Eastwood 55107 User manual

TIRE STORAGE TREE
INSTRUCTIONS
Item #55107

2Eastwood Technical Assistance: 800.343.9353 >> [e-mail]
The EASTWOOD TIRE STORAGE TREE features a light, compact design for quick and easy tire storage while retaining the ability to hold a full set of tires.
Steel–ball bearing Swivel Casters and a rugged steel frame will support up to a total loaded weight of 275 lbs. [124 kg.] yet is completely portable for
long-term storage of tires.
CONTENTS
COMPONENTS
(2) U-Base [A]
(1) Wheel Pole Upright [B]
(2) Wheel Poles [C]
(4) Wheel Rests [D]
(4) Swivel Casters (Threaded Stem Cap Preinstalled) [E]
(2) Locking Swivel Casters (Threaded Stem Cap Preinstalled) [F]
(4) Wheel Rest Pins [G]
HARDWARE
(2) M10x110 Shoulder Bolts
(4) M10 Washers
(2) M10 Lock Washers
(2) M10 Nuts
(1) 5mm Hex Key
(1) 14mm Flat Wrench
TOOLS REQUIRED
• 17mm wrench
SPECIFICATIONS
Maximum Weight Capacity: 275 lbs. [124kg.]
AA
BB
CC
DD
EE
FF
GG

To order parts and supplies: 800.343.9353 >> eastwood.com 3
READ INSTRUCTIONS
• Thoroughly read and understand this manual before using.
• Save for future reference.
TIRE STORAGE TREE CAN TIP OR COLLAPSE CAUSING SEVERE INJURY
• DO NOT attempt to mount a top-heavy load.
• DO NOT concentrate a heavy load to either side or end of the Tire Storage Tree. This can cause the balance to shift suddenly, tipping the
Tire Storage Tree and its load which can quickly cause severe injury and property damage!
• DO NOT exceed the rated 275 lbs. [124 kg]. weight capacity.
• DO NOT use to support humans or animals.
• DO NOT climb on the Tire Storage Tree.
• DO NOT use the Tire Storage Tree to support items other than tires.
• DO NOT attempt to transport this Tire Storage Tree while loaded by truck, trailer, or any other hauling method.
• Use only on a smooth, level, and clean work surface. DO NOT use on a sloped or rough textured surface, earth, grass, sand, gravel or
any other loose or unstable surface.
• DO NOT remove or cover any of the factory supplied labels or warnings! They include specific safety information that must be
communicated to future users.
FALL HAZARD
• Awkward, out of balance body positions may be attempted while trying to reach specific areas of objects placed on the Tire Storage Tree
during use. Failure to ensure proper footing can quickly result in a fall which could inflict serious personal injury or property damage.
PINCH/CRUSH HAZARD!
• This Tire Storage Tree has moveable components that can crush and pinch. Keep fingers, hands, and feet away from pinch points
when operating.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:

4Eastwood Technical Assistance: 800.343.9353 >> [e-mail]
ASSEMBLY
1. Align the holes on the back of the U-Bases [A] and the holes on the side of the Wheel Pole Upright [B]
(Fig. 1). NOTICE: Make sure the center caster holes are opposite of each other (Fig. 2).
2. Secure the two U-Bases [A] to the Wheel Pole Upright [B] by inserting the two M10x110 Shoulder
bolts, with M10 Washers, through all three members and tightening the M10 Nuts with Washers and
Lock Washers (Fig. 3).
3. Insert the Casters [E] up through the bottom of the U-Bases [A]. Insert the Stem Cap from the top
and hand tighten (Fig. 4). Use the supplied 5mm Hex Key and Flat Wrench to fully tighten the Stem
Cap onto the Casters [E] (Fig. 5). It is recommended to place the Locking Casters [F] on opposite
sides of the assembled base (Fig. 6).
4. Connect the Wheel Poles [C] and insert the connected poles into the Wheel Pole Upright [B] (Fig. 7).
5. Starting from the bottom hole in the pole, insert a Wheel Rest Pin [G] into the holes in the Wheel Pole
[C], assuring the Pin is resting on the pole within the grooved area on the Pin (Fig. 8).
6. Slide a Wheel Rest [D] down the pole with the flat side pointing up. Rest the Notches in the Wheel
Rest [D] on the Pin to secure it in place (Fig. 9)
7. Repeat the previous two steps three more times to assemble the remaining Wheel Rests [D] (Fig. 10).
FIG. 3FIG. 3FIG. 2FIG. 2
FIG. 1FIG. 1
FIG. 4FIG. 4
FIG. 6FIG. 6FIG. 5FIG. 5 FIG. 7FIG. 7
FIG. 9FIG. 9FIG. 8FIG. 8 FIG. 10FIG. 10
Center
Caster
Holes

To order parts and supplies: 800.343.9353 >> eastwood.com 5
TIRE STORAGE TREE USE:
• Remove all Wheel Rests except for the bottom Rest.
• Slide the wheel from the top down until it is settled on the bottom Wheel Rest.
• Follow the steps in the Assembly section to install another Wheel Rest in the next position on the pole.
• Continue to add tires and Wheel Rests until there is a Maximum of 4 tires on the Tree.
MAINTENANCE
• The Tire Storage Tree is finished in rugged powder coating which will hold its appearance for many years, however it is advisable to keep the fin-
ish clean and free from excessive dust and dirt.
• Keep the Tire Storage Tree in a clean and dry environment. DO NOT store it in or expose it to a damp or wet environment.
• Before each use, inspect all components for potential damage and proper alignment. Check all hardware for proper tightness.
• DO NOT use if damage is discovered.

6Eastwood Technical Assistance: 800.343.9353 >> [e-mail]
NOTES

To order parts and supplies: 800.343.9353 >> eastwood.com 7
NOTES

ADDITIONAL ITEMS
#43090 Eastwood Safety Goggles
#31504 Eastwood 6 Ton Jack Stand Set
#21297 Tillman Work Gloves
#22280 Eastwood 3 Ton Low Profile Heavy Duty Floor Jack
#31638 Eastwood Swing Arm Tire Changer
#31639 Eastwood Electronic Tire and Wheel Balancer
© Copyright 2022 Eastwood Automotive Group LLC 1/22 Instruction item #55107Q Rev 2
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: [e-mail]
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com