage mechanism. Then we
can take off the massage mechanism.
The screws fixing the mechanism
The four screws that fixing
the tapping motor